Reviews
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
Somehow.
It's just a replacement, because I can replace it with 3 Screws. View detail
Attachment was installed using a separate Attachment.
It is attached using Attachment between RadiatorUpperHose.
There are similar products other than KOSO, and the font style of the numbers is difficult to read in the similar products.
The image is KOSO OEM Product.
OEM Product is in short supply, but we had it in stock here, so we purchased it as a spare.
View detail
I've got something. can be seen and understood
[How is it used?
Double-sided tape for Emon's exterior is attached to the back of the headlight (PROTEC LB7W-H LED Headlight Valve).
Wiring is taken from:Fuse power supply, as I recall.
Period:September 9, 2018 to September 10, 2023 to date.
Distance : 68,197 - 26,169 = about 42,028 km
Was the one you received as per Image?
As per Image
Was the installation difficult?
The USB power supply was connected in the form of an addition to the place where the USB power supply had originally been added, so I think that there was little difficulty.
How was your experience with it?
*I do not have any equipment to measure voltage, so I have no idea about its accuracy.
Easy to see and read.
In the case of the last number 5, in particular, I remember that I felt a sense of discomfort even before the Engine completely stopped working. Especially in the case of the last number (5), I remember that I felt a sense of discomfort even before the Engine completely stopped operating, so I feel that if the values are not the usual ones, it will lead to early detection of abnormalities.
When connected to USB power supply
2. when using Grip heater
3. when cooling fan is in operation
4. When Cell Motor is in operation
5. when the Generator was completely black
The voltage of the battery is always in view, which is one of the reasons why we decided to replace the battery.
The engine is not benefited by the running wind, and the exhaust heat of the engine and the heat of the headlight are tormenting it, but I have not encountered any failure like failure yet.
[Included Parts:were they on?
I don't remember.
[Was there anything that disappointed you?
N/A
To be able to display information about electricity that is not visible to the eye, I've got something. I thought that Merit was a strong choice as a way to realize the "Merit". As a start to notice the "Merit", I thought Merit was strong because it is not expensive, and as the product name suggests, it is thin and compact, so it can be installed anywhere you want.
View detail
Fits: YAMAHA CYGNUS Griffith, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX125
nice looking tank cover
My motorcycle is YAMAHA NMAX155. The original water tank cover has a relatively large gap, and it is easy to be hit by splashing gravel on the soft heat sink during riding. This KOSO Radiator Cover increases the density of the protective net to make it better Protect the radiator of the water tank, the appearance is anti-carbon fiber, and the red guard net is very beautiful. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The original water tank cover is relatively large, and it is easy to be hit by a soft cooling tablet by splashing gravel. Protect the water tank heat sink, the appearance of carbon fiber, and the red protection net is very beautiful. Powered by Google Translator View detail
Fits: YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA CYGNUS GRYPHUS, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA X FORCE, YAMAHA FORCE2.0
KOSOQuality is stable.
I was going to buy a different color for the grille separately because the red color doesn't match my motorcycle, but there was black, so I bought this one.
The OEM can be removed and replaced by unscrewing 3 places.
I'm not sure about the cooling effect, but at least it hasn't gotten worse. I chose it for its appearance.
View detail
Keeps big bore tuned engine cool
If you add big bore kit, performance pipe and high loft cam the engine's operating temperature goes up. The ore efficient radiator helps keep the engine at normal temperature especially if you live on a hot climate. View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
Mini3 Digital Air-Fuel Ratio Meter from Koso
* About quality and texture, Weather resistant all black plastic housing with rubber covered selector button and a simple digital readout. * About the feeling of use, Very handy to be able to view the air-fuel ratio the ECU is receiving from the O2 sensor and know the engine is operating safety. * Products to buy together, You will be needing to also purchase a mounting bracket that suits the available space out you guage. * Difficulty of installation, Installation required fairing removal to access the connectors and position the wiring harness. The process was completed in 60 minutes with a little difficultly. * Cost performance and comparison with other products, Very cost effective way to view the air-fuel ratio using the stock O2 sensor. Other products require there own O2 sensor attached to the exhaust pipe which significantly increase the price of their product. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, For your mounting bracket needs checkout the Koso super slim meter bracket which is designed for the mini3. Use the product reviews to assist in making a decision on your purchase. View detail
Fits: YAMAHA CYGNUS Griffith, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX125
it's recommended.
I was surprised that the delivery was very fast.
The quality is very good.
Adhesion was also very rested.
However, it was a pity that there was no ring on which the electric wire could be hung.
When making additional, it would be nice if this hook was made.
I'm Korean, so I used a translator to write this sentence. -------------------------------------------------- -------------------------------------------------- -------- I was surprised that the delivery was very fast. The quality is very good. The adhesion was very closed. However, it was a pity that there was no ring that could hang electric wires. When making additional I'm a Korean, so I created this sentence using a translator. Powered by Google Translator.
View detail
Fits: YAMAHA CYGNUS Griffith, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX125
dress up
The radiator air also looks good and has red points, so it is very good as a dress-up. Installation is also easy. I like the product because it was carefully packaged and arrived without damage ~~ I am very satisfied because the delivery time did not take too long The radiator air inflow looks good, and it has a red point, so it is very good for a dress-up. It is also easy to install~ The product arrived without any damage because of the meticulous packaging of the product. I am very satisfied with the delivery time. View detail
Used for voltage indication on NSR250R
It is just the right size to fit on the Top Bridge of NSR250R. The voltage is displayed without any problem. The voltage displayed was also accurate. View detail
Versatile
I bought this as an Oil Temperature Meter for my CYGNUS.
