Reviews
NS400 Carb rebuild
Well made part fits well with no issues, replacing the original plastic part. Finish on part is good, got the replacment rubber sealing caps to complete as the original rubber had gone hard after 40 years. View detail
It's shit.
I purchased it because of the mounting diameter Φ54, but the actual size Φwas only 45.
I couldn't get a direct fit on my SR400 CVcarburetor. It sucks. I tried to force it on and it deformed and I can't return it. It is a real piece of shit.
View detail
I thought setting was necessary.
BITO's Settled fcr,
what kind of state (Exhaust System, ignition system, etc.) I don't know if you did the Setting in the
It is unknown, so if you are particular about it, you will need a Setting that matches your vehicle.
As for the delivery time, it was originally scheduled to take about 3 months, but it arrived in one month.
View detail
Fits: HONDA PCX125 JF56, HONDA PCX150 KF18
Exhaust System replacement
I replaced it with YOSHIMURA's Exhaust System to see if it would have some effect. I was surprised to find that the overall acceleration was smoother and more effective. View detail
Fits: SUZUKI DR-Z400, SUZUKI DRZ400S, SUZUKI RMX250S, SUZUKI DRZ400SM 00-09
It is still in use after 2 years with little deterioration.
It was used in a Dirt-free environment.
Thanks to this, the Large size is usable without any deterioration.
However, the flexibility of the Material has been reduced in a certain way, so I repurchased it as Spare.
View detail
without a problem
Cheap ones are dangerous, so I wanted to buy a proper one.
It's working fine
View detail
After all, it is domestic quality!
I used a cheap overhaul kit for the ?Under-seat engine hole? on a VMAX1200 I got at an auction last year, and the engine was very sluggish.
I thought something else was wrong and readjusted it from one end to the other, but it didn't seem right, so I circled back around and redid it with KeyStar's Fuel Kit.
The result was a Large success, and it became Smooth as if it were different. It is a different level.
I used CHINA as I thought it was the quintessential Level there, but it is still not something I would use for the heart.
KeyStar's products are not cheap, but they are considerably cheaper than OEM products and come with a detailed fuel tone guide.
Refreshingly cleared up my long agonizing feelings. Thank you very much.
View detail
Fits: MOTOGUZZI V9 Bobber, MOTOGUZZI V9 all, MOTOGUZZI V85 TT, MOTOGUZZI V7 Stone, MOTOGUZZI V7 Special, MOTOGUZZI V7 Racer, MOTOGUZZI V7 IIIall models, MOTOGUZZI Stelvio 1200 8V NTX, MOTOGUZZI Stelvio 1200 8V, MOTOGUZZI Norge 1200 GT 8V, MOTOGUZZI 1400 all models, MOTOGUZZI 1200 Sport 4V, DUCATI Streetfighter S, DUCATI Streetfighter 848, DUCATI Streetfighter, DUCATI Hypermotard 939, DUCATI 848 EVO, DUCATI 1198 S, DUCATI 1198, APRILIA Shiver 900
Just interrupt the O2 Sensor's Wiring, so it should be easy, but it's not,
I installed it on my MOTO GUZZIV7III. v7 has a very thin gas setting and the idling is high, so it is very difficult to ride (for me) because the Axel pops out when I open it a little after running at a slow speed.
The W800 I had before this one was also too thin to drive. 。 Air cooling and exhaust Gas regulation. [Color] I guess we have no choice but to Clear.
The W800 was in good shape with a BOOSTERPlug to cheat the temperature, so I did a lot of research and searching to see if there was one for the V7 and came across this one.
It took a lot of effort to install, but after installation, the low speeds are calmer and the acceleration is smoother. It is no surprise that the engine has been thickened, but it now rides like the air-cooled BMWs I used to drive. 。 It's not a good idea to cheat on the gas emissions regulations, but considering how unwieldy those low speeds are, I can't help it.
View detail
Power Filter to Funnel.
The FCR Carburetor Body was changed from a Power Filter to a Funnel, so the Throw became thinner.
I decided to go with Large.
It is a KEIHIN OEM, so there are no quality problems and it is a good one.
I think I'd like the setting to be a little larger than that.
Large body looks good and I would like to run the rest and get it out.
View detail
FCR Carburetor Body as Funnel.
I was a little nervous about leaving it as it was with Funnel,
I bought this product
It prevents Garbage from entering the system with little change in appearance.
I think it's good
View detail
Leakage from Float Room
Gasoline started leaking from the Float Chamber of the FCR Carburetor Body and was replaced.
The leak has been contained.
View detail
NTB would be almost OEM.
I bought this to replace the AirCleanerElement on my TW200.
I think NTB can already be called an OEM Product.
View detail
Effectiveness is felt!
Exchange from OEM.
The OEM filter may have been dirty, but after replacing the air filter, the response and acceleration improved considerably.
Fuel economy also seems to have improved.
Since the CB1000R has a high degree of difficulty in replacing the Air Filter, I think I will ask the Shop to do it from now on.
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
KEIHIN Jet needle
Stable KEIHIN Jet needle.
I am satisfied with the quality.
View detail
Fits: SUZUKI Mollet, SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA RS (SEPIA RS), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ)
Good cosmetics! Frequent replacement is a good thing!
2-stroke motorcycles require frequent air filter replacements! No quality problems at all! View detail
FCR Carburetor Body to TMRMJN
Replaced from FCR Carburetor Body33.
Since I will be EngineBore up in the near future, I chose 38Φ of Large size.
Runs well enough with the plug in, but the plug is completely black. (Lol)
Smooth turning from bottom to top, no black smoke, but Plug is pure black. (Lol)
Compared to FCR Carburetor Body, but I think it is a very different carburetor.
Response is good and Axel seems lighter.
I have not been able to get Data on fuel consumption, but I don't think it is different from FCR Carburetor Body.
Installation is definitely easier with the FCR Carburetor Body.
TMR cannot be framed after Accelerator Wire.
Wire framing and then carburetor installation.
View detail
You can physically feel the horsepower increase.
I bought it thinking it would not work anyway, but after replacing it, the driving is totally different. It is easy to install. By the way, I am using the fine grit one, so I wonder what will happen if I change to the rough grit one. I am looking forward to it. Please see the official YouTube video of Mukawa for the installation. View detail
I don't know.
Used to replace an Air element that I don't know when I put it on.
It is also soaked in oil.
Above all, the price is cheap!
Performance seems fine to me.
And if it gets dirty, it can be cleaned.
View detail
Kitaco mikuni tm24 needle valve
Fast shipping,very accomodating,item is in good condition,original mikuni needle valve and the item is very secure.surely i will recomend this motorcycle site.and mostly i will order again..thank you so much and godbless View detail
It is a stable key Star.
It is a stable key Star.
If you get them individually, you can't afford such a Gold amount. (excluding Chinese imports)
One problem was that the gold needle hook connecting the Float and the Valve did not fit. I guess the carburetor body parts are different depending on the year.
View detail