Reviews
Fits: HONDA CRF150R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250RX, HONDA CRF450RX, HONDA CRF250X, HONDA CRF450X, HONDA CRF450L, HONDA CRF450RL
When OEM is not readily available.
I bought this one in stock because the OEM was Timing which was not readily available.
There are naturally no problems with performance, quality, etc., and we have the peace of mind of being a DRC.
Thank you for treating OEM Equivalent Product as a niche for Motocrosser as well.
Racer has a low Oil capacity and will be replaced as soon as possible.
View detail
The size is good and easy to use
Drilling holes in parts was troublesome, so I bought this bolted product. The location of the wire hole and the bolt fixing part are the same size as the head of the bolt, making it easy to use.too fast shipping, careful packaging.Give DRC a chance, trust it. Every piece produced is of high quality and good price.I'm glad to doing shopping from you , Thanks For Everything View detail
Fits: KTM 250SXF, KTM 350SXF, KTM 450SXF, KTM 250EXCF, KTM 350EXCF, KTM 450EXCF, KTM 500EXCF, KTM 250XCF, KTM 350XCF, KTM 450XCF, KTM 250XCFW, KTM 350XCFW, KTM 450XCFW, KTM 500XCFW, KTM FREERIDE250F, KTM FREERIDE350, KTM 450SMR, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450
Can be used with no problem
Product Name
DRC DRC Oil Filter
Item Number
D58-81-1020
Vehicles
EXC-F250
Number of man-hours
About 30 minutes
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, Driver, Hammer, Pliers, etc.
Why did you choose this product?
I was looking for an inexpensive oil filter that would fit the OEM oil filter, which was expensive, so I decided to purchase one because it had a good reputation.
The Plus alpha rating is also good because of the trustworthiness of the DRC brand.
Was the one you received as per Image?
It was exactly as shown in the Image, almost identical to the OEM one.
Was the installation difficult?
The installation method is not difficult as it is the same as the OEM one, just remove a few Screws and install them, but please try your best to remove and insert them as it is sometimes difficult to take them out when inserting and removing them.
How was your experience with it?
I don't think it will make any difference in performance. In my experience, I can't tell if the Oil Filter has changed or not.
Also, I don't know how dirty it is because I haven't removed it yet.
[Included Parts:were they on?
Body only, nothing in particular.
[Was there anything that disappointed you?
I would like to see it in a form that is easy to remove.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KTM 250SXF, KTM 350SXF, KTM 450SXF, KTM 250EXCF, KTM 350EXCF, KTM 450EXCF, KTM 500EXCF, KTM 250XCF, KTM 350XCF, KTM 450XCF, KTM 250XCFW, KTM 350XCFW, KTM 450XCFW, KTM 500XCFW, KTM FREERIDE250F, KTM FREERIDE350, KTM 450SMR, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450
HUSQVARNA FE250 2018
It is DRC, so it is safe to use.
I think it is good because it is replaced frequently, so it is cosmetic and safe to use.
View detail
Fits: HONDA CRF250L, HONDA CRF250L, HONDA CRF250LS, HONDA CRF300L, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLYS, HONDA CRF300L RALLY, HONDA XLR250R, HONDA XLR250RBAJA, HONDA XR250, HONDA XR250 BAJA, HONDA XR250M, HONDA XR400M, HONDA XR250R, HONDA XR400R, HONDA XR600R, HONDA XR650R, HONDA CB250F
Great oil filter, have been using it for 2 years
I prefer it for the CRF250L. There is always a spare filter. I love this oil filter. I have it for 2 years and use it on my bike at 30000 km, usually with an oil change every 5,000. I've had no problems with any part of this filter. The included sticker is very helpful. I plug it into my fork and I always know when my next oil change will be. I wish these came with some o-rings or gaskets that the bike needs, but that is expected as this filter is not from Honda and is much cheaper. This filter is one of the reasons I buy the female dental product if I can. View detail
Fits: KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250X, KAWASAKI KX450X, SUZUKI RMZ250, SUZUKI RMZ450, SUZUKI RMX450Z
DRCOil Filter
Used for KX250F
I will buy Repeat
It can be used without any problem even if you ride in a course that diversifies high rpm.
View detail
set of problems (e.g. in a textbook)
[How is it used?
The exhaust sound became a little quieter after replacing the deteriorated silencer with a new silencer, but it was still too noisy because it was originally a Racer, so we decided to add an additional baffle. Since there is no special product, I decided to use a ready-made baffle (techserfu K-MAX Baffle for KX250F), but since I could not install it as it is, I applied this product to the Silencer side as a place to hook the spring.
Was the one you received as per Image?