I thought it could be used as an Oil Temperature Meter as well as a water temperature meter since it only says "Thermometer", but it was usable as expected.
Since I could only take the oil temperature from the drain bolt, it may vary considerably, but I was able to confirm the correlation with the oil temperature taken from the cylinder head, so I think it is a good guide.
According to the product spec, when the temperature exceeds 120℃, it only flashes and does not display any further temperature, but this did not affect me particularly because the oil temperature from the drain bolt never rises to that level.
The difference in oil temperature between the cylinder head and drain bolt is said to be about 20 degrees Celsius, and mine was about the same for a large cylinder.
My friend is currently using it as a water temperature gauge, and it is working fine. I think the durability is quite good.
The price is also low, so I am happy to be able to use it when I am testing a vehicle.
It is also very useful because it has many Adapters and can be used in a variety of ways.
View detail
You can see the battery status at a glance.
When you don't ride your motorcycle for a long period of time in the winter, the battery gets weaker and sometimes the cell doesn't turn over when you want to ride, which can be very disappointing. So I installed this product so that I can check the battery voltage at a glance and if I turn on the Ignition, the voltage will be displayed and I can check the battery status immediately and charge the battery in advance. I installed this product on two bikes, FZ750 and MT-09. View detail
KOSO Multimeter
Used for cylinder head of Scooter
It has a measurement range of ~250, which is just right for air cooling.
Very good, with warnings.
View detail
It's beautifully made.
I use it for SUPER CUB.
This is a very nice Anodized Finishing Bolt type Sensor.
Since it is exposed to the terrible conditions under the Engine, it deteriorated and broke once, but I bought the same one again and am using it.
It's not possible to repair it with Solder because it breaks from the root, but it's the one and only product, so even if it does, I'll buy another one and use it.
View detail
Durable
It has already been two years since I bought it, but I will write an impression.
I use it on my SUPER CUB Oil Temperature Meter.
The Oil Temperature Meter of Analog that can be inserted into the Oil level gauge is good for CUB, but this type is more practical.
It is very safe to see the oil temperature in real time in the middle of summer when I am afraid of overheat because I don't have oil cooler on my car.
I think it is common to measure with the drain bolt under the engine, but this product alone cannot be installed. KOSO Temperature Sensor [M14×P1.25] I purchased the Bolt separately and replaced the Bolt with the Sensor (Aluminum washer is across the OEM Product) and connected it.
I have been using it almost every day for 2 years and the Sensor has been broken from the root once and replaced, but the Body is working fine.
The display is a little darker than when it was new? It is a degree.
I've put it on and off many times to change the oil, but it hasn't leaked any oil.
It is just a little bit troublesome to disconnect the Sensor when changing the Oil, but there is not so much problem in the work itself because the Connector is located near the Bolt.
It seems to be made in Taiwan, but I think it's excellent! (^^)
View detail
Sensor attachment with no processing
I want to run an Oil Temp Meter or Water Temp Meter on my VMAX1200. But I was looking for something that can be quickly returned to OEM if something goes wrong at the touring destination without modification.
So I stared at the service manual.
There is a service hole for oil pressure measurement near the rightfootpeg, remove it and check the depth.
I ordered it because it seemed Large sturdy even with Sensor in it.
On the Drain bolt, since the screw mountain became a little suspicious, the screw mountain was corrected with Tap and One-touch Drain was installed, and it was installed separately in order to preserve it.
I installed the service hole for oil pressure measurement because I thought it would be possible to measure the oil temperature.
In the case of Drain, there is a possibility that you may not notice the Oil leak when you are on the road, and Risk could be avoided for the time being.
Fortunately, it is working normally. And Wiring is crawling to Frame and killing two birds with one stone.
View detail
I bought this to measure oil temperature, not water temperature.
I think you use it as a Water Temperature Sensor, but I install it as an Oil Temperature Meter.
We distinguish between Blue for water temperature and Red for oil temperature.
The image shows the Sensor installed by digging a 1/8 PT Tap into the Plug that is screwed into the Oil pan for no reason.
The oil temperature is quite Large cut.
The video shows the operation of the oil temperature and air-fuel ratio gauges.
View detail
It's easy to see, isn't it?
I've been using the RX2NMeter for a long time.
I purchased this for the Meter change.
The Coupler is still the same as it was in the past, so I thought if it's a Waterproof ConnectorType, I'll be able to get it ….
Wiring is as thin as ever, though!
View detail
Compact and good product
Installed on GSX-R1000R L7. sensor is koso's M16Sensor I used an adapter to install it in the deeper Oil galleryBolt hole Oil galleryBolt holes in the shallow end have Oil Temperature I installed the MeterSensor Both bolt holes are M16
View detail
Compact and unobtrusive
I installed it on my Bore up APE 50 I bought it to understand the condition of the oil temperature rise in summer I chose this one because I didn't want to wear a large meter
MeterSensor Adapter for the KOSOMeter if you want to install the APE 50 M12 P1.5 L15 was needed separately, so I bought this one too
It's been about a month since it was installed and so far it's been working without any problems
View detail