Reviews
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS
It is an excellent product that gives a custom feel and protects Oil cooler!
My Custom is Plating or Silver to give a Gold genus feel,
I was looking for it and BEET was offering it, so I bought it immediately.
The black oil cooler is now gorgeous and has a custom look to it. It is two birds with one stone as it also guards against small stones.
I prefer EmblemType, which is smaller in size, for BEET letters, but this is the only product I could find, so I had no choice but to buy it halfway through the process.
I gave it 4 stars because the BEET letters are Large.
I completely prefer it (laughs).
View detail
Used for ZX-4R
I found the same part number for ZX-4R on the official BEET website, so I bought it. I think it is meaningful.
For general use, would it work as protection on highways?
I've worn them on other motorcycles I've ridden, but performance is secondary because I'm after looks.
View detail
It is easy to install.。
The Design was the best of many.
Core guard should be attached.
View detail
I think the design is good
Design and texture are good.
However, when the product is attached to a vehicle, a chattering sound is generated.
The upper part is fine, but the lower 10mm Bolt mounting part has almost no play and can only be mounted at that location, causing play and a chattering sound.
View detail
Wow that's cool
I decided on BEETJapan because they had the best design. View detail
I like the Design
I purchased this product because I liked the design. It was easy to install, but the Guard part seems to be a little distorted. I have never seen other companies' products, so I don't know, but I guess that's just how it is... View detail
Expensive but unique
Exhaust System, footpeg, and BEET were made by BEET, so we matched them.
I think the performance is not so different from other companies, but the design is one-of-a-kind.
For those who insist!
View detail
Nice finished made
Perfected finished made nice colour It can definitely protect the water tank The "beet" logo can be highlight of the bike View detail
Fits: KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI ZX-14R, KAWASAKI 1400GTR
It's cool
Since the Exhaust System is BEET, the RadiatorCard is also BEET.
It's not a prominent component, but the glimpse of BEET's Logo is cool!
Of course, the Radiator is not easily scratched, and the water temperature does not change before and after installation.
View detail
One point・Dress-up
From the front, the OEM had deteriorated considerably and was replaced.
YOSHIMURA is also available, but since it is Kawasaki, it is BEET.
The price is a bit steep, but I'm glad I put it on.
A must if you want to have it in BEET.
Parts, Bolt On, so it is easy to install.
Recommended
View detail
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS
Insufficient strength
The upper mounting Bracket part broke cleanly after only a short drive after installation. There is a quality problem. View detail
If only the prices were a little lower!
I did not plan to install the Radiator guard at first, but I thought it was too late after the Radiator was broken because the standard TireS22 of NINJA1000sx rolls up gravel unexpectedly, so I bought it.
When I purchased this product, I considered other manufacturers, but I felt it was a little expensive, but I bought this product because I liked the design.
As you may have seen in other people's impressions, it is troublesome to have to remove the Cowl, and the anti-vibration rubber at the place where the Bolt is fixed on the lower side does not hit between the Radiator and the Guard as it is, so I processed it in my own way and installed it.
To be honest, I don't know the effect of installing it, but I think it's better to have it as insurance.
If you look at the Single Body, the Logo of BEET is Parenthesis good, but if you install it, you can't see it unless you look into it, so there is a point where you feel that 20,000 over is high to be honest, but I think this is the best among those sold now, and I like it.
View detail
Cool!
I did not remove the Cowl and worked on it.
I worked carefully to avoid damaging the Cowl.
I don't know why it's the fastest.
It's cool, isn't it?
View detail
Thank you BEET!
Thanks BEET for putting out one for the ZrX! View detail
Core guard
It means protecting the Radiator from stone bouncing, etc.
I bought it immediately as dress-up parts with Logo.
Other models have been on the market for some time, but
For ZrX400, the new release
I was looking forward to the Large change.
I think it's a bit PelePera…
I don't know of any others, so is this what you think?
But overall, I'm satisfied.
View detail
SmallThe first Custom before the stone flies
Buy it before it gets dented by Small stones.
The only BEETItems on my zx25r
View detail
BEETRadiator guard
The design, performance, fitting, and ease of installation are all top-notch products of BEETBrand.
I've been using BEET products for a while now and I'm very happy with them.
I bought from Webig because they were the only one who had it in stock and delivered it immediately.
I was happy with the product I bought.
View detail
BEET water tank guard
My car is Kawasaki Z900RS, the year is 2019. I bought the BEET water tank guard on webike. I like this water tank net very much. The logo of beet is made a lot, which is comparable to that of Yoshimura. The shopping experience this time was great, because the customer service was very patient and guided me to buy products. ---------------------------------------------- My car is Kawasaki Z900RS, the year is 2019. I purchased BEET grille on webike. I really like this water tank net, mark beet to do a lot, and there than Yoshimura. The shopping experience is great, because customer service is very patient guidance I buy goods . Powered by Google Translator View detail
Parenthesis good at best.
I've seen a lot of covers that say cb400, but I was worried about accuracy and overheat, so I went with this one.
As expected of BEET, the price is … but the construction is very good.
Fitting was no problem at all!
A mere Cover costs nearly 20,000 for a mere Cover, it's more expensive than a YOSHIMURA! I thought it was a good idea, but I'm glad I bought it as a result, lol.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z800, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z800
high
Installation was super easy.
It looked perfect.
Since the only fixed part is the lower center part
Both corners of the lower part, Left was good.
The Right corner was floating and flapping around.
I also felt the price was a bit too high.
View detail