It looks like a part of Plastic model.
Was the installation difficult?
The two Rivets (upper side) of the Silencer were removed and re-tightened with the Plate, and the Plate was fixed to the Rivet by drilling a new hole in the lower side of the Silencer with a drill.
How was your experience with it?
The Baffle was installed securely as expected.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular.Material:Stainless Steel, so you can expect stable quality over the long term.
View detail
Easy to use and affordable
It's very helpful because you can use it on the screw part of the case cover.
This is especially recommended for CircuitDebut users.
If you're worried about BALI, you can sand it off.
View detail
Cospar good
Quantity at this price:1 Set of 3pcs. is an unparalleled value.
In the product image, it is connected like a plastic model, but the one I received was detached from the beginning and there was no BALI.
It's not very pretty, but the edges are chamfered to some extent, so it doesn't look cheap.
It comes in a bag with a zipper, so it's easy to store the remainder.
View detail
Required for Wiring!
This is a must-have item for Wiring! You only need to tighten it to the Engine Case, etc., so it can be used for most of the car models.
Cosmetically, I highly recommend it!
View detail
Perfect for making WiringSpots.
This is useful when there is no good salt in the body part of the wiring.
I am using it in Clutch cover near the Filler cap of Oil by tightening it with Bolt. Although the product itself is flat, I think the universalism is high because it can be bent with Pliers.
View detail
Fits: SUZUKI DR350, SUZUKI DR250R, SUZUKI DR250S, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC
No problem.
It's OEM compliant, and it's a well-known manufacturer's product in its own right, so there's no problem. It has been installed. I am not sure about the performance. I don't think the parts need to be extremely good, so I am satisfied. View detail
Size is perfect
Wiring Oil Filler Cap and Oil drain bolt, Oil I used it for wiring the filter, and I was satisfied with it because I could install it in the M6 bolt I polished it with PIKAL to make it beautiful But I have to cut it and remove the BALI to make it look good Let's do it View detail
For Wiring fixed it!
Drain bolt relationship of KTM RC 390 is numerous and there are not suitable places inevitably so purchase. I missed some BALI and gave it a File
Almost good.
View detail
Use other than Wiring
In using suspicious fuel consumption UPItems put in Fuel Tank, it will be impossible to take out as it is, so I purchased WirePlate to connect with Tank cap and Wire
It looks like a plastic model with RUNNER 125 as Base and 3 Plates are lined up, which is slightly different from the picture of product description. It separates and gates trace File, but Material : Stainless Steel so hard
In order to tighten the Screw of the Tank cap to the 2 mm hole which originally passed the wire, it was expanded to 3 mm with Drill and Wire was passed through the hole for the Bolt on the other side. Plate was straight, ready with Pliers pinching pinch angle
Even if the Bolt hole and the Wire hole were reversed, they could be fixed without any problems, and the appearance was finished in good looks. However, Plate 1 pc. Although the price is cheap but it does not run Circuit, I feel that I did not need 3 in a calm way ( - ω - `)
View detail
I have three
As this price includes 3, it is profitable.
Since it will remain Paris after detaching it, it is necessary to fix it with File etc..
Since it can be removed with Bolt, it is no more disconnecting Wire every time it is removed.
View detail
Pick for purchase
I bought it for Wiring of KLX 250.
It is a state where 3 pieces are connected in series.
Split to use (It can easily be torn by hand) It's just a shit.
The price is also cheap, if you do not need too many items it is recommended items of recommendation.
View detail
Oil filler's Wire lock
Buy Circuit Running to Wire lock Oil filler and Drain bolt, Oil filler simultaneously antlion : I purchased 30101-BK Oil Filler Cap.
WirePlate is attached to Clutch coverBolt and its tip protrudes so it is folded to 90-degrees and it is used.
For Drain bolt, Hook hooking the Spring between Exhaust Systems was just in a good position, so WirePlate was not used. As you can see in other comments, when you separate 3 Plates, BALI will remain, so you will need to scrape with File, but you can take BALI immediately.
View detail
Fits: SUZUKI DR350, SUZUKI DR250R, SUZUKI DR250S, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC
Since it can purchase freely rather than purchasing an original manufacturer's product, he buys the occasion which purchases some another goods.Although the difference of the engine performance cannot be felt, it is used and is satisfactory at all.Althoug
Since it can purchase freely rather than purchasing an original manufacturer's product, he buys the occasion which purchases some another goods.Although the difference of the engine performance cannot be felt, it is used and is satisfactory at all.Although the Rubber packing was also attached before
, probably because it is a Reduction in cost, a Packing is a point with regrettable having stopped being attached.
View detail