Reviews
Fits: HONDA CUB, HONDA MONKEY, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Easy to change carb position
Casting seems very strong, however the casting port hole for the engine side is not perfect. I'll need to use a Dremel to tidy up the port as can be seen in the photo. Otherwise I feel it will not produce as good as power as it could. Installation is very easy on monkey due to being able to position the carb however you like. Product was priced well just a shame about the casting hole. Webike is always very quick with shipping A+ View detail
Fits: HONDA MBX50, HONDA MBX50, HONDA MBX125F, HONDA MB80, KAWASAKI ZZR400, HONDA MB50, HONDA GB400, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA CRM80, HONDA FTR223, HONDA FTR223, HONDA FTR250, HONDA CRM80, HONDA CRM50, HONDA CRM50, HONDA CL400, HONDA CRF100F, HONDA CBX750F, HONDA CBX750F
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
High Camshaft, Exhaust System, and Fuel Conditioning........
After installing the EnduranceExhaust System, each gear shifted up 0.2 or 0.3 plus, and the acceleration feeling decreased and the warning light came on. When I installed the Endurance Exhaust System, each gearshift felt 0.2 or 0.3 speed up plus again, and the acceleration feeling decreased and the warning light came on! The warning light came on again even after removing the filter! What to do now, exhaust system, high camshaft, or removal? I was still greedy, so I installed a fuel adjustment system. I am still not satisfied with my greed, but I am feeling good now. View detail
Couplet-on
Exhaust System was replaced to increase intake efficiency.
Installed.
Reasonable Sub computer.
Because it has been converted to a Race vehicle, the Cowl can be removed and attached quickly.
It did not take long.
It is just like interrupting Coupler and connecting them.
The Instruction Manual is also Small size, but if you read it carefully, it is Large sturdy.
I put it in the Tail cowl, but it's a Small cowl.
Limit.
Installed along Harness.
The error signal Lamp is also an Option.
Personally, I don't think I want it.
I thought it was a good idea, so I didn't wear it.
View detail
Fits: HONDA FUSION SE, HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XR230 Motard (MOTARD), HONDA XR230 Motard (MOTARD), HONDA XR230, HONDA XR230, HONDA XR230, HONDA XR BAJA (BAJA), HONDA XR BAJA (BAJA), HONDA SL230, HONDA SL230, HONDA SL230, HONDA PS250
It worked fine.
No gasoline leaks, etc., and it fits perfectly. View detail
Fits: KAWASAKI FX400R, KAWASAKI FX400R, KAWASAKI GPZ400R, KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR 750 (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI ZEPHYR400χ (ZEPHYR), KAWASAKI Zr-7., KAWASAKI Zr-7.
I thought the performance would be the same as OEM...
It looks exactly the same as the OEM Product and is the same size as the OEM Product, but the performance...I don't know yet. View detail
It ran almost entirely on a pontoon.
I used it on a MONKEY with a GPX125 on it.
The included Manifold will interfere with a part of the Frame.
A Doughnut type ManifoldAdapter was used.
Setting is also changed to the third step for Needle and Pilot screw is changed to the third step for Pilot screw.
It ran normally with two times back, the highest speed was due to the break-in period.
I haven't driven at full throttle, but I've checked up to 85 km/h.
There still seemed to be room for more.
Early MJ #97.5
PJ#27.5
It's hard to see with my old eyes, but I think it was the numbers above.
View detail
Secondary Air Cancellation
This is a Kit to do secondary air Cancellation.
It is easier to work with if the Radiator is shifted.
Be careful to check the orientation and Gasket of the Valve you removed.
When you take it off and put it back on, what?
I thought I was in the clear, but I had the Manual.
I was able to install it.
It seems that removing Wiring causes an error, so I removed Hose.
Coupler remains connected.
The only weight reduction is the Hose part. I hope the exhaust efficiency will be improved!
Race vehicles and cannot be driven on public roads.
View detail
For those who are not sure about the purchase.
The difference between k&n and,
The thickness of the Filters is about twice as different.
To be honest, when I switched from OEM to SIMOTA, I felt a great improvement in dandruff, but when I switched from SIMOTA to k&N, like me, I didn't feel any difference.
