Reviews
Prevention of Garbage and insect infestation
Oil catch tank Large air open hose installed.
I was always worried that a bug or something might get into it, so this is a relief.
It is Exactly to the OD of Bridgestone's 8mm I.D. Oil Resistant Hose.
View detail
Fits: YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E, YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E
Cost and Performance
Power Filter, the standard Tune for intake and exhaust, Powerful.
The Power Filter makes the air flow smoother and provides air without stress to the throttle work, making the engine more responsive and increasing torque and power.
Throttle response when opening the axel has also been improved, and you will be surprised at the difference in the comfortable start.
Setting the carburetor and injector is essential for installation. After the carburetor and injector are installed, the power of the carburetor and injector can be experienced, but there are also Merit and Demerit.
Merit to be replaced by Power Filter
[Merit1] Power up The shorter the intake pipe is and the rougher the filter is, the more air resistance can be reduced by replacing it with an air cleaner. 。 Most OEM filters that use filter paper, etc., have low airflow per area and large intake resistance, whereas the mesh Power Filter has much lower intake resistance. 。 When the intake resistance is reduced, the negative pressure resistance when the piston is lowered during the engine intake process is also reduced, so both power and response can be increased. 。 The higher the RPM, the more air intake per hour, the larger the benefit will be, and as long as the fuel condition is well controlled, the power can be increased by replacing the power filter. 。
[Merit2 Sound change The Merit of replacing with the Power Filter is that the intake sound becomes easier to hear. 。 Normal air cleaner box is designed to reduce intake noise, so intake noise is barely audible 。 The bare power filter directly emits the sound of the engine intake, and this alone creates a sporty atmosphere. 。
[Merit3 Space-saving By eliminating the air cleaner box, which occupies a large volume of space in the motorcycle, the available space can be effectively utilized. In addition, it contributes to weight reduction. 。 Mopeds with less loading Space can increase their loading capacity, albeit slightly, by installing an Accessory Case! 。
It seems to be a Power Filter full of good things, but there is also this Demerit.
Power Filter Demerit
[Demerit1] When replacing the noisy Power Filter, not only the intake sound but also the blasting sound of the Engine and even the Mechanical Noise can be heard.
The air cleaner also serves as a silencer, and replacing it with a power filter will significantly reduce the silencing performance of the intake system, etc., so when the RPM is increased, the noise may be greater than the exhaust noise. 。 I like it (laughs).
[Demerit2] Low-speed Torque becomes thinner and harder to ride. 。 The Power Filter and direct carburetor certainly increase power by reducing intake resistance, but precisely this is only the result of the TorqueBand shifting to a higher RPM side. Therefore, the starting acceleration may seem weak, or the TorqueBand may lack the feeling of Torque when the Throttle is slightly opened, and the motorcycle may become difficult to handle.
[Demerit3] If the Power Filter has a nipple to install the blowby hose, there is no problem if the hose can be inserted there. However, it is illegal to release the blowby gas discharged from the engine to the large airflow because there is no installation point for a blowby hose. 。 Blowby gas is sucked out by the negative pressure of the intake air and is discharged because the replacement of the Power Filter or opening of the large air intake does not provide enough negative pressure as the OEMAir cleaner box does, and blowby gas cannot be sucked out as efficiently, The increase in the internal pressure of the engine crankcase prevents the piston from moving, resulting in power loss. 。 While replacing with a power filter will increase power by reducing intake resistance, it may also cause power loss by reducing blowby gas discharge efficiency.
Based on Merit and Demerit, I purchased KIJIMA's Power Filter this time, and it is not bad relatively speaking. In a word... it runs well (with Carburetor setting).
good point
◎Filter capacity, well treated joints, and durable performance.
◎Cheaper than K&N.
After Fire will not appear.
A bad point
◎ Cannot be used on rainy days. →Because it absorbs water.
◎Intake noise became annoying.
◎Carburetor setting is required.
◎Engine characteristics become closer to high rpm. →If I say that it has come to revolve, it does (laughs).
◎Cleaning will be necessary for the blisters.
Some people do not have the Merit to install the Power Filter from Demerit, but it depends on how you use it and the form you want to use it in.
The purpose is to set the intake and exhaust to match the current running conditions. 。 In such cases, we think the Power Filter is a logical part.
View detail
Installed on VIRAGO250
The size fits the intake of my VIRAGO 250 just right. The price is low and the quality is not bad, so I use it for other vehicles as well. View detail
It was new and had some kind of Stain on it.
I installed it on a K&N filter and it held tight. However, there was a 5mm large stain on the filter even though it was brand new, but the cleaner did not remove it. View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
Purchased for APE100 PD22
I had been using an Indicator from Mukawa, but it had deteriorated over time and was sucking secondary Air, so I bought it.
We also compared Mukawa, but decided to go with this one, which has a good reputation in Review.
I'm assuming it's consumable since I'll be attaching and removing the Carburetor for setting, but I'm hoping it will last a long time.
View detail
NORMAL Parts discontinued.
The OEM Product was discontinued, so I put on this product. The carburetor needs some adjustment, but I use it without any problem. View detail
Asymmetric shape is good
[How is it used?
NSR250R (MC21) I was looking for an air cleaner that matches the size of the TA22Carburetor (54mm).
The OEM air cleaner box was originally missing, so I would have preferred the OEM one, but I chose this one because used parts are very expensive and I basically don't ride in the rain.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
The TA22carburetor is so close between cylinders that a regular cylindrical one would interfere.
This product could be installed thanks to its Oval and One Side joint.
