Reviews
Fits: HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1
Made by POSH for peace of mind
Seals have been replaced due to engine overhaul. We will be assembling it from now on. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Ape 50, HONDA XR50 Motard, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Ape 50, HONDA XR50 Motard
6VMONKEY Maintenance Shift Arm Part Oil Seal
6VMONKEY Oil leakage from the oil seal of the change shift pedal gradually became a concern, so we replaced it.
The procedure is
(1) Apply a slotted screwdriver to the outer circumference of the oil seal currently installed and tap it to the center. (This work is important in case of sticking)
Screw the screw into the oil seal installed.
(3) Slowly pull out the Screw with pliers.
The oil seal of ShiftChange Pedal is thicker than other oil seals, so if the above method is also difficult, tear off the rubber around the shaft and pull out the gold part of the oil seal with radio pliers!
insertion
I used PVC pipe over a moderate flat washer.
View detail
Used as a grapple when making your own Torque rod
Not high intensity or anything, just Material.:Stainless SteelM8Stud bolt.
Originally Stud bolt for SR400/500 Exhaust System, these parts are designed to replace the Rust-friendly OEM Stud.
I used it as a joint for making my own Torque rod for Brake, not for its original purpose, so I don't have an impression of it as an Exhaust SystemStud.
Since it will be used on a part that is exposed to high temperatures from the exhaust (which is why the OEM steel stud bolt will rust quickly and violently), I feel that stainless steel will seize and be difficult to remove next time.
After aligning the screw threads by putting a tap through the screw hole on the cylinder side, apply heat-resistant grease (thread compound) or the like before assembly, or you will likely face hell later on.
Even with a normal exhaust system replacement, the nut that holds the exhaust pipe flange is likely to burn out easily, so the use of a thread compound is probably a must.
What makes this Stud bolt different from other very inexpensive UniversalStuds is that the end of the Screw can be hung with a hexagonal wrench!
Stud bolts are usually attached and removed with a double nut that requires a bit of hang, or with a StudWrench, a special tool.
Material:I'm not sure about using it as an Exhaust SystemStud when it is Stainless Steel, but it would be good for those who cannot tolerate Rust.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
To MONKEY's Overhaul.
I bought this for overhaul of my MONKEY. I had a hard time deciding, but I decided to go with this one because of the price. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
For Monkey engine maintenance
I used it for servicing my MONKEY and it is a must have for Engine Overhaul. View detail
YZF-R1 is M14
I bought a Washer for M14 for my YZF-R1 (2018). Some people use it 3 times, but I am afraid so I replace it every time.
It is not very profitable to pay shipping charges and hundreds of yen for one order, so it is more economical to buy these kinds of items in bulk, about 5-10 pieces at a time.
View detail
Fits: HONDA GROM125, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I made a mistake.
It doesn't seem to fit jc92.
The diameter was totally different.
With 10,000 kilometers on it, it wasn't that worn.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Replace while opening Engine
Quantity like this:When it comes to Sets, there are some things that are not necessary, but this Quantity:Set is just what I need, so that helps. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Replace during overhaul of Monkey engine
I replaced it at the time of overhaul of the Monkey engine. Since it is a consumable part, I thought it would be safer to replace it at the engine opening timing, so I replaced it. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It can be used for CD90!
[How is it used?
The shape changed and hardened over time, leading to the purchase of a new one.
How was your experience with it?
Elasticity returns and Oil does not drip.
You can operate the system without worrying about leakage.
How did it compare to other products?
OEM Parts is slightly cheaper, but I was in a hurry.
That said, the price difference is within the margin of error, so you should purchase according to Timing such as Sale.
[Points to note]
Material when exposed outdoors for years.:Deterioration is inevitable because of Rubber products.
Recommendation for periodic replacement.
O-rings, which are not oil-resistant, are sold at home centers as water supply packing, but dedicated products are safer and more secure.
View detail
Oil seals like oem
I buyed these seals for a rebuild and they are like oem nice quality i hope they will last like oem quality. No oil leaks at the moment I am happy View detail
Cap bolt gives it a Custom feel.
[How is it used?
The Normal bolt was a little rusty and I purchased this to replace it.
Was the one you received as per Image?
Material:It is Stainless Steel and has the same quality as the Image.
Was the installation difficult?
As long as the specified Torque is adhered to, replacement is easy.
How was your experience with it?
