Reviews
DAXAir cleaner
Good cosmetics,
Mounting Bracket Location OEM and
Spacers are not required because of the difference.
View detail
In the Chinese VM Setting
[How is it used?
For some reason, Throw of Chinese VMcarburetor has this Type, so I used this one for setting.
Was the one you received as per Image?
The Sponge dividers were quite nice compared to the usual divider-only Packages.
It is good because Jet does not mess up inside.
Was the installation difficult?
Accuracy is adequate. There were no problems.
How was your experience with it?
Smallest SizeQuantity for SmallEngine Displacement Volume:I thought that with Set, I could Cover all of the Setting range.
It is said that OEMs are more accurate and better for jets, but if the mother company is a Chinese carburetor, I don't think it will be a problem.
[Was there anything that disappointed you?
None in particular
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Required for Carburetor setting
Packing is essential for carburetor setting, etc., which requires multiple carburetor body roses.
Quantities, since rubber packing usually dies when opened and closed before aging.:It might be nice to have at least 2 Sets.
View detail
PWK Type" For?
I was looking for replacement parts for a carburetor that was not leaking gasoline and I thought it might be overflow, and I found this one. I bought it because I thought it would probably be useful.
Float Gasket and other packings can be used.
Float also has a different shape, but I think it is Large sturdy.
The kit includes a Needle and Needle Holder, but the Needle Holder is different in size and cannot be installed. The difference in the diameter of the bleed holes can be seen when they are placed side by side. I can't install it, but even if I could, I am afraid to use it. I was swearing to myself that I should put this on even without ChalkBoots.
Buyers should check their own PWK's Size before making a purchase to avoid disappointment. Please be careful.
The Gasoline leak was not fixed, although it was attached where it could be attached. We are continuing with the repair work because we were able to eliminate one of the negatives for the time being.
View detail
Perfectly designed
[How is it used?
Purchased for MONKEYZ50J.
I wanted to install a MikuniVM22carburetor, but it interfered with the Tank, so I bought an Intac Manifold Variable Attachment. I thought it would be a good idea to buy a Minimoto product for the time being.
Was the one you received as per Image?
I thought it was as shown in the Image and well made, so I thought it was worth the price. One thing I did not expect was that the variable attachments were thicker than I expected.
Was the installation difficult?
Installation is simple:simply mount it with the depressed side toward the front of the vehicle and fasten it with the included dish Screw.
However, the included countersunk screw was too long and could not be tightened, perhaps because it was a 4LMONKEY, so I bought a shorter countersunk screw separately and installed it.
How was your experience with it?
It has been working fine with no leaks.
The carburetor in question, however, I managed to install it.
However, the thickness of the variable attachment is quite thick, so I tried various angles, but it was too high and interfered with the tank, so I could only use it in a certain direction.
Even in that direction, there is some interference with the tank when the chalk is raised, probably due to the structure of the carburetor. At any rate, I am glad I bought this Attachment because without it, I would not have been able to install the carburetor.
[Included Parts:were they on?
Attachment that matches the inside diameter of the Gasket and intake manifold?
[Was there anything that disappointed you?
The thickness is still Neck. It is well made, but it would have been 5 stars if it were thinner.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
correction of post (to a post)
I made a Screw Pitch mistake in the first Review, so I am correcting it.
KEIHIN's Slow Jet was M3.5×0.6.
The Slow Jet included is M4×0.7.
View detail
The product itself is good. However, it is partly different from the product description.
The carburetor itself has a good texture and can be used normally!
However, there is a difference from the product description.
I thought I had inadvertently over-tightened the 1st pc. and the Throw Screw Pitch was crushed, so I bought another one of the same carburetor and noticed that the Screw Pitch was different between the #35 that came with the DeFault and the #35 that came with the KEIHIN PC20 that I had on hand&. hellip;.
Perhaps the Slow Jet that came with it is M4×0.7 and KEIHIN's Slow Jet is M3.5×0.5.
However, the screw threads are shallow and the pitch is slightly different, so the screw threads on the body side are crushed when installing and removing for setting.
Incidentally, the product description states that KEIHIN-made jets can be installed.
Main jet was also Large sturdy in KEIHIN.
If you are purchasing, please be careful
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
Recommended!
Purchased because pc20 was not enough!
Setting was easier to produce than pc20.
CHALY requires processing
View detail
Used for PWK28.
Used for Chinese PWK.
It's a Jet, so there's nothing to write home about it, but it's cheap but made with precision.
I can use KEIHIN-compliant Jet for Chinese PWKs, which is very useful.
I think it is a necessity at the time of Setting.
View detail
Big carburetor to change!
CUB I installed it at the same time as Bore up. pc20's main jet and funnel can be used, so maintenance and customization is easy. View detail
ThrowSetting is difficult with 85cc.
I installed it for Replace because the overflow of the PB16carburetor in CUB90 was just not improving.
The pitch on the manifold side is the same and the carburetor will be attached as is, but the air cleaner side is 1.5mm shorter in diameter and the carburetor length is also shorter, so it is necessary to take some measures such as wrapping something around the carburetor.