Installation is instantaneous as all you have to do is tighten the band.
I was a little concerned about the loose insertion before tightening the band, but once the band is tightened, it is firmly secured.
How was your experience with it?
NSR250R for Package (up to 89) but MC21 (90) But there was no problem.
It is a mystery why Carburetor is almost the same, but it is compatible up to 89. Is it because the shape of the air cleaner box changes and it is not confirmed yet? I think it is because the shape of the air cleaner box changes and has not been confirmed.
There was no particular interference with the Fuel Tank or Others components.
It is universal, but as stated in the Package, it seems to fit NSR250R/NS250/CB750F/CB900F/GSX1100S.
[Included Parts:were they on?
The tightening Bandetc. is also included in the package.
As long as you have a Driver, you can install it.
[Was there anything that disappointed you?
Not particularly
【Review】
The asymmetric shape is good for TA22.
It is difficult to say what the compatibility information is, but I am satisfied because it is cheaper than buying a used air cleaner box and filter.
View detail
คอยางนิ่มใส่กลับคอคาบูเรเตอร์ได้พอดี ทนต่อน้ำมันเบนซินได้อย่างดีไม่ขาดง่ายใส่กลับคอไอดีได้อย่างพอดีและทนทาน View detail
เป็นคอยางที่ดีมีคุณภาพอย่างดี View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
Difference between K507-602 and 604
48mm is already a Quantity:I've bought about 5pcs. and have no complaints at all, so I have high expectations for this one too.
With Mukawa and Minimoto, the Crack cracked and ended up not lasting a month, but with KIJIMA, several years are assured.
The most important thing to remember when assembling the Bolt is not to overtighten the Bolt.
The 48mm 1pc. was over-tightened, distorting and ruining the reinforcement plate inside.
By the way, besides this K507-602, there is another one called 604, but no one has mentioned what exactly is the difference.
The difference is the shape and position of the mountain that fits into the anti-dislodgement groove on the carburetor side.
This 602 is made to fit KEIHIN grooves as it says it is PE28 compatible.
When viewed from the carburetor slot, the mountain is slightly triangular in shape and deeply attached.
PWK28 is the same, and a small CR or FCR carburetor body can also be attached if it fits.
And 604, but it is VM/TV26 compatible and the mountain is round and attached in a shallow position.
TMR28 also seems to fit.
I see that the Rib dimension in Mikuni's Spigot ring dimension chart is different between KEIHIN and Mikuni.
There is such a difference, so make sure you buy the right one.
Especially note the carburetor that can be replaced by a Spigot.
Well, I think KIJIMA is a bit unkind… The dimension chart looks the same for both with a 35mm mounting diameter.
AlreadyQuantity:1pc. if you have a picture.
By the way, Hi-Chi Trading had a picture.
Good luck with WeBig.
View detail
Not the way it was originally intended to be used.
[How is it used?
YAMAHA XJR400R (2007) The AIS was used to blind the part connected to the air cleaner box in order to cancel the AIS of the
How was your experience with it?
The connection between the air cleaner box and the AIS was 12.5Φ but there was no lineup on the rubber cap, and I was wondering what to do when I found this.
Since this is where the air enters from the AIS to begin with, I thought a complete Blind was not necessary, and this one with Mesh could be substituted.
I intend to use it as it is, as it runs without any problems in use and Idlingetc. is stable.
At the time of installation, it is 14Φ and a little Large, so it is used while collapsing it with Clip.
[Points to note]
I removed it once after the test run and found that the rubber part was a little sore due to heat.
I'm a little concerned about how long it will take to degrade.
View detail
sufficient for one's needs
It is used for Daytona's φ12×φ17Breather Hose 650mm 6mm Diameter. It's a little tight to fit, but it's firm without any need for gluing.
The construction is in line with the price, and I don't feel that there is any special structure, but I have heard of cases of insects coming up from the hose, so I believe that this kind of cap is always necessary. However, I have heard of cases where insects have risen from the hoses, and I believe that such a cap is a must.
I am also concerned about the degradation speed of the rubber and the strength of the mesh, but nothing has changed in at least six months of use. At this price, I think it would be better to regard them as consumable items and replace them periodically.
View detail
Cospa best
Used for vm26 installation.
It is the best cospa
View detail
Fits: YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200
Early exchange
Replacing TW225E's.
The shape was Straight and differed in that the Pipe of the Blowby gas pointed downward.
When I put it on, the effect was great and I no longer have the symptoms of misfirea.
We recommend early replacement, at about the faded stage.
View detail
Lost.
I had lost the Tetoron Hose Breather Kit for Monkey that I had purchased previously, so I was able to purchase Rubber Only. View detail
Cannot be installed on Posh face Power Filter!
After purchasing the Posh face Efficient Air Filter, I purchased the KIJIMA AluminumLineGuard, but I just could not install it. I managed to install it by bending the lower part of the bolt hole with pliers and radio pliers, but I wish they had written in the product description that only K&N can be installed so that I would know immediately.
It's a shame
View detail
Quality is really good
It was easily replaced. As expected, the quality is really good. I think it will be strong to heat because it is a thick rubber. And the support was moderately modified to make it easier to use. And I attached Mooneyes Decal View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
KIJIMA KIJIMA Air cleaner
Used for NSR50.
Installation is not difficult and easy.
The air cleaner is considerably smaller than the OEM air cleaner, making it easier to maintain.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Idol adjustment
It is very easy to adjust the Idol without using the Driver. It is easy to install and well made, and I am satisfied. View detail