Reviews
Custom effect available
Can be used in exchange for OEMParts.
The texture is much better than NORMALRubber because of SiliconHose.
It can also change colors and has a custom effect.
It is necessary to do a full rose shi around the Radiator for installation.
It requires a certain amount of skill, tools, etc.
We replaced it when we did a full rose shi for maintenance of the cooling system.
The installation itself took about two hours.
View detail
Good parenthesis with the same color as the body.
CRF250L (MD47) The coolant was replaced as an incidental part of the coolant replacement of the
Compared to OEM Products, Material is Material:Silicon was also there and the product was soft and the work was precise and arrived without difficulty.
The Red Hose stands out in appearance and Parenthesis is good. (^_^)
This will allow me to ride with peace of mind for the time being.
It is softer and easier to wear than the OEM Product.
Recommendation Products
View detail
Parenthesis good!
Since the resin products are combined with each other, the assembly of the three One Side products, including the drilling process, must be done gradually and evenly, etc.
The nut on the upper side of the drilled hole is small in relation to the hole diameter, and since it is made of resin, it is better to use a washer to tighten the nut.
If you take care of that, it will fit Exactly, and the finish is Magical quality and perfect.
I am pleased with how well it matches the body of the car, which was repainted in Black Meta.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Easy installation, no need to remove Cowl
Purchased to protect and hide scratches after a bug hit the Radiator and crushed it while driving on the highway.
It was easy to install on a 22 yzf-r25 in about 5 minutes.
The texture is firm and will provide a high degree of PROTECTION.
View detail
Tightens the atmosphere around the Radiator
The OEMBolt was installed with no problems, it is SMART than the OEMGuard, and the Radiator is more secure in terms of protection. View detail
Mounted on APE
It is functioning well.
I took it out of the Cylinder and put it between the coolers, but it feels a little tight, probably due to the Sensor.
With the Rubber hose, the Band looks like a Large amount, so you may not be able to put it on if you are concerned about its appearance.
View detail
YOSHIMURAProgress2
Fixed to MeterScrew using CarbonBracket.
It fits perfectly and is perfect. Oil temperature, voltage, and clock are visible for peace of mind.
View detail
Attachment was installed using a separate Attachment.
It is attached using Attachment between RadiatorUpperHose.
There are similar products other than KOSO, and the font style of the numbers is difficult to read in the similar products.
The image is KOSO OEM Product.
OEM Product is in short supply, but we had it in stock here, so we purchased it as a spare.
View detail
high quality
I had installed it on my other car and loved the high quality, performance and design, so I had no hesitation in choosing this one.
The 1050DE was not listed as a compatible car model, but it could be installed without any problems.
I am satisfied with the Large change in terms of Radiator protection as well as appearance.
View detail
I purchased an additional temperature sensor.
Damage occurred because the mechanic was clumsy in removing the sensor. It is reusable, but I bought an extra sensor just in case. It is very nice that only the sensor is sold separately. There is no problem with the replacement as anyone can do it. In the future, when replacing an engine failure, I think it would be better to separate it myself or go to a service station. -------------------------------------------------- -------- The mechanic was damaged by the separation of the sensor. It is possible to reuse, but I did not know, so I bought an extra sensor. It is very good to sell only the sensor separately. Replacement is not a problem that anyone can do. I think it would be better to go to the stoppage by separating it directly when replacing the engine. Powered by Google Translator View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA
nice-looking
Impeccable except for the price.
When installing, it is recommended to remove and install the side cowl.
View detail
Even a beginner could install it easily.
The fit was pleasantly snug.
I was impressed with JAPAN, as expected.
View detail
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
First things first.
When you buy a new motorcycle, what do you choose as your first custom?
I am, at any rate, a Radiator guard.
This time we chose (also) Etching factory's Guard.
Very easy to install.
The high dimensional accuracy allows for a snug fit, so there are no chattering noises.
Especially for those who go to Long, you will inevitably encounter some dirt and unpaved roads under construction, but if you wear the Guard, you are guaranteed to have a beautiful memory of your trip without being disappointed later when your core collapses.
The price was also lower than YamahaOEM and generally more satisfactory.
View detail
Mounting on HORNET 250
Installed on HORNET250.
Installed to prevent stepping stones.
Chose this product because Plain was good.
It looks great and I am Large satisfied.
View detail
Recommended
I have to have this in the summer!
The temperature dropped 7°C to 10°C after installation!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
YOSHIMURA is the quintessential YOSHIMURA!
I thought it would not stand out much because of Shroud, but it has a surprisingly good presence!
It was a simple task to remove the Shroud from Both Sides and install it on the Radiator.
I am satisfied with the Large change in both product texture and design!
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI W400, KAWASAKI W650, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr X
A little place, but very satisfying.
When I first installed it, the direction was 180 degrees in the opposite direction, but after the oil warmed up, I turned it and was able to easily change the direction.
I don't know if the temperature is accurate because I'm an amateur, but the grade-up look is great☆.
View detail
Fits: Others
Easy to read numbers
TakegawaBore-Up Cylinder is installed in CUB90.
I was able to purchase this product without anxiety because it is exclusive to TakegawaCylinder.
The Plus and Minus are taken from the Coupler Wiring, which is energized by key-on, and the Minus is taken from the Frame. The panel was made by myself and attached to the Leg shield.
The SensorWire section has a linear tension. This prevents the Wiring from contacting the Cylinder, which is pointing upward and heated.
I measured and compared Cylinder temperatures with a cooking Digital meter. There was almost no error in temperature.
I have been using it for about six months after installation and it is working fine even when used in the rain.
The WhiteLED display is very easy to read. The upper Blue numbers in the photo are those of a cheap voltmeter of unknown manufacturer that we had been using for some time. Compared to this, it is much easier to read.
I thought it would be better to buy a neat Meter system even if it costs a little more.
Actually, I am more concerned about Oil temperature than Cylinder temperature. I will keep the Meter as it is and purchase a separate Oil Sensor to use for Oil management. I think it is good that you can purchase different types of sensors and extended wiring etc., so you can change it in various ways depending on the situation.
View detail
Oil Temperature Meter on MT01
It is helpful to know the oil temperature easily.
There is no Marking to see the amount of oil.
View detail
It is MORIWAKI after all.
I was wondering if I could use black for a more austere look, but I also wanted brightness, so I went with silver. If the design is good, I will stick to the reliable MORIWAKI products. View detail