Reviews
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
CherryCarburetor Float Packing
OEMs are too expensive to buy, so if you're not sure...
Cherry has found a Float packing that she has been putting out!
It's a Commendation because it's reasonably priced!
So far, no leaks, etc.!
View detail
Fits: YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XVS950 BOLT C-SPEC 942cc All, YAMAHA XVS950 BOLT C-SPEC 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XV950R 942cc All, YAMAHA XV950R 942cc All, YAMAHA XV950R 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XV950R 942cc All, YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XV950 RACER 942cc All, YAMAHA XV950 RACER 942cc All, YAMAHA XV950 942cc All, YAMAHA XV950 942cc All, YAMAHA XV950 942cc All, YAMAHA SCR950 942cc All
Self-sufficiencyItems
This is an impression based on the assumption that I am rather insensitive.
I drove both on the highway and on public roads and experienced the effect compared to the OEM! I did not feel the effect compared to the OEM.
Fuel consumption is also within the margin of error, neither better nor worse.
Since the Air Cleaner Cover is covered, the Air Cleaner itself is not visible, and I think it is a self-satisfying part.
Sticker by YOSHIMURA is quite Parenthesis.
View detail
Trust
Reliable OEM Product.
for setting the two together
It's nice to know that these parts are available by mail order.
View detail
Now
Very fast shipping with ems, but a little bit dissapointed with the product received. A lot of scratch on the plastic part. Looks like used item. Need to repaint the item. Luckily the metal part is good. I can only give 3 star, its not cheap. Make sure to check the item condition first before post to customer. Thankyou View detail
Fits: HONDA Byte AF59, HONDA ZOOMER AF58, HONDA Smart Dio, HONDA Smart Dio AF56, HONDA CREA SCOOPY AF55, HONDA Byte AF59, HONDA ZOOMER AF58, HONDA Smart Dio, HONDA Smart Dio AF56, HONDA CREA SCOOPY AF55
PMP Air filter
I replaced it myself.
I replaced it with a replacement with no problems.
View detail
DAYTONA PC20 Carburetor
About quality and texture The quality is very good About the feeling of use be responding well Products to buy together PC20 Carburetor Difficulty of installation easy, simple Cost performance and comparison with other products There is not much difference from other products It's selling well at a good price About shipping and packaging It took a week and the package was excellent Any concerns, cautions, or advice when purchasing The DAYTONA PC20 Carbureter Slowjet is basically #38. APE100 requires multiple options to make the right choice for the normal engine View detail
PE24 carburetor
About quality and texture The quality is good and the packaging is excellent About the feeling of use The clip fits well Products to buy together BIG carburetor Difficulty of installation easy, simple Cost performance and comparison with other products There is not much difference About shipping and packaging It took a week and the package was excellent Any concerns, cautions, or advice when purchasing I bought two because the CLIP was bent while setting PE24 It's not easy to set it up It's too humid because it's summer View detail
Fits: HONDA CR125, HONDA CR250, HONDA RVF400, KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX80/II, HONDA RS125, HONDA RS250, HONDA ATC200, HONDA ATC200, HONDA ATC250, HONDA AX-1, HONDA CB-1, HONDA CB125T, HONDA CBR250R (MC17/19)
PE24 carburetor
About quality and texture The quality of #35 is a bit different. It's a bit longer About the feeling of use I haven't used it yet However, I bought it to find the best setting Products to buy together PE24 carburetor Difficulty of installation It's easy. You have to press it with a bit of forcefully Cost performance and comparison with other products I was embarrassed because the model was different from before I knew KITACO made a mistake, but it wasn't About shipping and packaging It took a week and the package was excellent Any concerns, cautions, or advice when purchasing APE100 PE24 is being set and used a lot in Korea So I bought it, but it is not easy to find the setting price View detail
To Restore
It works fine, but there is a slight gap and no air suction. View detail
Twin air from the past
I used to use Notebook Ill on my CRF250R, but the last one I bought went bad quickly, so I bought Twin air which I have been using on my Trail bike for a long time.
I honestly don't know the difference between OEM Product and Power up.
Motocrosser often washes Filters and needs durability.
I want it to last about a year.
View detail
Not absolutely necessary Parts
Purchased to put on forward with CUB.
The installation was a little strange, as it had to be pulled wire.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
SST is required around Chalk.
