Reviews
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
To prevent oil leakage from EngineTop
There is a constant oil leak from the EngineTOP of Initial Model Zephyr 750!
Oil leakageConstantly covered with oil from the Cylinder het, at first, Quantity:Pair (for Left and Right) I was told that there was a leakage from the moon-shaped rubber packing of the "Zephyr" and I additionally plugged it with liquid packing, but it had no effect.
advantage
No more oil leaks.
Can be pontooned.
The cause of oil leakage can be identified.
Disadvantage
The bolt is replaced only by screwing it in a little tighter, but forcing it in deforms the bolt head.
If possible, it is recommended to replace the Gasket and CamshaftPlug, so please consult with Wallet.
When replacing all the parts, the Tank/Quantity:Pair (for Left and Right) Without removing the Coil Horn, the Bolt cannot be removed from the front and back of the Engine Top Cover due to the lack of clearance.
If there is oil leakage from other locations than the bolt, other countermeasures should be taken.
Gasket1pc. of Head/Quantity:Pair (for Left and Right) Moon shaped CamshaftPlug1.35×13.5 4 pieces required
When the Gasket/CamshaftPlug is replaced, use the original Bolt and make sure that the Bolt is penetrating to the bottom, otherwise this product may be inserted only halfway.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Recommended for OEM Replace
The OEM mounts are subject to uneven wear on the chain and sprocket due to wear on the engine and strain on the chain over time, so they were replaced as a countermeasure and as a dress-up.
Before the replacement, the Chain had a tendency to be quirky in the gnawing area, but it is now straight.
My car body still seemed to have a kinked Engine due to age.
The pure Normal Thread Screw was also rusted and seemed to have rattled, so I was glad to replace it this time.
I think it will be Plus in practical terms as well, since it can also dress-up and prevent kinkiness.
It is a bit expensive, but I thought it was better than buying OEM.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Well made product.
I bought this because I changed my carburetor to a TMR, and it is an Exclusive Design, so it fits EXACTLY in the space where the Air Cleaner Unit was removed, and the oil catch tank can be laid out SMART, and the finish is great.
We asked our favorite Custom Shop to install the product, and they were impressed with the well-thought-out product without any particular difficulty.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1200DAEG
Too many gaps and no gaps
The product itself is where I would like the dimensions to be a little more in line with the body of the car.
There are many gaps at the top and sides of Battery
ConnectorQuantity at the bottom of the Fuel Tank:2pc. Set is the Quantity:2pc. Both sets cannot be installed in the OEM position and must be removed from the ConnectorHolder and connected via aerial wiring.
I wanted to PowerfulSpec. so I had no choice but to use it.
I'd trade for something else if I could find something better, but I'm not sure there's anything better out there.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Car Type Exclusive Design
The car model Exclusive Design is the only one that is actively fitting.
The space under the Seat is also larger and easier to use because the air cleaner box has been eliminated.
The price is A little high, so the cost performance is low.
I would have liked a Stainless mesh hose for the price.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
ZEPHYR750Oil seepage
Initial ModelEngine's problems were solved with a simple operation.
When the head cover is removed, it repeats again.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750
It's an Ideas product.
I was looking for a Cap that would fit well in the secondary air inlet when I found this product and purchased it immediately.
I really wanted to use the carburetor without killing the secondary air introduction function after replacing it, but the intake sound was so loud that it was tiring to ride, so I had no choice but to plug the carburetor.
When I bought it and got it in my hands, I saw this Cap. I've been hit. I thought www.
I didn't think KawasakiOEM Parts could be diverted.
Ideas fee.
View detail
Fits: KAWASAKI ZEPHYR1100
A necessity once the air cleaner is removed.
The OILCatch tank and Accessory Case are well put together and look Refreshing and Balance.
I am hesitant because of the price, but I think it is easier to use this product than to install different manufacturer's products and mess around with them.
The Accessory Case holds all the carburetor adjustment jets, tools, and dustcloth, so it is very useful for stopping along the way to readjust the carburetor.
View detail
Fits: KAWASAKI ZEPHYR1100
Installed on ZEPHYR1100
Is the price too high for the build quality?
Looks good, installs fine.
It is difficult to adjust the length of Hose.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
I wish it was a little cheaper
This solves the problem of the ZEPHYR750 First Model Type
I wish the price was a little lower
I wish there was a Rose sale from 1 pc
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
very good.
One year has passed since we started using it.
For now Oil bleed etc. etc. There is none. Oil bleeding from the under hole of Initial ModelHead which had been plagued for many years was easily stopped, so I am satisfied with Large change.
It is an atmosphere that it is likely to have until you open the next Head cover.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Troubleshooting.
If you thought about giving up, this kind of thing from Mr. GOOSE. So far Gasetc. Although I tried variously, the Oil bleeding from the preliminary hole which is Penetrating for some reason did not stop. I tried using Bolt here and it stopped just fine. How long is the durability after that?. View detail