Reviews
Can be installed after everything is connected.
I love the fact that it can be installed even after the plug cord has been newly installed and connected to the Coil!
But the price is high. I think it is too high.
How durable is this resin? If it has a high resistance to heat, this price is acceptable.
How long will it last with Engine heat from now on? This is the beginning of a long, long research period.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled)
Great!
It was great!
Reliable product!
View detail
I think it's fine for normal use.
I replaced it when refresh the electrical system, and it is neither good nor bad, but normal.
Exclusive Design by a Manufacturer was more effective!
View detail
Purchased to refresh electrical system
I think it's normal, for better or worse.
Cable was immediately replaced by NGK
Trouble was not there, so I gave it a high score.
View detail
Thank you for 6 years.
Purchased about 6 years ago. The reason I bought it was because it was a dated OEM Product, but before it broke! I bought it before it was broken.
After purchasing and replacing it, the car was in great shape and kept going strong, but then it just came out of nowhere! It's not so easy.
There are claims about the product, but I guess that's just the way it is after a few years.
View detail
PMC Ign lead markers
Markers fitted easily even to the larger 7mm silicone leads on my Kawasaki. They give the original look and they are still holding on well. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
Overcome weakness
Easy to install, just apply Grease to the O-ring and plug it in. Approximately 1 cm of Plug cord Cut is required for the Plug cord coating and copper wire to become Tsurishi. It was easy to understand with handling Instruction Manual. View detail
Miscellaneous products
First, there is no problem with the function as a product.
You can use it firmly as Coil. Compared to OEMCoil a decade ago, I got astonishingly good.
However, as a product "Chic" I felt that..
Even though it should be brand new, the whole was all bruised, the finish of Wiring was sweet, the covering of the base of the WhiteBlack code was torn, and the cord was exposed.
In addition, there is a rather deep abrasion at the base of Plug cord, and I wanted to doubt whether it is diverting second hand goods.
Because NGK's Plug cap is attached and Coil itself is not a frequently replaced part, I think the price is reasonable, but I had to add it before I installed it. It is regrettable that it is not a polite product at all.
I'm worried about how durability is.
View detail
PMC Thanks!
I attached it to a solid of 71 years.
Although there was not Trouble in OEMCDI in this way, but 40 days ago electronic components,
It is natural that it is deteriorating. I exchanged it before I passed away.
Reaching the installation. Quantity : Pair (for Left and Right) If you do not remove the Side cover, Seat, Oil tank,
Access to Bolt which fixed CDI was extremely difficult.
If I could loosen the OEMCDI installation Bolt, as much as 80% of the work ended.
Later, just connect the wires that are connected to the actual street.
As a confirmation work, remove the ignition plug of each cylinder from the Cylinder head and make it Head to Earth
Turn on Main switch and step on Kick pedal, you can see sparks from ignition plug.
Install all the parts in their original position, if the Engine hangs OK!
Although it was an impression that I tried riding, it moved normally without any problem.
One thing worrying has been reduced.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R
For weakness of GPZ
GPZEngine 's crying place No. 1 Plug Items to prevent water ingress, I feel that Waterproof properly shape. I do not understand the basic wet so I do not know the effect well, Large I ran through the rain and sometimes I was going to pump it so I'd like to use it for all four if possible. Easy to install. The price is quite good. View detail
Probably better than new quality. Just remove bolts to tail light and re-install. Very sturdy. Hard to find in good condition. Lucky that Webike manufacture these.
Probably better than new quality. Just remove bolts to tail light and re-install. Very sturdy. Hard to find in good condition. Lucky that Webike manufacture these. View detail
Fits: KAWASAKI 400SS Mach II (S3), KAWASAKI 350SS Mach II (S2), KAWASAKI 250SS Mach I (S1), KAWASAKI 750SS Mach IV (H2), KAWASAKI 400SS Mach II (S3), KAWASAKI 350SS Mach II (S2), KAWASAKI 250SS Mach I (S1), KAWASAKI 750SS Mach IV (H2)
It's nice to have an OEM strap in place. Helps keep the bike original and correct. Appreciate the speedy service and also producing these other hard to find items. Helps the perfect restoration. Paul . ASustralia
It's nice to have an OEM strap in place. Helps keep the bike original and correct. Appreciate the speedy service and also producing these other hard to find items. Helps the perfect restoration. Paul . ASustralia View detail
Very nice ignition parts. I think they may be much better than old NOS pieces. I have fit my H1B with the ignition of an H1D. The ignition coils works perfect!!! Robert
Very nice ignition parts. I think they may be much better than old NOS pieces. I have fit my H1B with the ignition of an H1D. The ignition coils works perfect!!! Robert View detail
Although any problem cannot be found in use, it is a Set with which the code of a TAYLOR follows the Plug cap of NGK. -- since it all is not NGK, there is no misunderstanding -- as . Since a cheap ? problem does not have a cost price, the way of th
Although any problem cannot be found in use, it is a Set with which the code of a TAYLOR follows the Plug cap of NGK.
-- since it all is not NGK, there is no misunderstanding -- as .
Since a cheap ? problem does not have a cost price, the way of the
TAYLOR is Ok.
View detail
An order was placed together with [ this time ] the PMC strengthening type Ignition coil. It is a nonchalant dandily indispensable excellent piece. A Design is not too large, either and is very pleasing.
An order was placed together with [ this time ] the PMC strengthening type Ignition coil. It is a nonchalant dandily indispensable excellent piece. A Design is not too large, either and is very pleasing. View detail