Reviews
It's shit.
I purchased it because of the mounting diameter Φ54, but the actual size Φwas only 45.
I couldn't get a direct fit on my SR400 CVcarburetor. It sucks. I tried to force it on and it deformed and I can't return it. It is a real piece of shit.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
The packaging is too messy for the shipping!
I thought the shipping cost was high for the parts, but since they are precision parts, I thought they were carefully packaged, but they sent the products in a Vinyl bag with no cushioning material and a single paper bag, which was a big surprise.
I can only hope that there are no deficiencies, but I am anxious and displeased.
The product may be trivial, but the buyer should be aware once again that he/she is paying a Gold for the product.
That's all
View detail
Fits: SUZUKI AN125, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100, SUZUKI BANDIT400, SUZUKI VOLTY, SUZUKI VECSTAR150
Small
I see that Φ5 is the outer circumference. I mistakenly ordered it as the inner circumference.
I wish you had mentioned it.
View detail
Cracks soon.
As an indicator for a pwk28 dedicated to a 2-stroke engine, it may lack strength and rigidity against vibration. Power Filter, which is heavier, cannot be installed, and only lightweight Funnel can be installed. View detail
Fits: HARLEY-DAVIDSON SPORTSTER (with CVCarburetor), HARLEY-DAVIDSON BIGTWIN 88-06
WeBig is done.
I have been using WeBig for a long time, but the service content has ended in recent years.
They even send us broken and rotten products.
It wasn't like this in the past, but has management changed?
I would not buy this company's stock. (??ω?) ?
View detail
Fits: YAMAHA XJ650, YAMAHA XJ750, YAMAHA XJ650, YAMAHA XJ750
A-Top Carburetor Joint XJ650
It cannot be installed because it is facing the wrong way. View detail
It's supposed to be brand new.
After installation, the screw part is popped from the root. (Polish)
It's a handshake.
I need to buy another one.
It's off carburetor, so it's still good.
View detail
Purchase Comments
Purchased in October
There was a little bit of Rose Throw when the device was used.
Currently about 2,000k since use.
Rose tsuki is getting better and better.
It becomes intense and not stable at all.
It went back and forth from 500 RPM to 2,000 RPM, and so on,
Slow Jet、
Main jet.
To be confirmed.
Used with scratches on the Driver that can be recognized as a "Hadrill".
Also
Due to lack of spare Jet
To be purchased separately.
It was a failure.
In products that I can recommend
None
You should not make a purchase based on price point alone.
View detail
Fits: HARLEY-DAVIDSON SPORTSTER (with CVCarburetor), HARLEY-DAVIDSON BIGTWIN 88-06
This Shop ships very old inventory.
I received the product, but the Gasket was deteriorated and shattered. It was a condition peculiar to long-term storage.
I bought an air cleaner from Webig before, but the rubber of the air cleaner was pushing stiff due to the symptoms of long-term storage.
Are foreigners managing the merchandise and shipping?
They send it in too bad a condition that you can see right away.
There have been two in a short period of time, so I don't count on this Shop anymore.
Please take care of yourselves.
View detail
It's the worst
First of all, it cannot be used for external carburetors (CRcarburetorc.). Obviously, the dimensions are shorter than OEM, making it unusable. The normal Indicator can be used with OEM and external carburetors, but not this product. I don't even want to add a single "*" to it. I am sorry to say that I discarded it. View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
Built like a car, expensive.
It was a pity. The Air Filter is made the same way as a car.
This product is not an evolutionary-like product.
You can buy a car for much less.
View detail
Fits: Others Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
leak out of Oil
Oil leaks from O-ring between Cylinder and Case. View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
I bought an EFN and received EMS, and when I requested an exchange, I received EMS again!
I received the wrong item and then the wrong item again.
The other thing that bothered me was that the Needle made of Brass was not handled well and was quite corroded, although I am not sure if it was put in by someone with a lot of hand oil.
I am concerned even if the correct product is delivered because the product cannot be polished by Compound due to its precision.
First of all, I want you to send me the correct product immediately.
View detail
Durability is endlessly low.
PMC Material:Rubber products in general are not very durable anyway. This product is no exception. In my case, it ripped after 2 years.
And at this price.
Since the function of this Pipe is only to return the blowby gas in the Crankcase to the Air cleaner box, it is better to substitute oil-resistant hose instead of using this Pipe.
View detail
The carburetor leans too far forward.
The carburetor is tilted too far forward, the oil level is not stable, and the Rubber is not durable. View detail
Fits: HONDA Rebel 250, HONDA Rebel300, HONDA Rebel300
a little too short
It was too short and when installed, the carburetor and air duct could not reach the Air filterBox. It could not be used. View detail
Cracks in 6 months when used for commuting.
I had no choice but to buy this one because it is for SHIFT UPManifold and the diameter of Spigot is different from Manifold.
As usual, the quality of Rubber is so bad that Crack will be in place in 6 months.
I would have liked to have allocated the cost of putting in the engraving to the Rubber material.
It is really not a durable product.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
hopeless
High RPMs no longer extended and returned to OEM! View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
quality
It is a product, not a product, and I am surprised that Webike would sell such an inferior product as a product,
The product does not have the minimum quality required for the product (skinny, stretches after one use,)
The result is the same no matter who does it, since it is tightened by default Torque,
Are you sure you don't want to apply liquid Gas and install it? (There is no such instruction in the manual.)
After replacing 4 pieces, one leaked immediately, and the rest will leak soon after they heat up.
View detail