Reviews
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
H.Craft Oil Pump ShaftOil seal 10×16×5
Used for oil pump of AF34 LIVE DIO.
Seal was replaced because the OEMOil pump was discontinued.
I am grateful to Large Change for providing these parts.
View detail
Fits: HONDA CRM250, HONDA NSR250, HONDA GYRO, HONDA MOTOCOMPO, HONDA LEAD 90, HONDA LEAD 50
Thank you for your prompt response!
The oil seal on the MOTOCOMPO oil pump fell off and 2 cycles of oil leaked into the crank.
I noticed this malfunction and purchased the product for repair and thank you for your prompt response. The repair was completed successfully and I was able to restore it.
View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
Parts cost is cheap, so let's change it.
Since the vehicle is old, we changed the oil pump seal and other parts while performing OH on each part of the vehicle.
It is not available from Manufacturer only in this part here, but you can buy it only in this Seal.
Worst case scenario, the Engine breaks, so changing a part that costs a few hundred yen makes a difference in my mood!
If you haven't done Engine in a while, you should change the vehicle with the White Smoke Moke Moke.
It is not a difficult task if you can bleed air from the oil pump.
Rakuten's webike has a high shipping cost, so if you plan to buy this much, buy it from here! (Lol)
View detail
Fits: KAWASAKI KH500, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI 750SS MACHIV (H2), KAWASAKI 500SS MACHIII (H1), KAWASAKI 400SS MACHII (S3), KAWASAKI 350SS MACHII (S2), KAWASAKI 250SS MACHI (S1)
Great!
Used for Oil pumpOH of Egli MACH *VRing needs to be prepared separately. View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
HCraft Oil Pump ShaftOil seal
I used to use 2ST DIO AF27
It's working fine.
View detail
Fits: HONDA CRM250, HONDA NSR250, HONDA GYRO, HONDA MOTOCOMPO, HONDA LEAD 90, HONDA LEAD 50
For the oil pump of PALADIN
Bought this for my Honda PALADIN Oil Pump Shaft.
ManufacturerOEM had been discontinued, so I was looking for the same Size.
I'm glad you found the Exactly Size.
View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
Used for Gyro up
It is being used as an Oil pumpSeal for Honda GyroUp!
This is helpful because there are no settings in OEM Parts
Now I'm wondering how durable it will be.
View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
For LIVE DIOZX
When I received the first one that was sent to me that was different from the size listed, I noticed it when I tried to assemble it with Rose.
When I contacted We-Big, they responded immediately and this time I was able to assemble it successfully.
I had the work done at the motorcycle shop and removed the Seat and the box under the Seat and the intake system to the intake manifold, which looked surprisingly easy.
After Rose, I found out the difference in size, so I had to pay twice for the labor, but …
I got an email asking me to write an impresario, so I'm writing
It's a warranty of conformity, but it didn't give me any Points.
View detail
Fits: HONDA gyro canopy, HONDA GYRO, HONDA DIO, HONDA LEAD 100, HONDA GYROX
Cospar good
I heard that the leak from the oil pump should be replaced with this product. The repair cost is too different. View detail
Fits: HONDA CRM250, HONDA NSR250, HONDA GYRO, HONDA MOTOCOMPO, HONDA LEAD 90, HONDA LEAD 50
SEA BASS LT80 Oil Pump
I purchased the SEA BASS ATV LT80 Oil pump Seal I'm going to have to replace it with a Pumpassy and the parts will cost about $12,000 for the Pump Seal I've been using it for a while now I am satisfied with the Large at less than ¥1000 including shipping It is hard to say about the durability of this product because it is still to come, but it is probably Large Thank you very much View detail
Early exchange
If the top of the Left Side Exhaust Chamber is dirty with Oil, the cause is almost deterioration of this part.
Because there is no single part setting in Manufacturer, I had a hard time repairing so far, but this is safe with this.
(If you can not replace this, Seal's degradation on the Engine side on this. )
Since replacement work involves attaching and detaching Oil pump, let's pay attention to insufficient Oil supply at restart = seizure.
View detail
Fits: KAWASAKI KH500, KAWASAKI KH400, KAWASAKI KH250, KAWASAKI 750SS MACHIV (H2), KAWASAKI 500SS MACHIII (H1), KAWASAKI 400SS MACHII (S3), KAWASAKI 350SS MACHII (S2), KAWASAKI 250SS MACHI (S1)
OEM Parts Number
I think that OEM Parts Number is out of print and there is no room for selection.
Because waste parts are also Set, is this price ari?
I am confident in incorporating, there is no initial leak of Oil.
I expect the durability of the product afterwards.
View detail
Fits: HONDA CRM250, HONDA NSR250, HONDA GYRO, HONDA MOTOCOMPO, HONDA LEAD 90, HONDA LEAD 50
Extremely helpful.
Since OEM does not set service parts, it is supposed to be an Oil pump ASSY exchange, so Yukichi can fly away with hundreds of yen.
Although I was deeply moved when I purchased it with Yahoo auction earlier, this is thanks because the price is Reasonable further. The OEM seal of OEM is somewhat Spec. Although it is different, Oil leakage to Gearcase seems to stop for now and it is cheap, so it may be changed regularly.
I really want to appreciate these parts.
View detail