Reviews
Fits: HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR400R, HONDA CB1100, HONDA CBR1000RR-RFIREBLADE SP, HONDA CBR1000RR, HONDA CBR1000RR-RFIREBLADE, HONDA CBR1000RR, HONDA CBR1000RR, HONDA HORNET900, HONDA CB900F, HONDA CB650R, HONDA CB650F, HONDA Rebel1100 DCT, HONDA NM-4, HONDA Rebel1100, HONDA NT1100
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail
SS Standard Custom
I ordered it from a certain Large Hand Mail Order Site and it came the next day and I installed it.
The Side cowl needs to be removed, but the Cover fits snugly, so there is no Stress. The appearance is plain compared to the OEM Magnesium cover, but the texture seems to protect it in case it falls over, so I have no complaints.
But 40,000+ is too expensive.
View detail
More than Bore up.
Swapped from SUPER CUB 50 OEMEngine
With Engine itself pon
The carburetor came with a 16π? The carburetor came with a 16&pi carburetor, but I used a pc20 funnel and a YOSHIMURA intake manifold. The rest is KITACO clutch wire and clutch lever.
FSprocket exchanged R for 15, or was it 38?
I'm not sure about Included Parts:as you don't mention it specifically,
I tried to use the Indicator and found that there are two in the box, one for the carburetor side and the other for what? I tried to use the Indicator and found two in the box, one for the carburetor side and one for what? Well, I don't need it because CUBOEM13π is obviously not enough for 86cc lol.
The original engine oil was replaced with G2Oil after warming up and breaking in salad oil.
I don't know about the attached carburetor, but after breaking in, full throttle, well, thanks to the pc20, the CUB is no longer a CUB. 60kmMeter is swept away in about 5 seconds.
Another AA01 centrifugal 3 speed 88ccHigh Camshaft18πcarburetorOthersSprocket uses the same size, well, Gold amount is more expensive to bore up, so it is still recommended for those who want Manual clutch.
Installation can be easily done by one person.
The difficult part would be to modify the terminals to match the Engine side when using OEMHarness.
I think it would be more of a hassle to replace even the Harness.
As you may have read in other sites or on our side, the first time GEAR enters the market, it is very reluctant to do so.
Neutral goes in for me, but I often have trouble returning to 1st gear from 2nd gear.
The wiring diagram in the Instruction Manual was Harnessfor MONKEY, but the color was the same in CUB.
I don't know how durable it is since it is currently just loaded, but I hope it was a hit.
View detail
It's good to have a sense of unity.
It would be good if it is attached with BezelRing at the same time, so that it can be unified with Black. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
To prevent oil leakage from EngineTop
There is a constant oil leak from the EngineTOP of Initial Model Zephyr 750!
Oil leakageConstantly covered with oil from the Cylinder het, at first, Quantity:Pair (for Left and Right) I was told that there was a leakage from the moon-shaped rubber packing of the "Zephyr" and I additionally plugged it with liquid packing, but it had no effect.
advantage
No more oil leaks.
Can be pontooned.
The cause of oil leakage can be identified.
Disadvantage
The bolt is replaced only by screwing it in a little tighter, but forcing it in deforms the bolt head.
If possible, it is recommended to replace the Gasket and CamshaftPlug, so please consult with Wallet.
When replacing all the parts, the Tank/Quantity:Pair (for Left and Right) Without removing the Coil Horn, the Bolt cannot be removed from the front and back of the Engine Top Cover due to the lack of clearance.
If there is oil leakage from other locations than the bolt, other countermeasures should be taken.
Gasket1pc. of Head/Quantity:Pair (for Left and Right) Moon shaped CamshaftPlug1.35×13.5 4 pieces required
When the Gasket/CamshaftPlug is replaced, use the original Bolt and make sure that the Bolt is penetrating to the bottom, otherwise this product may be inserted only halfway.
View detail
Fits: SUZUKI Gixxer SF250, SUZUKI V-Strom1000, SUZUKI GSX-S750, SUZUKI GSX-S150, SUZUKI GSX-R1100, SUZUKI GSR750, SUZUKI GSX-R150, SUZUKI GSX400 IMPULSE, YAMAHA XMAX250, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER250 SF, SUZUKI GIXXER SF250, SUZUKI V-Strom250, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI SV650X, SUZUKI SV650, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS
Easy dress-up
I purchased this product to match the color of my car body. The product is made by YOSHIMURA, so there is nothing wrong with it, but the coloring of the blue anodized product is light, and I think it is closer to light blue than blue. I think the color is more like light blue than blue. The other company's blue anodized product has a darker blue color, so I don't think the color matches. View detail
Fits: YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA XSR900, YAMAHA TRACER900GT, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA TMAX530, YAMAHA NIKEN, YAMAHA MT-09, KAWASAKI Z900RS, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-25R, HONDA PCX150, HONDA CBR400R, HONDA CBR250RR, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA 400X
Difficult to install on ZX-25R, maybe body issue?
When I installed it on my ZX-25R, it became hard in the middle and could not be tightened all the way. It was floating so much that you could see it.
