Reviews
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA NC750S DualClutchTransmission, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB650R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR600F
GSX1100S Since it is the diameter 30 of a screw, it cannot be equipped with this product. I had returned goods and exchange carried out. Or [ requiring management, such as changing to a rubber ring thicker since oil blows off, although it is a dre
GSX1100S Since it is the diameter 30 of a screw, it cannot be equipped with this product.
I had returned goods and exchange carried out.
Or [ requiring management, such as changing to a rubber ring thicker since oil blows off, although it is a dress-up up and the rubber ring is attached about wearing ].
View detail
Fits: YAMAHA BWS100 (Bewith)
The water-cooled cylinder of KN plan is constructed by the [Webike-monitor] grand axis. Although this product is a gasket of the prevention from a leak, you have to bind a head tight so strongly that this gasket crushes and changes in the case of atta
The water-cooled cylinder of KN plan is constructed by the [Webike-monitor] grand axis.
Although this product is a gasket of the prevention from a leak, you have to bind a head tight so strongly that this gasket crushes and changes in the case of attachment.
Otherwise, an inside gasket cannot bear the explosion in an engine, but a coolant flows in in a cylinder and a piston.
Therefore, we recommend you to exchange for whenever [ of reconstructing once a year or a piston ].
That is a regrettable point although it is unavoidable one on a configuration.
View detail
Fits: HONDA monkey, HONDA CB400 Fore (air-cooled), HONDA monkey, HONDA CB400 Fore (air-cooled)
It is far, and although what is necessary is just to see, it is dramatically regrettable, if it approaches since structure is coarse. although only a few was repaired by itself -- mind -- since it was all likely to try to correct a place, or it was li
It is far, and although what is necessary is just to see, it is dramatically regrettable, if it approaches since structure is coarse.
although only a few was repaired by itself -- mind -- since it was all likely to try to correct a place, or it was likely to become and time was likely to be taken, it gave up.
View detail
It is only one piece, although seemingly it is a three-piece set if an article image is seen. The direction which bought the thing of K factory regards those who need a number as the ability to become fortunate. That seems to be a two-piece set.
It is only one piece, although seemingly it is a three-piece set if an article image is seen.
The direction which bought the thing of K factory regards those who need a number as the ability to become fortunate.
That seems to be a two-piece set.
Since three pieces were required, it is shocking, but the one selected only by the picture is only foolish.
View detail
it is aluminum shaving, and comes out and there is a high grade feeling -- dramatically -- cool -- but -- heavily -- it is heavy . This cover of AGRAS is 103g (actual measurement which contained the bolt altogether) to the pure cover 80g and the Mukaw
it is aluminum shaving, and comes out and there is a high grade feeling -- dramatically -- cool -- but -- heavily -- it is heavy .
This cover of AGRAS is 103g (actual measurement which contained the bolt altogether) to the pure cover 80g and the Mukawa cover 46g.
Since it was a high thing, I wanted you to carry out weight just like pure at least, although it is not such parts how.
View detail
Fits: KAWASAKI NINJA600R C1-10, KAWASAKI Z750GP, KAWASAKI Z1000R, KAWASAKI 1000GTR, KAWASAKI EN400, KAWASAKI Eliminator 400, KAWASAKI Z750FXII/III, KAWASAKI Z750FXII/III, KAWASAKI Z400LTD, HONDA GL1200 Gold Wing, HONDA CBX1000, HONDA CB900F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F
This is the first time that it equipped with the oil filter with a magnet. When it took out in order to use about 6000 km and to exchange, the metal cover below an oil filter had separated as the picture. I think this quality and how it is. Ad
This is the first time that it equipped with the oil filter with a magnet.
When it took out in order to use about 6000 km and to exchange, the metal cover below an oil filter had separated as the picture.
I think this quality and how it is.
Adhesion of iron powder was not able to be checked with a magnet.
The effect of the magnet could not be checked, either but it was unsatisfactory.
View detail
Fits: DUCATI MONSTER 821 STRIPE 821 - All, DUCATI MONSTER 821 STRIPE 821 - All, DUCATI MONSTER 821 STRIPE 821 - All, DUCATI MONSTER 821 821 - All, DUCATI MONSTER 821 DARK 821 - All, DUCATI MONSTER 821 DARK 821 - All, DUCATI MONSTER 659 659 - Austraila, DUCATI MONSTER 821 821 - All, DUCATI MONSTER 821 821 - All, DUCATI MONSTER 659 659 - Austraila, DUCATI HYPERMOTARD SP 821 - All, DUCATI HYPERMOTARD SP 821 - All, DUCATI HYPERMOTARD SP 821 - All, DUCATI 800SS 803 - All, DUCATI HYPERMOTARD 939 SP 937 - All, DUCATI HYPERMOTARD 939 SP 937 - All, DUCATI 800SS 803 - All, DUCATI 800SS 800 - All, DUCATI 800SS 800 - All, DUCATI 800SS 800 - All
Pains were taken to remove when exchanging although I thought that especially the differences of the engine performance were parts which cannot be felt. Although a 17-mm hexagon-head head was welded to the top-most vertices of the filter, and form fas
Pains were taken to remove when exchanging although I thought that especially the differences of the engine performance were parts which cannot be felt.
