Reviews
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Looks defensive and surprisingly light
[How is it used?
Not only for forest roads, but also for standing stones.
Was the one you received as per Image?
Seems lighter than expected. Seems to be defensive.
Was the installation difficult?
The instruction manual was very helpful, but one thing it did not fully describe was how to install the cable while forcibly releasing the cable and other parts.
How was your experience with it?
I don't want to fall down!
[Included Parts:were they on?
No shortage of installation.
[Was there anything that disappointed you?
Plate was clean but had some spot corrosion on the shaft….
Other items that would be helpful
Exterior and tank displacement must be done as described in the instruction manual, because it was tough if not done as described.
View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA WR450F
About installation
I haven't used it, but here are my thoughts on the installation.
We installed the Radiator after a few falls, and it was slightly distorted.
I had a hard time finding the right position for Shroud's mounting screws (lol).
If you are thinking of installing it, it would be better to do so while it is intact.
Also, I find it difficult to see the pictures of BlackWhite in the Instruction Manual.
If you don't anticipate that this is how it is supposed to be installed, you will have a hard time with the instruction manual alone.
At least a color photo would be highly helpful!
Well, I can manage to get by somehow, but I guess I need a good amount of sukill. (Lol)
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
It is easy to install.
The installation was done in less than an hour by following the instructions in the instruction manual that comes with the unit.
The dimensions were Exactly and installed without any modification or forced screwing.
I haven't beaten the Motorcycle yet, so I haven't tested the true protective performance, but it is firmly pushed by hand without any wobble.
I am satisfied with the installation and Large
I think this product is intended to protect the sides of the Radiator, so I think other products are needed to protect the front side (fin part) from flying rocks, etc. I can install the OEM plastic cover as is, but there is a gap, so I will consider installing a mesh coverretc. from Other Brand Product in the future. I can install the OEM plastic cover as it is, but there is a gap, so I will consider installing a mesh coverretc. of Other Brand Product in the future.
View detail
Fits: HONDA CRF1100L, HONDA CRF1100L DCT, HONDA CRF1100L ADV SPORTS ES, HONDA CRF1100L ADV SPORTS ES DCT
Some parts are not guarded.
[How is it used?
Purchased for Radiator protection. Standard Material:I didn't think Plastic's Grill would protect it at all.
Was the one you received as per Image?
Some Radiator is not protected, as mentioned in the other imprements.
Was the installation difficult?
It took a long time because it was in a slightly complicated location without exterior removal.
How was your experience with it?
I can't rate the forest roads as I haven't mentioned them so far.
[Included Parts:were they on?
Spacer and translation (Instruction Manual included, please type here).
[Was there anything that disappointed you?
This is where some parts are not Guard.
We are planning to use a Stainless Steel plate with holes in the Home center to make it possible to guard the entire surface.
[Opinions and requests to Manufacturer
Please come up with a product that can cover the entire surface.
View detail
Purchased to protect Radiator
[How is it used?
Purchased for Radiator protection purposes
Was the one you received as per Image?
Street Image
Was the installation difficult?
No special processing was required.
How was your experience with it?
I don't know yet because the effect will be felt when I fall over.
[Was there anything that disappointed you?
Too bad there is only one color.
View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA WR450F
Here are my impressions of the installation on a 2020 YZ250Fx.
I am used to servicing them and was able to install them with no problems.
I haven't had any bumps yet, so I don't know how strong it is, but I feel safe attacking it.
I bought it immediately because it was at a discount price.
Thank you very much
View detail
Fits: HONDA CRF1100L, HONDA CRF1100L DCT, HONDA CRF1100L ADV SPORTS ES, HONDA CRF1100L ADV SPORTS ES DCT
Some parts are not Guard at all.
We were not sure about the US Honda OEM, but we chose this one because we thought it would be better for the purpose of guarding the vehicle.
As for the installation, we were able to replace the middle cowl without difficulty because we had removed the middle cowl to do other parts at the same time.
Fitting is also good.
However, there are some areas that are not protected at all, which I will post pictures of. I am not sure about this.
View detail
Installed on a WR250R
The Radiator was installed so that it would not be crushed in the event of a fall.
I removed the plastic behind the Radiator, but it might be better to have it so that the feet do not get hot.
View detail
Fits: HONDA CRF1100L, HONDA CRF1100L DCT, HONDA CRF1100L ADV SPORTS ES, HONDA CRF1100L ADV SPORTS ES DCT
really? (in questions)
Can it be installed without removing the Cowl?
I suspect this is the crux of the matter.
As it turns out, it did stick.
Or rather, the NORMAL Material:PlasticGuard.
If you can remove it with that Instruction Manual, you can do it.
View detail
I feel safe
Other reviews have said that the quality is poor even though it's ZETA and that it's hard to install, etc. However, if you tighten it up after temporarily fastening everything, it can be installed Exactly. I felt that it was simply too well made and had little play. View detail
Accuracy Outclassing
It's made by ZETA. It is well made.
I've read on other reviews that they are poorly made or that they were forced on, but they all install easily if you tighten them down from a temporary fix. I think it's just a bad effect of too much Exactly because the accuracy is good.
View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
I chose this one to run the Motocross course on my 2012 crf250l.
As a self-propelled rider, we chose this one because we need to drive home from the course by ourselves no matter what.
As for the installation, even if it installs with a cumbersome structure that does not seem to be zeta, even if it installs with such a heavy work, is Large sturdy? I was worried about it, but once it is put on, it is the completion of the radiator bumper. As for the performance, unfortunately, there was no chance to try it because we are famous OffRider who does not fall down.
View detail
Fits: HONDA CRF250L Type LD, HONDA CRF250M, HONDA CRF250L
I wish I could guard the front as well
I added the Guard to the Radiator because I heard that it sometimes breaks on the forest road It seems to protect the sides of the bike
I just wish I could have protected the front as well
The installation was a bit of a tour de force, but it didn't take that long
View detail
Fits: HONDA CRF250L Type LD, HONDA CRF250M, HONDA CRF250L
I wish I could guard the front as well
I installed it on my CRF250L
Installation was a tour de force, even though it is specific to the type of car It's also a shame that the Core on the front does not protect it
It feels poor for the price We'll see how much protection it offers in the future
View detail
No installation problem
Non-machining and non-interference attachment to WR 250X. Since the rectifying plate on the front is also attached as it is, it fits well like the OEM Parts. For the moment I have not done mushie like crushing Radiator, so strength is unknown. View detail
Please check the assembly before commercialization.
I think that it is good as a part Single Item.
However, interference with Radiator BodyRib, resin Air Panel
As far as the Instruction Manual can not be installed.
After all, I had a hard time installing it by machining the resin side.
View detail
Fits: HONDA CRF250L Type LD, HONDA CRF250M, HONDA CRF250L
Is it really for car models ??
I bought it because it is famous Manufacturer and there are no other choices. It does not fit smoothly that it is supposed to be the vehicle type Exclusive Design. Although there is no need for processing, it is a feeling that it gets caught by pulling around here. Feeling that I wore a steel plate one by one rather than saying Guard the Radiator. Even though there is an effect on the puncture, the impact is likely to be transmitted to Moro.
Also worried that Stress has been applied to various parts in the attached state.
The appearance is just solid Aluminum. There is neither texture nor feces. You like the person you like.
Instruction Manual is easy to understand.
The base of the car body to which the upper bracket is attached easily bends. I guess there will not be any effect this ... well I guardians..
It was disappointing content only for the products I expected.
View detail