Reviews
Kitaco mikuni tm24 needle valve
Fast shipping,very accomodating,item is in good condition,original mikuni needle valve and the item is very secure.surely i will recomend this motorcycle site.and mostly i will order again..thank you so much and godbless View detail
I used it with FCR Carburetor Body28.
It is for vm26, but I changed the Spigot and used it with FCR Carburetor Body28.
In the case of CHALY, you need to engage a 6mm Spacer made by GCraft or Minimoto under the Manifold or it will hit the Frame.
As a precaution, the inside of the Manifold should be cleaned well before use.
The Manifold I bought had visible Level chips on the inside.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB
Definite power up!
I had been riding on an OEM diverted PB16carburetor with a KITACOLight bore up kit to 75cc + KITACOHigh camshaft, but I replaced it with a KITACOPC20 for one more power feeling.
The replacement work is done while reading the manual that comes with the product.
The content is good, but the paper and font size are too small for my aging eyes (laugh).
I managed to read and install it successfully.
Recomendation that the Fuel Cock needs to be relocated and that the ON and Reserve positions should be Memo'd. Otherwise, after it is assembled like mine. Oh, no, I've got it backwards. I've got the hose connected. This is a great way to avoid the need to
Setting is the default setting (at MJ #85 SJ #35) I kicked the KICK anyway as it was, and the Engine was on in one shot.
I went out for a test drive as it was, but the normal air cleaner box did not seem to have enough air inflow.
This was addressed by making the Connecting Pipe for CUB90 and drilling a hole in the box to increase air inflow.
Then, it became a wonderful Engine that produces power well from low rpm and turns all the way to the top.
The quality of the intake manifold, Bracket, Gasket, etc. is good and we are very satisfied with the quality and performance.
It would be great if you could release the carburetor SettingData, hopefully only for your own product combinations.
View detail
![Pilot Jet (Slow Jet) [MIKUNI TMR/TDMR]](https://img.webike-cdn.net/catalogue/images/27965/451-3100100_TS.jpg)
CarburetorOH
CarburetorOH to replace parts, Size, changed one, down. View detail
Essentials when carburetor setting
This is a must-have for setting up the carburetor, as repeated insertion and removal of the carburetor always kills the packing on the intake manifold side.
The price is inexpensive, so there is no harm in buying a few copies.
View detail
Kitaco throttle spring
Thanks guys ,the spring is amazing it's doing the job so good ,kitaco as always,keep going the good work guys you are amazing View detail
![Main Jet [TK Round Type/Large]](https://img.webike-cdn.net/catalogue/13652/450-3090720_TS.jpg)
Fits: YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA BOXN, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA CHAMP80, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA CHAMP, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOG ZR
Stable KITACO
I used it to replace the main jet on my APRIO4jp5.
The OEM-style chamber and High Speed Pulley were running well, but I had to go out for a short distance on a very cold early morning during the New Year's holiday, even though I usually only travel short distances, and my piston started to hug.
I changed to OEM #72→#76 because I thought the fuel mixture was too low because the auto choke was working properly.
Compared to the original sound, the exhaust sound became more bass-like, and we concluded that it was still slightly thinner.
When the PistonCylinder is eventually damaged, we plan to Bore up the PistonCylinder, so this product will be useful in that case as well.
View detail
![Main Jet [KEIHIN Round Type/Small]](https://img.webike-cdn.net/catalogue/11305/450-3020750_TS.jpg)
Fits: YAMAHA VINO, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X, SUZUKI VERDE, SUZUKI VERDE, SUZUKI VERDE, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI STREET MAGIC, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC
Product # 450-3021000
It was purchased for the Honda Super Cub to adjust the fuel mixture after installing the whale 75, size 85. Everything is great, I recommend it to everyone to purchase. Purchased for a Honda Super Cub to adjust the fuel mixture after installing kit 75, size 85. Everything is great, I recommend it to everyone for purchase. View detail
Fits: YAMAHA VINO, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X, SUZUKI VERDE, SUZUKI VERDE, SUZUKI VERDE, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI STREET MAGIC, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC, SUZUKI STREET MAGIC
Hand Jet
It was purchased for the Honda Monkey to adjust the fuel mixture size 85. Everything worked out great, I recommend it to everyone for purchase. Purchased for a Honda Monkey to adjust the fuel mixture size 85. Everything fits perfectly, I recommend it to everyone to purchase. View detail
leak out of Oil
Oil leaks from O-ring between Cylinder and Case. View detail
Stainless Mesh Power Filter
[How is it used?