Although a 17-mm hexagon-head head was welded to the top-most vertices of the filter, and form fastened with specification torque indulgently apparently since it was a press cast although it seems to be convenient, the head has been licked when loosening.
(By the reason for having carried out the cheap article tool, it is never), of course, a filter wrench cannot be used, either.
A cross section is round, and also since the filter of a ducati is in the location which was hidden in the crankcase, it cannot use a band wrench, either.
After all, the driver was able to be stabbed and loosened on the main part by the last means.
Although it does not think that all become this appearance, I think that I will next buy an original manufacturer's product since he learned a lesson from this.
View detail
Although the standard radiator reserve tank of KLX is attached to back left-hand side SHIERAUDO, the center of gravity is used in order to bring to the engine forward left, since he would like to bring to a center. Although neither a size nor a form i
Although the standard radiator reserve tank of KLX is attached to back left-hand side SHIERAUDO, the center of gravity is used in order to bring to the engine forward left, since he would like to bring to a center.
Although neither a size nor a form is bad, it is a place where it is not quite satisfactory that the rubber of a cap deteriorates immediately and breaks.
View detail
Fits: HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400R, HONDA CB1100, HONDA CBR1000RR-RFIREBLADE SP, HONDA CBR1000RR, HONDA CBR1000RR-RFIREBLADE, HONDA CBR1000RR, HONDA CBR1000RR, HONDA HORNET900, HONDA CB900F, HONDA CB650R, HONDA CB650F, HONDA Rebel1100 DCT, HONDA NM-4, HONDA Rebel1100, HONDA NT1100
Although filters were exchanged simultaneously with an oil change today, Pains were taken to remove [ although the filter authentic positive in a manufacturer it became impossible for a wrench to blow in a filter has a little margins when inserting in
Although filters were exchanged simultaneously with an oil change today,
Pains were taken to remove [ although the filter authentic positive in a manufacturer it became impossible for a wrench to blow in a filter has a little margins when inserting in a wrench, it is tight, and ] in case of daytonas, to it when the filter made from a daytona was removed by the filter wrench made from a daytona.
Since it was a filter old by chance, it was good, but only a pure filter is used after this.
View detail
Fits: HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA NSF100, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50
It attached together with the oil shower head of the company. Since the nipple of an 8-mm hose is high at M10, I think with a hose that this price is cheap. However, the die length of a hose is lacking even to the oil catch tank which I have attac
It attached together with the oil shower head of the company.
Since the nipple of an 8-mm hose is high at M10, I think with a hose that this price is cheap.
However, the die length of a hose is lacking even to the oil catch tank which I have attached, and I will consider it as this evaluation.
Moreover, I would like you to use a 6-mm hose by M8 safely.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA XR100 Motard, HONDA XR50 Motard
It purchased, as a result of worrying about how to miss a blowby, since the carburetor was changed. If pressure is missed from an oil filler neck, I will think that this may be sufficient, but since the hose is directly taken out from the crankcase, I
It purchased, as a result of worrying about how to miss a blowby, since the carburetor was changed.
If pressure is missed from an oil filler neck, I will think that this may be sufficient, but since the hose is directly taken out from the crankcase, I think the kana which should just have looked for components in the home center etc.
Now, 3000 yen is high.
Excuse me, it is a two stars.
View detail
It was used for 94 models of SR400. Since the pure piston was almost coming at exchange time, he thought that he would carry out bore up drastically, and it exchanged by Schopp, but the piston has broken at about 4000 km after exchange. The cause
It was used for 94 models of SR400.
Since the pure piston was almost coming at exchange time, he thought that he would carry out bore up drastically, and it exchanged by Schopp, but the piston has broken at about 4000 km after exchange.
The cause was because not having equipped with the external muffler and the oil cooler and a carburetor rearranged normal.
After bore up became that it is easy to ride since torque up was carried out substantially and the maximum high speed was also raised.
It is better to be purchased by Kami who considered it, since an external muffler, an oil cooler, and big carburetor Lother are required when carrying out bore up.
since the attachment by Schopp was incidentally 23000 yen only at wages -- by reference -- pleasing .
View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500
By an appearance cinch, he thought that he was smart and it purchased. Since the product and a dial face had shifted, the time and effort corrected with snap ring pliers was taken, but it was smartly pleasing. The plastic of why or a meter part cr
By an appearance cinch, he thought that he was smart and it purchased.
Since the product and a dial face had shifted, the time and effort corrected with snap ring pliers was taken, but it was smartly pleasing.
The plastic of why or a meter part cracked --, however one day over which several weeks passed.
An oil temperature goes up too much? Although an artificial ? cause is still unknown, I was allowed to consider it as the evaluation here.
It is regrettable, although it was five star when there was even no crack.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
It attached to the monkey. It used for two years, the lens became dirty, and it became hard to see.
It attached to the monkey.
It used for two years, the lens became dirty, and it became hard to see.
View detail