Reviews
Fits: HONDA Giorno, HONDA jorio, HONDA G DASH, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA SUPER TACT
It didn't fit the GYROX mid-term.
It did not fit GYROX (TD01-17~).
The diameter of the thickest part is too thick and pops out even though it is shaved down a little to put it in.
I made my own Bracket and attached it with Rubber packing to hold it down.
View detail
Fits: HONDA Super DIO, HONDA Super DIO SR, HONDA Super DIOZX, HONDA Super DIO, HONDA XR Baja, HONDA DIO, HONDA DIO SP, HONDA DIO SR, HONDA G-dash, HONDA DJ1-RR, HONDA standup tact, HONDA Tact S, HONDA Johno., HONDA Lead 50, HONDA Joker 50, HONDA Broad 50, HONDA Cabina 50
Is the cast metal workmanship in line with the price?
Although it claims to be for introductory use, it does not come with an Instruction Manualetc.
The object seems to be a Cylinder dug for 49.9cc.
There was also a BALI removal in Cylinder.
The cooling fins? The cooling fin has a crack, or perhaps it did not flow into the mold properly, so I think it is a reasonable product.
On the intake side, etc., where no cutting was done, a powder-like substance fell out when the casting surface was textured and rubbed. Casting sand residue?
Recommendation is to clean it up once and then use it.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
It's neither good nor bad
I bought it because the OEM had been a Screw Mountain fool since I bought it. Well, it's expensive. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
strong battle (Type 1~3) For 13×38 Cost-effectiveness is delicate.
[How is it used?
Used for commuter cars with bore up kit 。
Was the one you received as per Image?
I had no choice but to buy it due to the end of sales of the same etc. cheap products.
I don't need ”5ML" embossing to resemble OEM gear.
Was the installation difficult?
It is super easy if you are familiar with handling a hydraulic press.
How was your experience with it?
Spec. must be changed to 14×38 at pulley and clutch spec.
[Included Parts:were they on?
At the very least, I would ask that an anti-dislodgement circlip be included.
[Was there anything that disappointed you?
The price of this product, which would normally cost less than 5,000 yen, is 8,000 yen, which is expensive.
Other items that would be helpful
Many items are missing on the sales side, so care must be taken with drive system customization.
For a popular bore up kit, pumping 13×37 is the best Spec.
View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA CRM50, HONDA MBX50, HONDA NS-1, HONDA NS50F
ns systemEngine gasket
The price was right there and all the Gasket was included. View detail
Fits: SUZUKI RG50, SUZUKI RG50 gamma, SUZUKI SMX50, SUZUKI TS50 Hustler, SUZUKI TS50 Hustler
Leaks quickly. Not so fast.
I wanted to make it a regular Yellow color Number, so I bought a new one and assembled it.
The OEM 50cc Piston had an intake recess, but this one does not. Why…
14.The speed did not change at all even though it should have gone up 8cc…
Despite the fact that the Torque wrench, Gasket, and other parts were assembled properly, we discovered that the Coolant fluid was seeping from the head right after the break-in period.
I'm like, "Hmmm. LOL!
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X
Installed for filler cap purposes
It's for the CYGNUS 4.5 model, but I installed it on MAJESTYS. 。
I installed it for the purpose of filler cap, although it can't be used as oil level gauge as the length of the level gauge itself is different due to different car models. 。 The Mission oil cap is also from KN, so I wanted to match it here! 。
Material:Aluminum so the texture is good 。 Installation is no problem. 。 When you change the oil, you can check it with the level gauge of NORMAL, so it is a replacement for appearance purpose.
View detail
![Gasket Kit For LEAD100 Big Bore Kit [LD03]](https://global.webike-cdn.net/photo/impression/31/3184ee415513f01c49c8344d97d8a2ccL.jpg)
Exhaust Gasket is ….
I bought it because I plan to Overhaul my LEAD 100 above the waist.
I usually buy them each at Rose, but the Gold amount is ….
So I bought KN's Gasket for the first time.
Quantity:I was a little worried about the quality of the product before I bought it, but I'm glad I did.
Base, Head Gasket and Exhaust Gasket can be used without any problem. ? It is
The asbestos is sandwiched by the genus Gold (and maybe Steel?).
Cylinder, isn't Steel bad for the part that touches Exhaust System?
Isn't asbestos supposed to touch and prevent exhaust leaks…!
Because I want to ask for the exhaust leak after assembling, I purchase only Exhaust Gasket separately.
Well, the amount of Gold is the amount of Gold, so I thought this is possible…lol
View detail
Fits: YAMAHA BWS100 (Bewith), YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA Grand Axis
Base Gasket Quantity in different thicknesses:Set
If you want to change the port timing on the base gasket, this is a good product to find out what thickness is best for you. This is a good product to find out what thickness is best for you.
I bought it to fit the Long Crankshaft of 52? It may be an error of the product, but it may be possible to cut the inside with Scissors etc. to some extent. If not, the inlet to the scavenging port may be slightly covered
View detail
Fits: HONDA GYROUP, HONDA GYROUP, HONDA GYROX, HONDA GYROX, HONDA GYRO CANOPY, HONDA GYRO CANOPY
What do you think …
I wanted it in a bit of a hurry, so I bought it in stock
I bought it because I thought it was a KN project and I was sure it was a KN project, but the contents were Honda OEM
Well, I don't particularly care for it …
View detail
Fits: HONDA GYRO CANOPY, HONDA GYROX, HONDA GYROUP
I think it's good.
