Reviews
Replacement of DAYTONA battery-powered CompactMeter
The 2nd was a battery-powered Daytonacompact temp meter due to malfunctions with Noise. Every time I changed the battery, the nail broke or the battery could not be fixed properly, and I ended up with 3Quantity:I bought a set. I wish I had bought the KOSO set earlier, considering the fact that the DAYTONA set will go into HHH mode if it exceeds 99.9c, making it impossible to measure. I am going to install the Minus at the Body ground and the Plus at the Bullet Terminal with a branch from the Tachometer Wiring. From several people's installation examples, it seems that Noise is not a concern. View detail
It's not a bad thing, but that's about it.
YOSHIMURAProgress water temperature sensor is gnawed by about 5mm.
I'm really curious about the 5mm with an 18 inner diameter.
That's it.
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
I put it on anyway.
I see posts here and there that it's not very Ate.
I have Enigma on and bought it to use as a guide.
I bought a jc92 grom for Honda, but the coupler shape was different, so I modified the wiring and installed it.
I don't know how it works because it's still cold and I'm not used to it yet.
The installation was done using the existing Mirror holes and affixed to a self-made Plate.
View detail
KOSO Temperature Sensor
I purchased a M10×1.25. The Meter came with a 1/8, so it didn't fit.
The color is different from Included Parts:and it is Anodized Red, so it looks good.
View detail
KOSO Super Slim Style Meter [Extension Harness 2m]
I purchased this extension because I am installing it on a vehicle, not a motorcycle.
The Coupler system made it easy to install.
View detail
It's a little dark.
It's cheap. Installation is easy.
It is dark, so it is hard to see in bright time.
At night, it's LED so it's easy to see.
I don't know what the margin of error is, but I think it's better than the OEM about water temperature system.
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
The ct125 wasn't pimped out.
I saw some people putting it on their Grom, so I thought it might be a pimped out version of the same Engine.
I had to interrupt the Connector because it was the wrong shape, and I'm happy with the performance!
View detail
I don't need Electro Tap.
I was looking for a watch for my motorcycle because I always worry about the time when I ride my motorcycle to work, and I happened to find this watch at Webig. When the wiring is completed and the key is turned on, Digital emits light rhythmically, and it makes me feel as if I got on the latest motorcycle. The display of the voltage is also convenient. As for the installation, it is easy to do if you are a rider who knows a little about the electric system and play with motorcycle by yourself. I don't use the Electro Tap that comes with it because I feel resistance to put the wound on the harness, and I extended the wiring to the power supply system of the side cover, and I used the ACCOn line + Battery direct connection. It's not waterproof, but I don't ride in the rain, so I think it's very durable. This product is designed to be connected to harness with Electro Tap, so the LEAD wire coming out from the body is short. View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
air-fuel ratio system
'11 SUPER CUB110 (JA07) I was going to install it in the. The display was easy to read and the numbers were correct. View detail
It can be attached to the famous Temp meter
Honestly, it's been a long time coming It could work I was expecting this to be a good idea, but...sure enough, bingo
This Sensor, Yoshimura's PRO-GRESS Available for
The GSX-S/R is included in the official version of YOSHIMURA's PRO-GRESS Sensor It is a 125 DrainBolt size M10×1.25 There is no setting for the Not for sale but this guy will allow you to use it
temperature and voltage Two only Since there should be no meter (as far as I know) that can use YOSHIMURA's PRO-GRESS It would be very nice to have the
(Note:There are several meters that display temperature, voltage, and clock, but the GSX-S125 is not From the beginning "The Clock With the function of a retrofit meter "The Clock (is, in a sense, a useless feature.)
As a matter of fact, I have tried to divert the sensor from the old Bolt/Temp meter at Yoshimura before After analyzing the cause of the failure, I investigated it and found out that I can use it as a result I'm glad I understood
The border between the Connector and the Harness part is also processed by Heat Shrink Tube Yes, no problem
As for the complaints The "two-sided width of the hexagon" in relation to the bolt size diameter It's a "is a Small Sized" thing
If the selection of the gasket used is incorrect, the seal surface may not be secured and oil leakage may occur
Therefore, from the beginning, for the purpose of diversion, only Self-judgment In
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA MONKEY
I installed it in SUPER CUB110 JA10
I bought it to see how it would feel It was easy to install with the instruction manual I am not sure of the accuracy, but I think it's a good guide View detail
USB etc. SmallEngine Displacement Volume to Voltage Check at Power Supply Addition!
125 SmallEngine Displacement Volume As we added USB and auxiliary lights to the car, we will purchase Battery's voltage check for easy management!
The price is affordable, even in the case of Small while Large Kimono, Red number display and visibility is no problem at night.
Just like waterproof seems to be not so, if you set it in a sudden shower when it rains, Large is durable!
Power supply is Light and Hornetc. It seems to be retrieved with Wupping 's attached from Wiring, but because it hurts Wiring of NORMAL, it should stop NG!
I took it out of my own Extension Cord for auxiliary light.
View detail
Unexpectedly, easy!
As I had seen on some HP this time, I decided to bite Wiring of Small lamp.
Originally, it is most likely to bite into Ignition, but Wiring from Body also did not reach the Fuse box with subtle Length, so it's a connection inside Headlight that Waterproof can also do.
If you can verify that it works properly, after all confirmation during the day is painful in Red.
However, since the body is Red at V7Racer, I think that I was good enough on my own.
I will not check while driving, if there is no problem as long as I know the voltage.
View detail
For grasping the state of the Engine
As the Large type air-cooled Motorcycle, the temperature of the engine, especially in the summer, became extremely high, and it purchased and installed for the purpose of grasping the state.
As for installation, I did it myself at home Garage.
Thermometer of Engine oil (Oil Temperature Gauge) I already installed, but in some cases I got up to 130 degrees and so on, I was worried, but installed because the hydraulic pressure is more important than the temperature.
Sensor sandwiched in Element section.
Installation itself is not particularly difficult, but the problem is just a Digital meter, ○ ○ Because there is no such information as Large Yui is more numerical than Large, I also needed to study myself, like listening to OilManufacturer.
I could not get clear answer even if I contact Honda.
View detail