Reviews
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI D-TRACKER, KAWASAKI D-TRACKERX, KAWASAKI KLX250
normally
Rubber packing is also available in Quantity:Set helped me a lot, and if it's pleasantly cheap, Cost is also ??5 View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125S
Used on Gixxer150 (NG4BG type), no problems
Used for Gixxer 150 (NG4BG type).
All the necessary parts for the Oil Filter are included, and all you need is a tool to complete the job. (Also comes with a Drain Washer)
View detail
Fits: HONDA Grom (MSX125), HONDA APE, HONDA DREAM50, HONDA MONKEY, HONDA GORILLA
Compatible with KITACO clutch covers.
It has been about 6 months since I replaced the clutch cover with a KITACO clutch cover. After two oil changes during that time, the oil filter was finally replaced.
The work itself is easy, but it is good to protect the filter with dustcloth or something similar because the oil drips quite a bit when the filter is removed.
The removed Filter was quite dirty.
I wish I had replaced it a little earlier.
So, we will continue to confirm Repeat in the future.
View detail
Fits: HONDA HRC Grom (GROM5), HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB
Stable and easy to use.
I use it every time I change Oil.
Filter, Packing, etc. is Quantity.:It's a Set.
You won't get lost.
The price is also good.
View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
Let's make this area cheaper outside the company Part2
This is a component that must be replaced when replacing the Oil Filter!
We have prepared inexpensive Other Brand Products because we are only a Gasket.
Comparable No Color compared to OEM and almost the same look and feel
The Torque for tightening the filter cover is 10 Nm and is properly tightened using a Torque wrench.
After the replacement, I test drove the car for about 100 km without any oil leakage and no problem.
View detail
Fits: KAWASAKI Z125-PRO BR125H, KAWASAKI KLX125 LX125C All models, KAWASAKI D Tracker 125 LX125D
Easy preparation for Oil Filter replacement
The replacement work is convenient because there is no need to ask for individual parts at the motorcycle shop, and no specialized knowledge is required for the replacement work.
Not sure about the cost per unit of each component, so not sure about the cosmetics.
View detail
Fits: YAMAHA tricker, YAMAHA tricker, YAMAHA Cerro 250, YAMAHA XT250X, YAMAHA Cerro 250
SEROW Oil Filter
Quantity of GasketFilter required for oil change:The set comes in a single package. It is surprising that even the FillerBottle Gasket is included. View detail
Fits: HONDA HRC Grom (GROM5), HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB
Specifically designed oil filter kit for your JC92 Grom
About quality and texture, I can confirm that the quality is great and that the materials used is cotton gauze for the filter material, aluminum for the drain washer and NBR (nitrile butadiene rubber) for the O-rings. About the feeling of use, Specifically designed oil filter kit for your JC92 Grom works out perfect for an oil and filter service on the new Honda clutch cover. Products to buy together, A higher flow and cleanable air filter panel to fit to the original airbox would be ideal to also add to your cart to maximise performance from the original airbox and minimise the cost of replacement air filter elements in the future.. Difficulty of installation, I can say the fitment of the oil filter kit for my installation was easy due to the ease of access and simple nature of securing the oil filter directly to the new styled clutch cover from Honda. Cost performance and comparison with other products, The pricing of this product is great, cheaper then other oil filter kits for the JC92 Grom that are available. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: KAWASAKI Z125-PRO BR125H, KAWASAKI KLX125 LX125C All models, KAWASAKI D Tracker 125 LX125D
It was a full set, including packing around the oil.
[How is it used?
Filter replaced in conjunction with Oil replacement
How was your experience with it?
Quantity of Oil Filter, Packing of Filter, DrainWasher and Packing of Filler cap:It is installed in the same way as SetOEM Product.
However, the DrainWasher was replaced with a YOSHIMURA oil temperature sensor, and the filler cap packing was not used this time because it did not need to be replaced after checking.
How did it compare to other products?
If you only need Filter and Filter Packing, there are other products that are cheaper.
[Points to note]
I don't think there is anything special about it. I will check the durability from now on.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
Oil change
Element replacement along with Oil replacement. View detail
Repair oil seal of the same size as the genuine part
About quality and texture, I can confirm that the quality is great and that the material used is NBR (nitrile butadiene rubber) which is a synthetic rubber resistant to fuel and oil. About the feeling of use, This repair oil seal is of the same size as the genuine part, fits as intended and zero oil leaks as designed. Products to buy together, To lessen the likelihood of oil leaks in the future from excessive flex in the gear shifter spindle it would be ideal to add a spindle holder to your cart to support the gear shifter spindle. Difficulty of installation, I can say the fitment of the oil seal for my installation was average due to the removal of the gear shifter to allow for removal of the original Honda parts to be discarded . Cost performance and comparison with other products, The pricing of the product is great. You receive a oil seal made from a quality material that is durable for it's environment and the best value available when compared to others. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Serves the same purpose as the original gasket
About quality and texture, I can confirm that the quality is great and that the material used is a paper gasket sheet that is stamped out to replicate the original paper gasket. About the feeling of use, Serves the same purpose as the original gasket, no noticeable difference.Seals well with no oil leaks present. Products to buy together, The engine cover is now removed quite frequently to check the condition of the cam chain tensioner system due to the higher revving 4 valve head setup so it would be ideal to add a tensioner cap and wheels to your cart for when needed. Difficulty of installation, I can say the fitment of the left crankcase cover gasket for my installation is was very easy due to the ease of access to the bolts and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a gasket made from the same material as the original gasket and priced cheaper then the original gasket and what other brands offer. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA Super Cub 50, HONDA cross-cub 110, HONDA Cross Cub 50, HONDA Super Cub 110-Pro, HONDA Super Cub 50-Pro, HONDA Super Cub 110
First time replacing Oil Filter of CUB110.