Material used for ChalkValve:It is a Plastic Cap, which I replaced because it was whitened, but SST is required to remove and install the ChalkPlunger itself. View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Areas of obsession
White Material attached to the head of the ROD of Acceleration Pump.:This is a Plastic Cap. In order to improve the operation of the acceleration pump, it seems that this cap is made to shake its head when Lever pushes the pump.
I feel a kind of obsession with these small parts when compared to the FCR Carburetor Body. However, it is not clear if it is a part that needs to be replaced.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Well torn.
RubberBoots are the bellows that cover the shaft of the acceleration pump. If they are torn, water and dust can enter the plunger of the acceleration pump.
Maintenance for replacing acceleration pumps is easy, but be sure to remember the parts structure of the plunger and assemble it correctly.
View detail
PCX Air cleaner (Other Brand Product) for Repair
I am using a commercially available air cleaner for PCX on my ADV150.
Purchased for Repair.
Ignore the detailed dimensions as it was originally designed for the PCX and has been diverted to the ADV150.
However, I would like to mention one point of caution.
I couldn't tell because it's not in the picture, but it's only used for 90° bending.
I bought it but one side is twisted.
The twist could not be determined from the photo.
(Section is not vertical, about 85° and about 5° Up)
Please be careful when judging from the photo alone (although it can be used with some ingenuity).
View detail
Requires care in installation
Used on GSX-R1000k6.
I was worried about the quality of the product because it is cheaper than other manufacturers, but the rubber part is thicker and more solid than OEM.
However, because of its thickness, the lid does not close when it hits some barbs on the Air cleaner's lid that are designed to reduce the Element of the lid. However, due to its thickness, the lid does not close when it is hit by some stick-like protrusions that are there to restrain the element of the lid of the air cleaner.
If I cut a few millimeters off the protrusion, it closes fine, but if I return it to OEM or try another manufacturer's, the element plays up and I have to replace the lid.
It felt quite forced, but I was able to tighten it and fit it in. I am not sure if the Element is distorted inside or if there is a gap, but I think Large is sturdy.
My impression of the replacement is that it does not feel dramatically different, and I think it feels good because it is cheaper than other Manufactures in terms of Cost and more efficient than OEM.
View detail
Fits: YAMAHA Super JOG Z, YAMAHA 7PS JOG Z, YAMAHA Met Inn JOG, YAMAHA Met Inn JOG Sports, YAMAHA Vino, YAMAHA AXIS90 All years, YAMAHA JOG90 90-97, YAMAHA 7PS JOG 91-92, YAMAHA JOG Z 90, YAMAHA Aplio (4JP5), YAMAHA Aplio (4JP7), YAMAHA Aplio (4JP8), YAMAHA Aprio II (4LV3), YAMAHA AXIS90 All years, YAMAHA JOG90 90-97, YAMAHA 7PS JOG 91-92, YAMAHA JOG Z 90, YAMAHA Aplio (4JP5), YAMAHA Aplio (4JP7), YAMAHA Aplio (4JP8)
Not sure how it differs from OEMFilter.
I put it on for a test because it is compatible with the OEM Air Filter.
I heard that it is best to raise the main jet about 5 positions, but I did not change the jet for the time being.
I have replaced the air cleaner box intake with KN Planning's Universal Product, so I think I am getting more air than with the NORMAL filter, but I am not sure of the difference with the Normal filter.
The fuel should be somewhat thin, but I'll ride it some more and see how it goes and check it with Plug burnout.
View detail
I don't think they change it that often, though.
Do you want to change PAJ that frequently? I think it's not difficult to fill it up as long as you keep the factory settings.
When replacing and installing, be careful not to drop or lose any parts, as they are small in size.
View detail
Fits: その他 TMR Carburetor Big Body Φ36-Φ41 / Small Body Φ28-Φ35
Necessary to fix Idle Adjuster to Float chamber
It would be helpful if you could include it in the LongIdle Adjuster for TMR as a separate accessory part.
In the case of TMR, it is difficult to lose as a top cover screw, so there is little chance of replacing it unless it is rusted or something.
View detail
Power Filter Replacement
Installed on Z125PRO
The DAYTONA Power Filter had various problems, so we installed a new Duct and installed this one!
I am satisfied that there is no more noise to worry about.
View detail