Disassembly of the engine is now easier. Also, it seems less likely to deteriorate over time and looks more Parenthesis.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
No. Material:Stainless Steel allows maintenance without worrying about rust in the future.
▼KITACO's Bolt with Flange may have been better because it was easier to tighten the Torque evenly.
View detail
Quality comparable to OEM parts
I'd estimate OEM Parts with Parts catalog in hand,
The price had been raised considerably from the price at that time, and I was hesitant,
I remembered that it is also sold by POSH, and when I looked at the price
Quite cheap ??
The quality of the product we received was comparable to OEM.
I will Repeat next time.
View detail
Repair Oil Seals for Front Sprocket Shaft and Shift Shaft on the Grom
About quality and texture: I am happy with the quality of the oil seals from CF Posh, the outer diameter of the oil seals are a hard plastic to press into the crankshaft case while the inner diameter of the oil seals are a soft rubber to form an oil tight seal against the metal shafts. About the feeling of use: The crankshaft cases had been opened for internal upgrades and I thought it would be wise to also renew these oil seals to remove the chance of oil leaks from these two points soon after the rebuild, no oil leaks to date. Products to buy together: The crankcase cover gasket set from CF Posh would also be desirable to purchase along side these oil seals as these gaskets do need replacing during routine maintenance. Difficulty of installation: The process to install takes about 45 minutes, remove the front sprocket cover and front sprocket and then pry out the old oil seal. Position the new oil seal and press it into the case. Same process for the shift shaft but you need to remove the shift linkage for access. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality set of oil seals from CF Posh and it was in stock ready to ship unlike the individual Honda oil seals but the pricing from Thai Honda motorcycle parts is cheaper. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I have purchased a few items from CF Posh now and am happy to recommend them as their quality is excellent and their pricing is competitive. View detail
Fits: HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard
Quantity:1 Set of 3pcs.
When changing the oil, we found oil leaking from the kick shaft, so we also changed the three oil seals on the shift shaft and drive shaft at the same time. This product is Quantity:I like it because I don't have to worry about buying them separately since they are 1 set of 3pcs. View detail
Fits: HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 100, HONDA XR100 Motard
Exchange Timing can also be combined and GOOD
Purchased to repair oil leak from seal on APE 100 KICK
Oil seal is Material:Since it is Rubber, if one part goes bad, Large body other parts will also go bad, so this Quantity that Shift, Sprocket's Seal are together.:Set is useful.
There are many ways to pull out a Seal, but a pick tool that can be hooked from the outside is very fast.
The product itself is no different from the OEM, so there is no problem.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Sealing ring
"Purchased for HONDA SUPER CUB 50 CUSTOM.
Part number: 270818.
This is an o-ring - DO NOT confuse, this is not the original dcup, it is just an o-ring. Good quality. -------------------------------------------------- -------- Acquired for Honda Super Cub 50 Custom. Article of the details: 270818. This is a sealing ring - do not confuse, this is not an original Tsup, it is just a sealing ring. good quality. Powered by Google Translator"
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub]., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub].
A little short.
Material is fine, about the same length as OEM. It may depend on the Flange of the Exhaust System used, but in my case it was a little short. View detail
Front Tappet Cover for Dress-up!
[How is it used?
I bought it for dress-up purposes because the NORMAL Tappet cap is tasteless.
Was the one you received as per Image?
Material:It is aluminum and lightweight, but it is more massive than NORMAL and more luxurious than Image.
Was the installation difficult?
Simply remove and replace the NORMAL Tappet cap.
Material:Since it is Aluminum, it is better to manage Torque in one way or another.
How was your experience with it?
I replaced only the cap on the lower side of the engine because the upper cap of the engine was taken out with Breather Hose 650mm 6mm Diameter.
[Included Parts:were they on?
There is no other.
[Was there anything that disappointed you?
Material when put on and taken off many times.:Since it is aluminum, Wound and paint baldness is a concern.
I chose Red to match with YOSHIMURA's carburetor, but honestly, I thought I should have chosen Silver instead of Red.
Although it is not expected to dramatically improve performance, it can be used as a FloatFloat by casually dress-up your favorite color when you ride.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Quantity:I'm glad it's 1 Set of 2pcs.
Quantity:2pc. I know that many people do not need a Set either, but it is pleasant to have a spare.
It helps that I know many people who drive Horizontal TypeEngine.
View detail