When I went to Home center and bought a Nut with the appropriate Pitch and tried it, I was able to tighten it to the end, so it may be a MotorcycleBody issue.
Not knowing if I could tighten it by force, I brought it to Kawasaki Plaza for regular maintenance and had it tightened. (I don't know what adjustments were made, as I didn't see them)
After that, there is no problem, especially no Oil leakage.
I'll try Wiring next time.
View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
Cost-effective dress-up
I purchased this product because I liked the simple design and more affordable pricing than other companies.
Since the mounting is hexagonal, it is difficult to tamper with by hand like the OEM, and I expect it to be somewhat tamper-proof.
The color of Gold is slightly lighter than Posh and Babyface, but once you get used to seeing it, it doesn't matter much.
The O-Ring is also included, so it can be popped in as is.
View detail
SP Takegawa SPTakegawa TAF 5-Gear Cross Mission Kit (SUPERS Bird)
TAFGEAR is indeed strong! View detail
Fits: HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50
Luxury ??
Compared to OEM Plastic, it is a blast in terms of luxury. ??
It is convenient to be able to place it upside down when it is casually pulled out.
The ease of viewing Levels in Oil is inferior to that of OEM.
I would be happy if the price were 2,000 yen lower.
View detail
Fits: HONDA CBX125F, HONDA CBX250RS, HONDA Rebel250, HONDA GB500TT, HONDA GB400TT, HONDA CRF250RALLY, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA CRF250L, HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L, HONDA CL250, HONDA CL400, HONDA CBX125Custom, HONDA CBX250S, SUZUKI 250SB, KAWASAKI SUPER SHERPA, KAWASAKI ELIMINATOR 125, KAWASAKI Z250SL
I can't physically feel it.
It is made by DAYTONA. I usually use the NORMAL version, but I bought the Super oil filter to try it out, which claims a 20% increase. Naturally, I can't feel the difference, but I can feel the difference. The price is not much different, so this one might be good too. In any case, it is a good cosmetic product. View detail
Fits: HONDA 400X, HONDA 400X, HONDA BROSProduct1, HONDA BROSProduct2, HONDA CB-1, HONDA CB-1 TYPEII, HONDA CB1000R, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000T2, HONDA CB1100, HONDA CB1100SE, HONDA CB1100EX, HONDA CB1100BLACKSTYLE, HONDA CB1100RS, HONDA CB1100E Package, HONDA CB1100RS Final Edition, HONDA CB1100EX Final Edition, HONDA CB1300 SUPER TOURING, HONDA CB1300SF
Cost performance！
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Fits: KAWASAKI ER-4n, KAWASAKI 1400GTR CONCOURS14, KAWASAKI 1400GTR, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI MEGURO K3, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R SE, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R
Easier to obtain at a lower price than OEM
[How is it used?
I used to change Filter every two Oil changes, but since Oil is changed every 3000 km or so, I feel that Filter every three times is sufficient.
How was your experience with it?
I have never had an oil leak from the filter, nor have I ever had foreign matter mixed in with the replaced oil.
There is no particular problem, or perhaps there is no product other than a defective product that has a visible problem due to the nature of its components.
How did it compare to other products?
I saw a Motorcycle Youtuber who disassembled OEM and other brand product filters of major manufacturers and compared the internal filter area, etc. He concluded that OEM is the highest quality.
Considering that the difference is less than 1000 yen, I think it is a good idea to choose OEM.
It is a subtle point when considering availability and the need for such high quality.
[Points to note]
Never tighten too tightly.
It would be disastrous if the Screw threads were broken by using a tool and tightening it hard.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150., SUZUKI Gixxer 150.
Exchange Required
Product Name
DAYTONA DAYTONA Oil change Perfect set
Item Number
30973
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
For Oil Replacement
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is not that difficult if you are familiar with it. You'll need the service manual at first.
How was your experience with it?
It's all in there, so there's nothing to worry about.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA FZ6-S Feather, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZ6-N, YAMAHA FZ1, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6, YAMAHA XJ6
Reliable OEM
The XSR900 is the first DIY replacement.
There were cheaper filters available, but we went with OEM for reliability...
Well, I guess it's a matter of mood (chuckles).
View detail
CUB to Blowby hose in!
CUB I put it on first, of the Blowby hose. The price was good and inexpensive. View detail
Fits: HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA BENRY CD50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA Benry 50S, HONDA Benry 50S, HONDA Benry 50S
While replacing MONKEY's Clutch.
I bought this while I was bore up on MONKEY and I'm looking forward to it since it looks like it has a Large capacity. View detail
During MONKEY's Bore up.
I bought it from MONKEY when it was bore up. I chose a reliable manufacturer at a reasonable price. View detail
Necessities
DrainWasher of essential items when changing oil.Quantity:1 Set of 10pcs. so each replacement costs about 73 yen. We avoid using this all the time.:Since it is aluminum, it feels good to crush it when tightened with Wrench. View detail
![[Repair parts] Valve stem seal](https://img.webike-cdn.net/catalogue/images/129133/00-01-0015_01_TS.jpg)
While replacing Valve
I will replace it with Head disassembled. it is good because Parts will be available at Rose sale. View detail