The OEMFilter modification was replaced because it reached the limit of intake performance. Originally, the OEMFilter was used for appearance because the Engine had been modified, but it was replaced because the Setting was no longer available.
Was the one you received as per Image?
I was looking for a Silver tone Filter that is not too flashy and not too noticeable, so it is just like Image.
How was your experience with it?
It was neither possible nor impossible, but the Size feel was just right. I don't think it will be helpful as I have a fairly iregular modification, but it was almost Exactly in terms of Size.
Left swivel of VM26 is not normally possible with 6VMONKEY, but we have modified it and installed it. Please use this as a reference only, as it is an exact installation in that position.
View detail
Fuel adjustment is easy.
Used for NINJA2 Helmet 50RSL used for Circuit Racing.
I chose this product because I was told by a trusted shop, AdVise, that this product would be sufficient for use in combination with the Slip-on Silencer.
It is a little troublesome to have to remove the Cowl to install it, but it can't be helped.
View detail
Fits: HONDA DJ-1, HONDA Lead 50, HONDA LIVE DIOSR, HONDA LIVE DIOSR, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA SUPER DIO, HONDA TACT, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA Giorno, HONDA SUPER DIO
Used to attach TM24Carburetor to POCKE
Used to attach MikuniTM24Carburetor to POCKE, KITACO Manifold (410-0012000) However, since the inner diameter of the Manifold side is 22mm, it is necessary to enlarge the inner diameter to 24mm using a Leutor to eliminate the step.
Material:Since it is Rubber, I am not sure how durable it is yet, so I will stock a spare just in case.
View detail
Fits: HONDA DJ-1, HONDA DJ-1, HONDA Lead 90, HONDA LEAD 50, HONDA LIVE DIOZX, HONDA LIVE DIOSR, HONDA PAX CLUB, HONDA DIO XR BAJA, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA G DASH, HONDA Giorno, HONDA JULIO, HONDA DIO
I didn't feel the effect ….
Old Motorcycle about 30 years ago (about 5,000 km on the road) So, I replaced it with a new one for the purpose of refreshment, but as I am insensitive, I did not feel the replacement. The installation is easy because it is screwed on, but it is not difficult to access the Lead Valve because it is necessary to remove various parts, but it is large. View detail
Required if you want Power over OEM
Installation is easy because it is Couplet-on. Simply select the specified MAP with the specified Spec. View detail
GEMMA125
Used on an 83 SEA BASSGEMMA 125.
The OEM air cleaner had deteriorated over time and the entrance from the carburetor had become hard to get into, so I had no choice but to replace it, but I was able to do it successfully with air conditioning.
It blew up well and the acceleration was good and the idling was constant, but the intake sound became much louder.
The 50 diameter is quite large for a moped motorcycle, so it interferes a little with the GEMMA125's rear fender, but it is within the range of large enough to be sturdy.
View detail
![Main Jet [KEIHIN Round Shape/Large]](https://img.webike-cdn.net/catalogue/13652/450-3030750_TS.jpg)
Fits: HONDA MBX50, HONDA MBX50, HONDA MBX125F, HONDA MB80, KAWASAKI ZZR400, HONDA MB50, HONDA GB400, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA CRM80, HONDA FTR223, HONDA FTR223, HONDA FTR250, HONDA CRM80, HONDA CRM50, HONDA CRM50, HONDA CL400, HONDA CRF100F, HONDA CBX750F, HONDA CBX750F
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
A definite improvement over oem reeds
Great product, I have used them for years, never had any problems and I can feel a difference in bottom end responsiveness. Kitaco Boyesen reeds are still a great option for replacing stock reeds for earlier and smoother power delivery. If your reeds are worn out/warped or if you dont know how old they are, its a good idea to replace them and these are a great option.webike offers it at a good price, it is a good choice instead of OEM. View detail
High Camshaft, Exhaust System, and Fuel Conditioning........
After installing the EnduranceExhaust System, each gear shifted up 0.2 or 0.3 plus, and the acceleration feeling decreased and the warning light came on. When I installed the Endurance Exhaust System, each gearshift felt 0.2 or 0.3 speed up plus again, and the acceleration feeling decreased and the warning light came on! The warning light came on again even after removing the filter! What to do now, exhaust system, high camshaft, or removal? I was still greedy, so I installed a fuel adjustment system. I am still not satisfied with my greed, but I am feeling good now. View detail
Fits: SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
KITACO Large Capacity Discharge Pump Injector
Exelente, Funciona nitido (MODELO F46A) Desde Republica DominicanaAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail