Reviews
Cracks soon.
As an indicator for a pwk28 dedicated to a 2-stroke engine, it may lack strength and rigidity against vibration. Power Filter, which is heavier, cannot be installed, and only lightweight Funnel can be installed. View detail
MJQuantity for Keihin PBcarburetor by SHIFT UP:Set
I used it in the Carburetor setting of the C50SUPER CUB.
Since there are six different types, I was able to find a good spot by changing it out, running, running and changing it back in. I am very happy with the purchase.
View detail
No durability
The quality of Rubber is poor and cracks immediately after 6 months. View detail
Xr100 with vm26
This manifold is just what I needed to fit a mikuni vm26 on my xr100. It's a high quality part and worth every penny! Will definitely order again! View detail
CUB to Blowby's extraction!
CUB I put it on my Blowby's and took it out. The price and construction are great. I would like to get one more. View detail
To install PWK on CB50
Used to install PWK on CB50.
OEM Side cover will interfere.
View detail
Cracks in 6 months when used for commuting.
I had no choice but to buy this one because it is for SHIFT UPManifold and the diameter of Spigot is different from Manifold.
As usual, the quality of Rubber is so bad that Crack will be in place in 6 months.
I would have liked to have allocated the cost of putting in the engraving to the Rubber material.
It is really not a durable product.
View detail
Six months of life expectancy with daily use
Used with PE24 on a commuter vehicle. I think half a year of life is too short even though it is used as a manifold for air duct of Mukawa and some bending force is applied to it. I don't know if there is a durability problem in the material of the rubber used or if it is an individual difference. For the time being, let's use it as a Race part. View detail
Carburetor setting companion
Carburetor setting changes slightly each time you play with MONKEY's Engine.
I bought this one because I couldn't find the number I wanted this time.
I didn't happen to have #80 or lower on hand, and since I use multiple carburetors, it was nice to have an intermediate number.
The price is reasonable.
View detail
I hate secondary Air.
VM26
I noticed that it was cracking.
I don't currently have a secondary Air, but I replaced it to get peace of mind.
I could have fooled around with liquid packing, but I took the peace of mind of a new one.
View detail
It is good when new - - -
KITACO's VM 26 Manifold is used for Ape 100
Keihin PE 26 is installed.
Because KITACO's RubberInsulator has failed
Purchased as for Repair.
When it is brand new, there is no problem
Secondary air generation occurred after 2 years ago,
Quantity : 2pc. I purchased a set of eyes.
A bit more durable Does anything matter?
I appreciate that there are such Repair Parts.
View detail
Misunderstand and buy
I wanted a 30 mm straight and purchased.
I should have checked and bought it well, but it was 30 mm and 32 mm straight.
Although it was One Side Kapacapa, since it became Just size when I gripped a 1 mm Rubber sheet well, I used it by tightening in Band.
As of now I can use secondary air without sucking.
View detail
I use it for KITACOVM 26.
I bought the KITACO product with Set, but the old MODEL arrived. It seems that there is also sex, this part was torn by Large. The product I searched for is here.
Even though aged deterioration on Material was unavoidable it was a terrible damage.
This product is of course dedicated so I could properly install it, but I still worry about the durability as it is in other people's impres. So I'm cheap and I'd like to stock a spare, but I will deteriorate without using it.
It may be only I do not know, but it is good to be another material.
I will not take any spare of this for Long touring.
View detail
If you think that both are 30 mm - - -
My motorcycle, both carburetor and insulator was 30 mm Meter, so I searched 30 mm Meter for Straight and made it to this.
But,
It was 32 mm Meter on one side. Because I am bad I did not investigate well so it can not be helped.
However, since it was able to install normally as it narrowed down by Band, I am using it.
I watch as I wish that I will not suck the secondary air.
View detail
It will immediately expire as evaluated by others
Other people have also written, but it was short soon.
It did not last six months.
There is no meaning if it is cheap or bad.
Is it a consumable item that is not severe?
View detail
[Webike Monitor] It is used for APE100+VM26. It is well gone out on an attachment Layout whether unreasonableness has started the headquarters article. It purchases as replacement parts.
[Webike Monitor] It is used for
APE100+VM26.
It is well gone out on an attachment Layout whether unreasonableness has started the headquarters article.
It purchases as replacement parts.
View detail
Although it is quite cheap compared with the manifold of the other company, since especially the engine performance was not necessarily inferior, it had been rescued.
Although it is quite cheap compared with the manifold of the other company, since especially the engine performance was not necessarily inferior, it had been rescued. View detail
It is used by the gorilla (12V). In order to attach a steering damper, in order to interfere, by that of the takegawa, it attached with the solution. Since it had missed on the banjo ? on the side, the steering damper was also attached well. S
It is used by the gorilla (12V).
In order to attach a steering damper, in order to interfere, by that of the takegawa, it attached with the solution.
Since it had missed on the banjo ? on the side, the steering damper was also attached well.
Structure of a fin is also smart and is large satisfaction.
View detail
It purchased for carburetor setting. two, the object for main jets, and the object for throw jets, -- having purchased . Trouble separated the inner partition a little by the sectional type. However, I think that a price is also cheap and requ
It purchased for carburetor setting.
two, the object for main jets, and the object for throw jets, -- having purchased .
Trouble separated the inner partition a little by the sectional type.
However, I think that a price is also cheap and required for carburetor setting.
View detail
It purchased to VM26 attachment. Whatever it might call it, it was cheaper than the elegance of the other company, and since it said individually that purchase was possible when rubber degradation was carried out, it decided. Although it is device
It purchased to VM26 attachment.
Whatever it might call it, it was cheaper than the elegance of the other company, and since it said individually that purchase was possible when rubber degradation was carried out, it decided.
Although it is device necessity, it is satisfied with normal air cleaner BOX use.
View detail