Reviews
Fits: Others Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Easy to change carb position
Casting seems very strong, however the casting port hole for the engine side is not perfect. I'll need to use a Dremel to tidy up the port as can be seen in the photo. Otherwise I feel it will not produce as good as power as it could. Installation is very easy on monkey due to being able to position the carb however you like. Product was priced well just a shame about the casting hole. Webike is always very quick with shipping A+ View detail
Fits: Others Universal
Broke after 3 months.
AF05E with AF35carburetor installed
Cover part is Material:Plastic, and I noticed that the Bolt was cracked from where it was stuck.
Fortunately, even if this part breaks, it is sucked in via Filter, so we have no choice but to use it as a normal Powerful!
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
I put it on a 75cc GORILLA.
I put it on a 6VGORILLA that I bore up to 75cc.
The Fuel Cock had rotted out of the OEM and had been replaced with an external one.
Change the two Bolts on the Head side to M6 25mm.
I just replaced the Accelerator Wire for Big carburetor and it arrived as is.
Power Filter is KITACO's 35-pipe
I took it apart and reassembled it as it was and tightened the ThrowScrew a little.
When I took it apart again after running it for a bit, I found iron powder in the float chamber.
I just cleaned and assembled it and it is running well.
The Choke Lever is now on the Exhaust System side, and it is difficult to touch.
Other than that, I have no complaints.
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
Carburetor is good; Manifold is problematic. Insufficient product description.
OEM Air Cleaner BOX cannot be installed, because it interferes with the OEM cook. Therefore, you will need a separate Manifold, Air Cleaner, and Throttle Wire, and considering the cost, you can choose another manufacturer's carburetor for the same price. If you consider MONKEY as the applicable car model, I think the explanation is insufficient. 。 The included Manifold has a Large inner diameter and the OEM ports and steps are Large. The OEM bolt is also too short to use. The problem with this product is not the carburetor, but the manifold that comes with it, the throttle wire that does not come with it, and the lack of explanation. View detail
Fits: HONDA MONKEYetc.Horizontal TypeEngineUniversal
It's something we can use!
Used for DAX.
The Carburetor can be oriented anywhere in 360 degrees, so the Clutch Wire and
Fuel Hose etc. can be avoided.
The Carburetor can be installed in the position of your choice, so it is easy to install.
Very user-friendly product.
I was relieved to find that there was no secondary air suction, which was a slight concern.
Other Brand ProductImmani in general:・・・・
Since the inside process is Decoration bumpy, it was covered with 300-grit paper.
Finish by polishing with No. 800 for cleanliness.
But I think this area is also one of the fun parts of playing with MINI4♪
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
just right (time, size, length, etc.)
I used it on my MONKEY with Initial ModelDAX70Engine.
The diameter is not too large and not too small, so it is very good.
However, because it interfered with Fuel Cock when I installed it, I used Light Manifold Set for pc20 of KITACO which I had left over without Indicator.
Main jet and Pilot Jet standards are
Main jet MikuniRound Type Special Large
Pilot Jet For MikuniTMR
can be used.
Setting will be adjusted later.
I hope this is helpful
View detail
It was better than I expected.
Stick with NORMALSpec.
I made this carburetor.
I'll just pimp it out for now.
The Engine has been started.
With a few tweaks, so does Idling.
It's stable.
The problem started to occur while the machine was in use.
I might get it.
I think it's a good purchase.
View detail
Even with a pontoon and screw adjustment, it's not good.
I bought the ASSY because it's cheaper than buying a packing set.
There were dents on the air cleaner side of the first carburetor that arrived, so I replaced it.
The next one I received was also a ding in the same manner, so the inquiry response was fine.
I'm not sure by which criteria you can say it's okay, but I'll take it.
I installed it on the MONKEY, but it's not in good shape at all, and I'm not sure if I can adjust the Pilot screw or not.
When I opened the Throttle instead of the Level, it came with Rose, and I thought it was just a defective product.
I reverted to the Normal cab that I had on.
It was a disappointing product, though I can't judge it by looks alone.
View detail
For those of you who are doing Restore, Recommends
It is almost the same shape as the OEM The shape is different, but the important part is almost the same shape
I put Float into PAcarburetor which I had originally, and it works normally I did
Performance is about as good as it gets as a normal Carburetor
I idled it by pontooning it to 6VMONKEY, but I noticed that it had a slightly darker burn to
It needs to be adjusted, but if you're into the OEM form, it's not a bad buy
View detail
Fits: HONDA Shirley 70, HONDA Shirley 50., HONDA Shirley 70, HONDA Shirley 50.
CHALY a 2 to PC 20
It was for VM 22 and 16, but it is diverted to PC 20 by self-responsibility. Since the Carburetor installation pitch is the same 48 mm as VM type Insulator, Cost performance is also available and we introduced this.
It was a good shopping because Exactly and Carburetor fit in Limit Space of CHALY A and did not interfere anywhere. Of course, OEM Cover is removed. Although the caliber was modest, it was easier to set out on the PC system than the Large caliber as if it was stupid. I think that it is intended for people who can adjust the story with carburetor and Head with the degree of correction.
View detail
Fits: HONDA Shirley 70, HONDA Shirley 50., HONDA Shirley 70, HONDA Shirley 50.
Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed
Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed Very poor quality. Very high weight. Poorly processed View detail
In exchange for a pure negative pressure carburetor, it attaches with a DJEBEL250 XC. an engine Response becomes good from the start of Throttle 開け to a high rotation area -- a Torque -- a ゴリゴリ 30 percent increase -- touch [ about ]. if it says with
In exchange for a pure negative pressure carburetor, it attaches with a DJEBEL250 XC.
an engine Response becomes good from the start of
Throttle 開け to a high rotation area -- a Torque -- a ゴリゴリ 30 percent increase -- touch [ about ].
if it says with the
engine sound -- フォーン [!! ] て感じ from ブブオーン.
Seemingly, about 30 km/L of
fuel consumption are running.
Since there is no long-distance race, it cannot say anything yet.
About the
products, although it is violent structure, operation is a problem pear.
The
instruction manual is a pear.
It is professional-oriented.
initial setting is Main-jet #138, slow #48, and Needle N80F.
In its environment, it was a quite deep eye.
Since it is compatible with
PWK, it is not troubled by Jets.
It sells also at what article store generally.
A cheap output Up, fuel consumption ぼちぼち, and a Black body are the best for making subject at a Cool and curiosity.
he also cannot but obtain
こりゃあ and cannot but buy it!
View detail