Summary of differences
price
color
Thickness
weight
I had a chance to exchange my k&N for a cheaper one, and I wanted to compare the two, but I would give the SMOTA a higher rating and better cost performance.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Air Filter
When I bought it, I thought there would not be much change, but after installing it, I drove it on a mountain road in touring and it accelerates smoothly at low to medium speeds.
I guess I couldn't tell much at high RPM.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
Acceleration feeRing is better.
The cover of the air filter of MONKEY125 is very difficult to remove, but I think it is possible for beginners to replace it because of the manual. However, the filter is now smoother and has a smoother throttle response than before. However, the thickness of the filter is thin, and the sponge is not so fine, so it seems to absorb fine dust, etc., so I am concerned about the durability of the engine. View detail
For PWK carburetor
I was going to add PWKcarburetor, but the Accelerator Wire did not work well, so I bought this one.
The angle of the Adapter is just right, but the distance of the WireStopper of the Adapter is so long that the Accelerator Wire is not enough even if the Adjustment Screw is set to the shortest. Depending on the car model, it may be necessary to replace the Accelerator Wire.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA APE 50, HONDA XR100R (for competition), HONDA CRF100F, HONDA XR100MOTARD, HONDA XR50 MOTARD
Sufficient intake capacity
Installed on a XR100R with a new engine. The intake capacity seems to be sufficient, and the engine now turns smoothly at high RPM. On the other hand, the intake sound was louder than the exhaust sound during acceleration and at high RPM because the intake air was released instead of being filled into the box. View detail
satisfactory product
My Monkey 125 is equipped with a Takegawa full exhaust.
However, the increase in output was not that significant. So I thought about trying inhalation.
If you increase even 1 horsepower on a bike that has less than 10 horsepower, you can feel the difference...
I am satisfied with the result. -------------------------------------------------- -------- My Monkey 125 is equipped with Takega and Pool. But the increase in output did not touch so much. I thought about it. If you increase even one horsepower on a bike that is less than 10 horsepower, you can feel the difference. As a result, we are satisfied. Powered by Google Translator
View detail
Highly recommended
It is clearly designed to absorb better air compared to quality and texture information std I don't know about the feeling of use yet in the reaction of Stroll The difficulty of installation may be a bit difficult because the front cover needs to be removed Cost performance and comparison with other products Purchased and installed to maintain std condition rather than open intake WeBike packaging is always great, arriving in a week for delivery and packagingAbout Shipping and Packaging Purchasing concerns, precautions, or advice Small size screwdriver is required It is recommended to remove and install the fender to protect the scratch on the fender , Better torque comes from the engine View detail
For overhaul around carburetor
Put some in a Boa Ace mani
Used for thermal protection.
View detail
Fits: BMW F 800 ST ABS, BMW F 800 ST, BMW F 800 S ABS, BMW F 800 S, BMW F 800 R ABS, BMW F 800 R ABS, BMW F 800 GT ABS, BMW F 800 GT ABS, BMW F 800 GS ADVENTURE ABS, BMW F 800 GS ADVENTURE ABS, BMW F 800 GS ABS, BMW F 800 GS ABS, BMW F 800 GS ABS, BMW F 800 GS, BMW F 700 GS ABS, BMW F 700 GS ABS, BMW F 650 GS ABS, BMW F 650 GS
Affordable price
Installed on a F800GS with 13,000km.
As with the Oil Filter, select HIFLOFILTRO.
The low price compared to other brands listed on the site was a deciding factor.
The Oil Filter was made in Thailand, but the Air Filter says "Made in Germany".
Since it is Made In GERMANY, I expected that the quality would be good.
The machining accuracy is high, and it fits the Air Filter Box perfectly.
The mesh part of the Gold product has a larger hole than the OEM product, which may affect the air intake efficiency and air filtration performance.
Not enough actual driving yet to know what it looks like when running, but I have high expectations.
View detail
Purchased to match fuel economy.
I bought it to match the fuel tone.
I have purchased several different types to start setting and I recommend them for their quality!
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
Replace with new one
The new one will be replaced at the time of maintenance of the carburetor.
Quantity in 1pc. min. cheaper than HondaOEM Product:2pc. I can buy a Set, and since the performance is the same, I am replacing it with this one.
View detail