Reviews
Just fit like OEM Product
I purchased again this time.
It is mechanical and looks great on the air-cooled CB1100. It is not accurate, but it allows you to check the degree of oil temperature rise and has the effect of preventing overheat in the summer,
View detail
For NINJA400R
Installed on NINJA400R.
I was able to do it without removing the cowl, but I had a little trouble tightening the bolt because it was too small.
If the installation had been a little easier, I would have given it a perfect score without any complaints.
View detail
Replacement from OEM Product
I replaced the OEMCap that was too assertive for my Black vehicle with this one. It is not a compatible car model, but … I was able to install it without any problems.
I haven't driven the car since it was installed, but I'm happy to say that it looks exactly how I expected it to look with the uniformity of the Black color.
View detail
Yoshimura Radiator Guard
As expected, Yoshimura and Suzuki are a perfect match.
I've wanted it for a long time, and I'm so glad I finally bought it.
The finish itself is very luxurious and sophisticated.
The price is quite expensive, but I think it is an item that makes the bike more stylish.
I recommend to anyone considering purchasing.
-------------------------------------------------- -------- As expected, Yoshimura and Suzuki are a perfect match. I've wanted it for a long time, and I'm so glad I finally bought it. The finish itself is very luxurious and sophisticated. The price is quite expensive, but I think it is an item that makes the bike more stylish. I recommend to anyone considering purchasing. Powered by Google Translator
View detail
It is not usable as it is.
I replaced my mc22 94 with this one because it wouldn't stop leaking.
The replacement itself was easy.
However, liquid is leaking from the Drain section.
I thought this might be the case, so I removed the drain bolt and found a seal washer on top of the black paint, as well as a groove on the bolt for a crimp. It was no wonder the bolt was leaking.
The paint was removed with sandpaper and the Bolt and Washer replaced with OEM.
The leak has stopped.
The product itself is solid. But it needs a little work.
View detail
Fits: YAMAHA MT3, YAMAHA MT-25, YAMAHA MT03
Just fit in the current model
It can be installed on the current model (RH21J) MT-03 without any problem.
As is the case with other people's Impression,
Many of the products made by other manufacturers have logos or company names with decorative etchings,
If you are not good at such things, or if you prefer simplicity, this Radiator guard is a recommendation.
The manufacturing process is very solid and simple, which gives the manufacturer a sense of confidence.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I got a different impression than I expected.
I bought it because when I went to Hokkaido Touring, I found a lot of insects stuck in Radiator.
It's quite expensive and I've been slow to put it on since it's winter and the bugs are gone.
When I put it on, the Core was not as visible as I thought it would be, which is good because it gave a different impression.
Design is a matter of taste and I think I am just fine.
You have to run it in the summer to see if bugs get caught in it.
View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Eliminator400
Radiator for protection
The bare Radiator was installed for protection.
I chose that one because I wanted to unify the color with Black, but Large was the right choice.
The only thing left to do is to hope that the cooling performance will not drop.
View detail
Fits: KAWASAKI Z1100GP, YAMAHA YZF-R1M, YAMAHA YZF-R1, HONDA X11, HONDA VRX400 R100 ROADSTER, HONDA STEED600, HONDA STEED400, HONDA JADE, HONDA HORNET250, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA YZF750SP, HONDA CBR250RR (MC22), HONDA CBR250R (MC17/19)
Sensor
I received a package today. The sensor is the one I would need. BUT!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! -------------------------------------------------- -------- I received a package today. The sensor is the one I would need. AIM!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! Powered by Google Translator View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
MORIWAKIBrand is still the best!
I have been using inexpensive foreign products, but the black painting was so crude that it rusted quickly. I don't think it will rust red because it is made of aluminum, but I will maintain it by taking care of corrosion peculiar to aluminum. View detail
I am satisfied with the product.
I am very happy with the price and the workmanship. View detail
Often used in racing vehicles.
Open valve pressure can be increased to 1.6 kg from OEM.
Recommended for harsh environments like Race.
It can reduce the likelihood of Overheat.
When I hear DRC, I think of Off-road Image, but I use it for On road motorcycle.
View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Looks good for Engine.
The effect was not felt on the ride, but it seems to reduce the load on the Engine. View detail
Used for CB750rc42
I did some research and found out that this product for CBX400F fits CB750rc42, so I installed it immediately.
Simply remove the O-Ring on the original Oil Temperature Meter and install it.
It was Exactly
It's an air-cooled Engine, so it's a necessity to avoid Overheat in summer traffic jams and such!
The engine of rc42 was originally a CBX750F engine, so I removed the filler cap on the Left Side and put it on.
View detail
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
Radiator protection
I have been interested in these parts for a while, but the price was so high that I thought I could buy a RadiatorBody with a little more money…, then the price of OEM parts went up and the spring sale started, so I decided to buy them.
The installation method was to hook the claws of the Core guard onto the upper part of the RadiatorBody and fix the lower part between the attached Bracket.
I was worried that they might come off, but they seem to be quite precise and firmly fixed.
However, the bolt, washer, and nut included with the lower bracket are small, so those who are not good at detailed work may be frustrated. However, the Bolt, Washer, and Nut attached to the lower Bracket are small.
I dropped the Nut a few times, so I think it would be better to lay down Dustcloth, about the size of Matte or Bath towel, around the area before working on it to prevent it from rolling around and disappearing somewhere.
Until now, because the price of the core guard was close to that of the RadiatorBody in the case of the Black Type, I thought that I should change the Body if it was bent, but when a relatively large stone was hit by bad luck during a touring trip, the coolant water would leak and it would be impossible to run, so I changed my mind. However, I have changed my mind that it would be better to install it as a precautionary measure in case I fall.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09
Genuine R&G Radiator Guard for Yamaha MT09 2019
This was a part I wanted to get for my wife's bike, the MT09 which did not have a guard on the radiator. I have used R&G many times before forjust this part as they are great. Finding the right one for this MT09 was not hard as I just checked R&G website and that gives you all the alternative for options on this bike. The guard from R&G was pretty good and was a little cheaper thn I could source locally. With a couple of other smaller parts already in my basket, I got them all shipped voa EMS together to save ona bit of shipping. EMS got my order to me in perfect condition on 5 days. The radiator gurad came in the R&G box andhad all the accessories I needed to fit to the bike. I have to say, a long time ago, I did have a radiator guard from R&G and the paint finish did not last too long but by the looks of this new one now, they have improved the paint finish tremendously. This has a nice shiny but kind of matt finish. The mesh in the grill is small enough to not let any big rocks or stones through ehich is great in my opinion. Yes, I could have got a different radiator gusrd from another brand but I do trust R&G nowadays. Fitted easily enough but take your time and you will be fine. The overall is excellent and really hides the radiator nicely. Very pleased and so if the wife. Thanks Webike. View detail
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
K-factory radiator core guard
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View detail
If you choose Simple, this is the one.
I was looking for something simple and simple from a proper manufacturer, but I didn't want something with a design such as a manufacturer's logo.
As expected
View detail
Radiator hose
Used for MD47
Purchased while replacing Coolant
Softer and easier to insert than OEM
If you remove the Radiator without sidestepping it.
No problem working on the other side.
Glossy Red may not be to your liking.
View detail