Reviews
NS400 Carb rebuild
Well made part fits well with no issues, replacing the original plastic part. Finish on part is good, got the replacment rubber sealing caps to complete as the original rubber had gone hard after 40 years. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
fcr28Overhaul
I purchased this when I overhaul fcr28.
I ordered the carburetor after discovering that it did not have a washer when I was cleaning the carburetor with rose.
View detail
OEM but cheap. if you want PWK28, get OEM!
I was thinking about purchasing PWK28, but there are different types of KITACO, LAFLOW, and this KEIHIN, and I am using KITACO now, so I was very worried because if the parts in it are different from KITACO, I will have to repurchase. I was very worried about it.
Inner Parts were identical to those of KITACO.
Main135Throw38NeedleN80FCutterWay3.5.
This is M2Spec. so you can choose the Idling screw from Both Sides. The price is cheaper than others, and if you want to Unit Purchase pwk28, OEM is the best choice! Recommendation!
View detail
Fits: SUZUKI DR-Z400, SUZUKI DRZ400S, SUZUKI RMX250S, SUZUKI DRZ400SM 00-09
It is still in use after 2 years with little deterioration.
It was used in a Dirt-free environment.
Thanks to this, the Large size is usable without any deterioration.
However, the flexibility of the Material has been reduced in a certain way, so I repurchased it as Spare.
View detail
without a problem
Cheap ones are dangerous, so I wanted to buy a proper one.
It's working fine
View detail
After all, it is domestic quality!
I used a cheap overhaul kit for the ?Under-seat engine hole? on a VMAX1200 I got at an auction last year, and the engine was very sluggish.
I thought something else was wrong and readjusted it from one end to the other, but it didn't seem right, so I circled back around and redid it with KeyStar's Fuel Kit.
The result was a Large success, and it became Smooth as if it were different. It is a different level.
I used CHINA as I thought it was the quintessential Level there, but it is still not something I would use for the heart.
KeyStar's products are not cheap, but they are considerably cheaper than OEM products and come with a detailed fuel tone guide.
Refreshingly cleared up my long agonizing feelings. Thank you very much.
View detail
Fits: MOTOGUZZI V9 Bobber, MOTOGUZZI V9 all, MOTOGUZZI V85 TT, MOTOGUZZI V7 Stone, MOTOGUZZI V7 Special, MOTOGUZZI V7 Racer, MOTOGUZZI V7 IIIall models, MOTOGUZZI Stelvio 1200 8V NTX, MOTOGUZZI Stelvio 1200 8V, MOTOGUZZI Norge 1200 GT 8V, MOTOGUZZI 1400 all models, MOTOGUZZI 1200 Sport 4V, DUCATI Streetfighter S, DUCATI Streetfighter 848, DUCATI Streetfighter, DUCATI Hypermotard 939, DUCATI 848 EVO, DUCATI 1198 S, DUCATI 1198, APRILIA Shiver 900
Just interrupt the O2 Sensor's Wiring, so it should be easy, but it's not,
I installed it on my MOTO GUZZIV7III. v7 has a very thin gas setting and the idling is high, so it is very difficult to ride (for me) because the Axel pops out when I open it a little after running at a slow speed.
The W800 I had before this one was also too thin to drive. 。 Air cooling and exhaust Gas regulation. [Color] I guess we have no choice but to Clear.
The W800 was in good shape with a BOOSTERPlug to cheat the temperature, so I did a lot of research and searching to see if there was one for the V7 and came across this one.
It took a lot of effort to install, but after installation, the low speeds are calmer and the acceleration is smoother. It is no surprise that the engine has been thickened, but it now rides like the air-cooled BMWs I used to drive. 。 It's not a good idea to cheat on the gas emissions regulations, but considering how unwieldy those low speeds are, I can't help it.
View detail
Power Filter to Funnel.
The FCR Carburetor Body was changed from a Power Filter to a Funnel, so the Throw became thinner.
I decided to go with Large.
It is a KEIHIN OEM, so there are no quality problems and it is a good one.
I think I'd like the setting to be a little larger than that.
Large body looks good and I would like to run the rest and get it out.
View detail
Leakage from Float Room
Gasoline started leaking from the Float Chamber of the FCR Carburetor Body and was replaced.
The leak has been contained.
View detail
NTB would be almost OEM.
I bought this to replace the AirCleanerElement on my TW200.
I think NTB can already be called an OEM Product.
View detail
Effectiveness is felt!
Exchange from OEM.
The OEM filter may have been dirty, but after replacing the air filter, the response and acceleration improved considerably.
Fuel economy also seems to have improved.
Since the CB1000R has a high degree of difficulty in replacing the Air Filter, I think I will ask the Shop to do it from now on.
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
KEIHIN Jet needle
Stable KEIHIN Jet needle.
I am satisfied with the quality.
View detail
Fits: SUZUKI Mollet, SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA (SEPIA), SUZUKI SEPIA RS (SEPIA RS), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ), SUZUKI SEPIA ZZ (SEPIA ZZ)
Good cosmetics! Frequent replacement is a good thing!
2-stroke motorcycles require frequent air filter replacements! No quality problems at all! View detail
You can physically feel the horsepower increase.
I bought it thinking it would not work anyway, but after replacing it, the driving is totally different. It is easy to install. By the way, I am using the fine grit one, so I wonder what will happen if I change to the rough grit one. I am looking forward to it. Please see the official YouTube video of Mukawa for the installation. View detail
I don't know.
Used to replace an Air element that I don't know when I put it on.
It is also soaked in oil.
Above all, the price is cheap!
Performance seems fine to me.
And if it gets dirty, it can be cleaned.
View detail
Kitaco mikuni tm24 needle valve
Fast shipping,very accomodating,item is in good condition,original mikuni needle valve and the item is very secure.surely i will recomend this motorcycle site.and mostly i will order again..thank you so much and godbless View detail
It is a stable key Star.
It is a stable key Star.
If you get them individually, you can't afford such a Gold amount. (excluding Chinese imports)
One problem was that the gold needle hook connecting the Float and the Valve did not fit. I guess the carburetor body parts are different depending on the year.
View detail
Easy air screw adjuster for 2-stroke carburetors
I'm using a 1995 Vespa px150 two-stroke. I replaced the bike's outdated carburetor with a Keihin pwk28 because it was too old. Due to the carburetor's confined location, it is quite challenging to adjust the fuel and air, particularly the air adjustment screw. The length of the screw body has increased since KN Aluminium CNC air screw was replaced, making adjustment considerably simpler. It's simple for me to manually change. In addition, KN's air adjustment screw is made of aluminum so it is very light, beautiful and has many colors to choose. So I might be thinking about using all the KN carburetor accessories to decorate mine. View detail
Fits: SUZUKI address 125, SUZUKI address 125, SUZUKI address 125, SUZUKI address 125, SUZUKI Address V125S, SUZUKI Address V125S, SUZUKI Address V125SS, SUZUKI Address V125SS
DAYTONA Turbo filter
I bought it as part of the oil maintenance because the previous owner had not done much maintenance and the filter was starting to rot. View detail
Fits: HONDA FTR223, HONDA NSF100, HONDA NSF100, HONDA XR250, KAWASAKI Zephyr 1100, SUZUKI 250SB, HONDA , HONDA CB750Four, KAWASAKI Z1 (900SUPER4)
YOSHIMURA's Review
High quality materials and craftsmanship:YOSHIMURA products are always of high quality, and this optional spigot is no exception. It is durable and provides reliable performance over a long period of time. View detail