Up to now, because I was riding with a Bore up, so I decided to buy a Bore Up Kit again because I could not climb uphill without this power to this Engine.
I think that it will be better if weight roller is changed, but the adjustment is Large strange.
View detail
It would be great if you sell us roses
I bought this product because I want Gasket of BeltCase which is the largest Large
With an OEM Parts Number, Belcase's Gasket alone will cost 2,700 yen - - -
Accuracy is not problematic and it is saved
It would be great if you would sell us roses - - -
View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NS50F, HONDA NS-1, HONDA MBX50, HONDA CRM50
At Restore
I wanted Head Gasket, but if I look elsewhere I set this so much this price
If you look at what you received by asking OK! ... Head Gasket is different ...
Certainly it can be attached to NS - 1 ... Yeah, it can be turned on ... We have to face it ...
I should have studied better
However, since there are many opportunities to disassemble, various Gaskets can be used, so I will be glad.
View detail
Fits: SUZUKI SEPIA, SUZUKI Address (All models), SUZUKI ZZ, SUZUKI LETS II (2Cycle), SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI Address50, SUZUKI Address50, SUZUKI Address V (All models), SUZUKI HI UP, SUZUKI HI UP, SUZUKI LETS II (2Cycle), SUZUKI VERDE
For those who want to suppress with a low budget
First of all I felt that the port's BALI is amazing that it is amazing. (Especially the Crank joint surface of the scavenging port)
Although it was also described in the handling Instruction Manual, taking BALI is mandatory.
Also, since the skilled worker is working on the Cylinder kit of this kind, the contents of the handling Instruction Manual are written only as necessary minimum (Tightening Torque and others are not mentioned) So, even if you do not have it yourself, I can not recommend it.
Nonetheless OEM waist upper set 1 / It costs only 3, so if you have someone who is confident in installation and you have a Service Manual and want to keep it on a low budget, it may be good. (BALI removal etc etc. It takes time and labor)
View detail
I will install my car because of I change new 90 cc. engine. In Thailand cannot buy this and find difficult . I like this website.
I will install my car because of I change new 90 cc. engine. In Thailand cannot buy this and find difficult . I like this website. View detail
Fits: YAMAHA Horizontal TypeEngine JOG 90 series, YAMAHA Horizontal TypeEngine JOG 50 series, YAMAHA YV50 Z II, YAMAHA JOG90, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA VINO(2Cycle), YAMAHA SUPER JOGZ, YAMAHA APRIO, YAMAHA APRIO, YAMAHA AXIS 90, YAMAHA BWS100(BWS), YAMAHA Horizontal TypeEngine JOG 100 series, YAMAHA Remote controller jog, YAMAHA CYGNUS X, YAMAHA APRIO, YAMAHA GRAND AXIS
KOSO -- although the Kick pedal was used round and round, since a Rust began to have floated in a Plating, it changed into the STAGE6 Kick pedal. STAGE6 Since the Plating is polite, the direction of a Kick pedal uses for a long time. Since the s
KOSO -- although the Kick pedal was used round and round, since a Rust began to have floated in a Plating, it changed into the STAGE6 Kick pedal.
STAGE6 Since the Plating is polite, the direction of a Kick pedal uses for a long time.
Since the stick which puts the guide peg of
, however a KICK is short, it is a stake a little at Keri.
View detail
Fits: HONDA LEAD 50, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOSR, HONDA DIO CHESTA
It was used for the overhaul of Diozx on the waist. Since the gasket of the muffler is also contained, it is recommended.
It was used for the overhaul of Diozx on the waist.
Since the gasket of the muffler is also contained, it is recommended.
View detail
Fits: HONDA CABINA 90, HONDA JOKER90, HONDA BROAD 90, HONDA LEAD 90, HONDA LEAD 90
The cylinder of a standard is purchased to a restore. The bali of the port was violently uncanny as it had become the center of attention in a net. KITCHI livery picking and chamfering were carried out, and it finished setting up, and ran about 50
The cylinder of a standard is purchased to a restore.
The bali of the port was violently uncanny as it had become the center of attention in a net.
KITCHI livery picking and chamfering were carried out, and it finished setting up, and ran about 50 km by the shake down.
Fault in particular is not felt.
View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA Remote control jog, YAMAHA BWS125 (Bewith), YAMAHA Grand Axis, YAMAHA Apprio, YAMAHA Axis 90, YAMAHA SMAX, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA vino, YAMAHA Super Jog Z, YAMAHA Jog ZII, YAMAHA BWS100 (Bewith), YAMAHA Jog 90, YAMAHA Grand Axis, YAMAHA Apprio, YAMAHA Axis 90
Since normal was too uncool, it changed into this. Since it had equipped with the bar end of the same color, it became a dress-up [ up ] comfortable [ up ]. Although it is simple and becomes empty ....
Since normal was too uncool, it changed into this.
Since it had equipped with the bar end of the same color, it became a dress-up [ up ] comfortable [ up ].
Although it is simple and becomes empty ....
View detail