Reviews
be motivated
Performance has not changed significantly due to FI, but the sound is great.
Satisfied with motivation Sound
View detail
Water intrusion
I asked my favorite Motorcycle shop about this Air cleaner, but be careful because depending on the angle of the rain, water may enter the Engine!
and ad vise!
It looks like there was actually a Case that broke down because of it.
It would be nice if it didn't rain where you park, but be careful.
If possible, I would like to see Manufacturer take measures in this area!
I'm happy with it for normal running.
View detail
Parenthesis is better
I installed it myself and had no difficulty in doing so.
As for my impression of the product, the Silver has improved the parenthesis, and since the Exhaust System was also changed, I have the impression that the Torque has become thicker.
It was quite a powerful and good Customization.
View detail
Integrates into the original intake tube for an easy install
About quality and texture, I can confirm that the quality is great and that the materials used are stainless steel tube for the intake manifold and a cotton gauze air filter pod. About the feeling of use, Integrates into the original intake tube for an easy install. The longer then normal intake manifold looks trick with the air filter pod positioned below the left side of the fuel tank and also allowing for a better power delivery. Products to buy together, While looks and performance are improved over the original setup the ability to use the bike in all types of weather is not. Either adding a water proof covering or changing the filter for one that is water proof would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the filter kit for my installation was easier then other filter kits due to the stainless steel intake manifold integrating into the original plastic intake tube making the connection onto the throttle body easy. Cost performance and comparison with other products, The pricing of this product is great even though slightly higher then what is available from most of the other brands. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Might be a good thing for someone who often turns the Engine and rides it.
I installed it on my CROSS CUB50 and to be honest, it didn't turn out the way I thought it would. I installed it on my CROSS CUB50, and to be honest, it did not give me the feeling I was expecting. It is true that the power at high rpm is great, but I tend to use it at low and mid rpm range, so it was difficult to use.
It is a good thing to have for the fastest Attack.
View detail
Looks so neat!
The OEMAir cleaner did not look good, so I bought this item to refreshen it up. The sound is much louder than I expected, which is not so bad if the Axel is not turned up, but when the Axel is turned all the way up, the sound is amazing.
If the Exhaust System has a pleasant sound, it will drown out the sound of the person who uses it. I am satisfied with the clean look of the product. Please consider it.
View detail
Power Filter Kit from WirusWin
* About quality and texture, The intake pipe is made from aluminium, welding quality is not the greatest but the polished finish sure looks great next to the rest of the chrome on the Monkey 125. * About the feeling of use, Looks much better due to it's compact nature and metal finish then the bulky black plastic Honda OEM airbox that takes away from the rest of the good looks of the Monkey 125. The butt dyno says it performs befores better too and the graph attached from the manufacturer confirms this. * Products to buy together, Due to the included air filter not being resistant to water, either a replacement air filter from the likes of Sprint Filters that are waterproof or at least a water resistant sock from Takegawa is recommended so you are protected when you get court in the rain. * Difficulty of installation, The installation requires removal of the Honda OEM airbox but re-uses the angled plastic intake pipe, a mounting bracket secures to the frame for stability and the IAT and crankcase breather connect to the WirusWin portion of the intake pipe. The process was completed in 60 minutes with no difficultly. * Cost performance and comparison with other products, One of the first open intakes available for the JB3 model Monkey 125, priced well and I do prefer the front wrap around design but now that it is available you may consider the slightly cheaper option from Kitaco. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, Take a close look at the photo attached by the manufacturer of the right hand side where the aluminium pipe attached to the plastic pipe as it does not look the greatest and needs to be noted before you purchase the product. Use the product reviews to assist in making a decision on your purchase. View detail
About the difference in the air filter insertion diameter
Air Filter plug-in diameter φ38, whereas φ50 or so was included.
Installation was over a month old because we had hired an outside party to do the installation.
Webike could not even contact me to return it because it had been over a month.
I contacted WirusWin and hoped they'd take care of it.
We will not be able to respond to orders placed by other companies. And, contact me!
Although sold by other companies, products produced, packaged, and wholesaled by WirusWin
I'm sure you're right, but how would you respond?
I want them to be responsible for their own products, and I don't want Webike to put a time limit on initial defects.
Also, I was shown the Installation Instruction Manual, but with two or three photos on WhiteBlack Copy paper.
It was hard for a layman to understand.
I will never buy from them again.
View detail
I'm glad I put it on
I installed it on my CT 125 CT110 HUNTER CUB. the removal of the Manifold was a large problem, but I was able to install it without any other problems. 6 ports were opened beside the Air Filter to increase the intake efficiency, but the Torque was increased to an extent that cannot be compared with it. The compatibility with the exhaust system of SP Tadao is preeminent. View detail
Air cleaner kit
It looks good. From the driver of the car that stopped next to me. "I like it. When
I can even talk to them. I think it is a little bit expensive to
View detail
Air cleaner for jc92
[How is it used?
I've been waiting for about 4 months to receive my order, and I think the power is better than normal.
Was the one you received as per Image?
I thought it was cheaper than Image. Especially the Cover.
Was the installation difficult?
I didn't think I'd use it with Normal parts turned off, I can't turn it back to NORMAL, I have Hose turned off.
How was your experience with it?
I think I'm feeling powered up.