Also, since the cook will be lost, it is necessary to add a 2-way cook with Reserve.
Since the Outer cable of the Accelerator Wire strongly interferes with the Main frame of the CUB, it is better to take some measures such as pivoting it slightly.
The thing itself is very good and accurately made.
The difficulty is that it is hard to set the SmallEngine Displacement Volume. 85cc CUB90 does not idol properly.
First of all, the notch at the bottom of the throttle valve is too large for the engine displacement volume, and the idle speed does not drop to about 2000 rpm. Setting does not come out this time.
It seems that the design of the Throw path itself does not match the Engine Displacement Volume, not because the bottom of the Valve has been cut off.
Idol is light on Brown, while 1/8th open is dark on Brown. This is a strange Setting, so it seems tough to replace the SJ that takes care of this whole range.
I have no choice but to give him the fuel mixture to match Idol, and it is like meditating on a thick 1/8 opening.
The 1/8 opening range used relatively frequently in city driving is thicker, so city driving fuel economy deteriorates slightly.
This is only when using 85cc, and once you get to 108cc, it becomes almost a non-issue.
The city driving fuel consumption is not too bad. This was confirmed by replacing the 85cc and 108cc Engines twice.
I think 125cc would be no problem at all.
From my research, it seems that it is not limited to Minimoto products, but PC20 itself is generally like that.
Therefore, we recommend using 108cc or more whenever possible.
Again, the product itself is good, no trouble after more than a year of heavy use.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
Good cosmetics!
[How is it used?
We decided to purchase the carburetor to replace the carburetor along with the Bore up.
Was the one you received as per Image?
Quality was not bad and comparable to domestic carburetors.
Was the installation difficult?
Without a swivel Adapteretc., the large body will interfere with the Engine.
How was your experience with it?
It also runs in the Setting there.
Main should be around 100, and Throw may need to be raised a little from NORMAL 15.
It is definitely easier to Set up than TM24.
[Included Parts:were they on?
Nothing else in particular.
[Was there anything that disappointed you?
I was disappointed that the Jets were Minor and could not be diverted.
▼Recommendation is made because it is inexpensive and has a large diameter compared to PC20.
View detail
Fits: HONDA MONKEY, Others , HONDA GORILLA, HONDA DAX
Recommended
Recommended!
It is the strongest of the costumers.
Choke Lever is slightly bent for installation.
View detail
CUB Chinese Engine88cc
Replaced the Carburetor that came with the Chinese Engine.
I was satisfied with Large because it got better just by pimping it out.
It was a nice shopping experience.
View detail
Quantity of Mikuni Maru Large:I was going to buy a Set and this is what I got.
Quantity of Mikuni Maru Large at POSH and other Manufacturers.:I think there was a Set, but before I knew it, there was only Minimoto, and while there are plenty of options for KEIHIN and other Jets, there are no less than Mikuni Maru Large.
By the way, for some reason, Mikuni Maru Large is just right for Dell'Orto's carburetor.
Jet will have a bigger hole due to wear and tear, so even if you don't change the number, let's replace it.
View detail
KEIHIN PC18/20 Pilot Jet 6-size Set
About quality and texture Quality, product finish, product composition, everything is good About the feeling of use I am setting the pc20 now. Because of the good configuration, more data can be found. Products to buy together pc20 Carburetor Difficulty of installation It's easy. We have to deal with the leaking gasoline Cost performance and comparison with other products Because it is made in Taiwan, I think the cost-effectiveness is excellent About shipping and packaging It took a week and the packaging is excellent Any concerns, cautions, or advice when purchasing I recommend you to buy it as a set It is cheaper It is made in Taiwan but the quality is really good, so the price is the best View detail
Pretty good!
With the common Chinese PC20Copycarburetor, the exhaust side is 20mm, which is actually a PC18carburetor, but I chose this carburetor because it says it has a 21.5mm exhaust.
It's made, but for the price it's very good!
Big carburetor is good, it will be very fast once Setting is out ^^.
MJ85,SJ35,Needle clip4/5 are OEM and Quantity:It was Set.
When installing on a CUB90, it is better to change to a Spacer or swivel type manifold because the Gasoline discharge part of the Float and the Engine, Accelerator Wire and Frame will interfere with each other if the OEM manifold is left as is. Also, if you use a funnel, the wind may cause the Axel to breathe when it is closed and opened. If you use a funnel, it may cause the wind to blow the Axel out when closing and opening the Axel.
View detail
carburetor
I was very impressed with the Setting just by pimping it to the Bore up engine. View detail
KEIHIN PC20
I bought it while installing a friend APE100 DAYTONA KEIHIN PC20 ------------------------------------------------ I bought a friend APE100 Daytona Keihin PC20. I also purchased SP TAKEGAWA products, but this product is more adjustable, so it's easier to adjust. Powered by Google Translato View detail
Can be done without interference.
If you put "with Cell motorEngine" on MONKEY, you will not be able to install carburetor, so you will need this in high probability.
It depends on the Tank, but I was disappointed that the only angle on my MONKEY was where the Fuel Cock was about to hit Limit.
View detail