I purchased this product to replace the Oil Filter on my CUB110.
I removed the oil filter after draining and replacing the oil, but I did it deep in the mountains because the oil leaks a little and doing it in a concrete area such as a park might cause some embarrassment.
Surprisingly, the rest was easier than replacing the oil and the Oil Filter is working well.
View detail
Fits: HONDA CBR250R, HONDA CBR250F, HONDA CRF250L, HONDA CRF250M, HONDA CB250R, HONDA CB250F, HONDA CRF250L, HONDA CRF250M, HONDA CRF250 Rally, HONDA CRF250 Rally LD, HONDA Rebel 250
Quantity:It is easy to order because it is a Set.
It is easy because I don't have to find and order each part number for Filter, Gasket, Washer, and O-Ring.
The effectiveness of the filter may be reduced because it has fewer folds than the OEM, i.e., it has a smaller area, but it should be replaced more frequently.
View detail
Dream oil filter
The oil filter is essential part for servicing your bike. As our bike getting older regular filter change can maintain bike in the top condition. I got one to keep it as a spare for next time View detail
Fits: HONDA GB350, HONDA SUPER CUB 50, HONDA NT1100, HONDA CRF1000LAfrica Twin, HONDA CROSSCUB110, HONDA X-ADV, HONDA NC750X DCT, HONDA CRF1100LAfrica Twin, HONDA NC750S DCT, HONDA SUPER CUB110, HONDA GOLD WING, HONDA glom, HONDA CROSS CUB50, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB110-PRO, HONDA REBEL1100, HONDA DAX125, HONDA MONKEY125
Select by price
OEM Product is 804 yen This product (KITACO) is 654 yen, 150 yen cheaper I ordered both and compared them.
I'm talking about a different type of car, but the size of the Other Brand ProductFilter is slightly smaller than the Smaller Product Shop. Oil pressure could escape from there, so use OEM Product." I had been told that this product was a good idea, so I measured Size to see if it was a good idea.
The size (appearance) does not differ from the OEM Product (36mm). However, the inside ring position is 10.2mm for the OEM Product instead of the rubber packing.
This product had a difference of 15.4mm.
Not sure how this difference would change performance-wise. Probably not such a difference.
If the price difference was a little larger, I would use this product, but if it's only once or twice a year, I'd probably use the OEM Product.
It's a matter of judgment. If you choose by price, this is the obvious choice.
View detail
Fits: YAMAHA TW200 E 4CS All models, YAMAHA TW200 E 5LB All models, YAMAHA SEROW225 4JG, YAMAHA BRONCO 5BT, YAMAHA SEROW225 5MP, YAMAHA TW225E 5VC All models, YAMAHA TW200 E 2JL All models, YAMAHA TW200 5LB All models, YAMAHA TW200 4CS All models, YAMAHA TW200 2JL All models, YAMAHA SEROW225
It was the right choice.
I was originally going to replace the oil with OEM parts, but as a beginner, I didn't know which to get, and the part numbers were a bit fuzzy.:I decided to go with the set. I was very happy to find that all the missing oil seals were also included in the set. It was convenient and Reasonable. View detail
Fits: HONDA CRF250L, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999, HONDA CBR250 R (MC41) FNo:MC41-1400001-, HONDA CBR250 R (MC41) FNo:MC41-1200001-, HONDA CBR250 R (MC41) FNo: MC41-1000001-1099999
Used when changing engine oil in CRF250L MD44
It can be installed on a CRF250L MD44 without any problem. The same parts are available from several companies. View detail
For KITACOClutch cover
[How is it used?
For XR100MOTARDKITACOClutch cover
Was the one you received as per Image?
Yes
How was your experience with it?
neither good nor bad
[Points to note]
None
How did it compare to other products?
It is the same as the Honda OEM DREAM 50 but cheaper.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI SV650 S VP52A All models, SUZUKI SV650 VP52A All models, SUZUKI GSX1100F All models, SUZUKI GSX-S1000 GT79A All models, SUZUKI GSX-S1000 F GT79A All models, SUZUKI BANDIT1200 S GV77A, SUZUKI INTRUDER400 VK51A All models, SUZUKI INTRUDER1500LC VY51A All models, SUZUKI INAZUMA400, SUZUKI INAZUMA1200 GV76A, SUZUKI All VX800 models, SUZUKI GLADIUS650400 VK58A, SUZUKI DESPELADO400 VK52A All models, SUZUKI SV400 VK53A All models, SUZUKI GSF1200 GV75A All models, SUZUKI GS1200SS GV78A All models, SUZUKI GSF1200 S GV75A All models
Along with Oil replacement.
I think the price and quality is good, it's essential for regular maintenance. View detail