[Included Parts:were they on?
It came with an extension Hose and one Bolt.
[Was there anything that disappointed you?
Since there is no detailed Instruction Manual, the adjustment of the air volume is delicate.
Other items that would be helpful
Request I would like to see an Instruction Manual with detailed information.
View detail
Measures against secondary air contamination
I fixed the problem with the mounting bracket with my own modification, but the problem of secondary air contamination remains.
As you can see in the attached photo, I used 38φSiliconHose(180°Elbow) to make etc. diameter pipe, and implemented secondary air mixing measures.
I'm happy to get the original performance of the Power Filter, but if I have to go to this much trouble, it's much easier and more economical to use other parts.
View detail
Mounting Bracket does not fit * Requires processing.
There was no column for JC92 before, so I described it for EBJ-JC61 and ThailandSpec.MSX125, but if you fix it to the car body with the original mounting bracket, the Side cowl (Shroud) will interfere with the cowl and the cowl will not be attached.
You need to cut the mounting bracket and make your own craft as shown in the attached picture.
The photograph shows the situation in the middle of the second trial and error. Because the connection part with the Suction pipe of the Throttle body is only a fitment, secondary air enters by vibration etc. even with this.
I regret that I should have bought another company's Power Filter instead of going through this trouble.
View detail
Fits: SUZUKI ADDRESS110, SUZUKI Address 110
Caution! OEMAir cleaner must be processed!
First, a note of caution.
OEMIntakeHose is not reusable.
Because Air Cleaner BOX and Hose are also separated, the person who wants to return Air Cleaner BOX and does not have Coking material, etc. will exchange the whole Air Cleaner BOX. Please note!
? Cannot be poned. There is cutting processing as shown in ?
About the installation.
It is simply constructed by plugging the OEM IntakeHose into the included Stainless Steel tube.
The Stainless tube is thicker than the Intake Rubber hose, so it can hold more Garbage in the carburetor. If it is not good, Small insects etc. can also enter.
If you don't want to break the Motorcycle, you need to seal the connection here. I used Grip bond on the entrance side of the Intake and glued it to the stainless tube, then sealed it with heat resistant aluminum tape.
Once safely installed, the first thing you'll notice is the Clearance with Monoshock.
If you have an external Shock, it is likely to interfere.
I'm also going to put in a KITACO for DIO110 in the future, so I'll offset it a little more outside.
As for the sound, it is a combination with Beams HeatTitaniumSP, but the bass sound when Torque is applied from 40km/h to 40km/h became as loud as a big scooter.
If you don't open the Axel, it's quiet, but if you're driving on a national highway, you might get pulled over by a policeman…?
General Comments.
This is an Exclusive Design product, but it's poorly made.
The Instruction Manual is flimsy and hard to understand.
It requires a lot of processing.
There is no need to be Exclusive Design.
Looks and sounds alright.
View detail
JC92 needs to be modified.
I use it on my JC92.
It cannot be installed without processing.
If you fix the cowl with the mounting bracket, the side cowl (Shroud) will interfere with the cowl and the cowl will not be able to be attached.
I cut the mounting bracket and bought a pipe clamp and bracket at Mome Center.
I regret that I should have bought another company's Power Filter instead of going through this trouble.
View detail
Swish Air Cleaner
I got it yesterday and went to the bike shop and installed it today... The throttle response seems to be smoother and I feel a slight improvement in torque and throttle response...!! The design is also very good and it is much easier to wash the car than that..!!! ------------------------------------------------------------ -------- Yesterday it takes the mounting go on bike shop today ... Gatguyo the throttle response is binary softer felt that very little torque and improved throttle response ... !! Rather, it became very greatly appreciated design also is very convenient to wash .. !!! Powered by Google Translator View detail
Poor quality
poor quality product purchase and use it around 6 months time. the air filter is too heavy and the metal is not strong enough to support. think twice if you wanna purchase this item, make sure the roads you ride on is smooth like race circuit. Email once a day for four days to wiruswin but no reply from them, only manage to receive their feedback via webike customer service, thumbs down on this company View detail
I feel a fingering feeling...
Replace from Breeze type
Intake noise and appearance and rainy It seems that water is not going to be applied to Filter, so purchase (OEM was discarded - - - )
If this is the connection between Rubber and Body, I am worried about not sucking secondary air.
I was worried a lot about the connection part.
Weld distortion was quite good and the connection part was fairly challenging.
View detail
Delivery was extremely fast about 9 days to Russia! Packaging was great every part in its own bag! Quality is awesome! Fits good but it's necessary to cut off the part of the original intake which means that the return to the stock intake will be difficul
Delivery was extremely fast about 9 days to Russia! Packaging was great every part in its own bag! Quality is awesome! Fits good but it's necessary to cut off the part of the original intake which means that the return to the stock intake will be difficult and problematic. Sounds smooth and nice, really like it! I choose sports type of this intake because it look fits my exhaust! I also like a sticker that goes with it! Good price for a great product! View detail
good!
Installation is relatively easy, but it is more troublesome to remove OEM's Air cleaner Box ~
Is performance feeling a bit somewhat upward in performance?
Idling is not much different from OEM sound, but Axel on immediately produces Large sound (Lol)
Comprehensively satisfied (# ^. ^#)
View detail