Reviews
Fits: Others
Easy to read numbers
TakegawaBore-Up Cylinder is installed in CUB90.
I was able to purchase this product without anxiety because it is exclusive to TakegawaCylinder.
The Plus and Minus are taken from the Coupler Wiring, which is energized by key-on, and the Minus is taken from the Frame. The panel was made by myself and attached to the Leg shield.
The SensorWire section has a linear tension. This prevents the Wiring from contacting the Cylinder, which is pointing upward and heated.
I measured and compared Cylinder temperatures with a cooking Digital meter. There was almost no error in temperature.
I have been using it for about six months after installation and it is working fine even when used in the rain.
The WhiteLED display is very easy to read. The upper Blue numbers in the photo are those of a cheap voltmeter of unknown manufacturer that we had been using for some time. Compared to this, it is much easier to read.
I thought it would be better to buy a neat Meter system even if it costs a little more.
Actually, I am more concerned about Oil temperature than Cylinder temperature. I will keep the Meter as it is and purchase a separate Oil Sensor to use for Oil management. I think it is good that you can purchase different types of sensors and extended wiring etc., so you can change it in various ways depending on the situation.
View detail
Oil Temperature Meter on MT01
It is helpful to know the oil temperature easily.
There is no Marking to see the amount of oil.
View detail
It is MORIWAKI after all.
I was wondering if I could use black for a more austere look, but I also wanted brightness, so I went with silver. If the design is good, I will stick to the reliable MORIWAKI products. View detail
unconcernedly
I chose Black. The casualness is good.
Solidly built, no BALIetc.
I have not had it on long enough to know how durable it is.
Easy to install
Other Manufacturers are similar, so you can choose the one you want based on Cost or your favorite Manufacturer.
View detail
Mounting.
Cannot be installed as is. (Quantity:Pair (for Left and Right) The square hole for the bottom hook was too small, so I had to cut it out and install it. The checkerboard pattern also looks smaller than in the picture. I am a little disappointed because I ordered and waited for a long time. View detail
Installation on nc42 late model
Installed on nc42 late model.
The design is Parenthesis good, and I have a TSR full titanium muffler on it, so I decided to go with TSR for the Radiator core guard as well.
Installation can be done by anyone, as the work itself can be done by removing four hexagonal screws.
It is well made and I am satisfied.
View detail
Fits: TRIUMPH , TRIUMPH THRUXTON900, TRIUMPH BONNEVILLE AMERICA790, TRIUMPH SCRAMBLER, TRIUMPH BONNEVILLE T120V, TRIUMPH T100, TRIUMPH BONNEVILLE SE, TRIUMPH Thruxton, TRIUMPH AMERICA, TRIUMPH Street Twin, TRIUMPH SPEED MASTER
Guideline for oil temperature control.
BONNEVILLET120 (2018, water-cooled) I installed it in
I had a similar product on my previous W800 and it was very useful.
BONNEVILLET120 is a water-cooled Engine but installed as a guide for temperature control.
The oil filler cap is removed and replaced, but since there is no rotating object directly under the filler cap, the actual temperature will be the ambient temperature inside the crankcase rather than the oil temperature.
I do not know how much difference there is, but as mentioned above, it is a good guideline.
Because of its location, it is difficult to check while driving.
It looks Classical and fits well with BONNEVILLET 120.
View detail
To confirm oil sound
I am satisfied with the oil temperature, time, and Battery voltage management. View detail
Oil cooler fixtures
When installing the UniversalOil cooler, I wanted to install the included hose, but the One Side can only be installed by cutting the Pipe, and the companion of the included hose is a Crimp, so I tried my best to modify it, but it was impossible, so I changed the hose to a Rubber type. I tried to modify the hose but it was impossible, so I decided to change the hose to a rubber type.
I also wanted to install an oil temperature sensor on the Meter, so I bought this one after much deliberation.
We changed to HoseType, so the length and handling are now free.
It works normally
It is difficult to say "normal" because normal use is a matter of course, but the quality has to be good.
I can buy the quantity I want as a Single Item and it is Reasonable. I hope you will continue to offer products like this in the future.
View detail
I want to add oil temperature Sensor efficiently.
When installing the UniversalOil cooler, I wanted to install the included hose, but the One Side can only be installed by cutting the Pipe, and the companion of the included hose is a Crimp, so I tried my best to modify it, but it was impossible, so I changed the hose to a Rubber type. I tried to modify the hose but it was impossible, so I decided to change the hose to a rubber type.
I also wanted to install an oil temperature sensor on the Meter, so I bought this one after much deliberation.
There was also an option to cut off the rubber hose and insert it in the middle of the hose, but we decided against it due to the cost and location of fixing.
We changed to HoseType, so the length and handling are now free.
It works normally
It is difficult to say "normal" because normal use is a matter of course, but the quality has to be good.
I can buy the quantity I want as a Single Item and it is Reasonable. I hope you will continue to offer products like this in the future.
View detail
I feel safe.
As expected of YOSHIMURA, it is expensive, but the quality is good enough.
RadiatorCore is easily deformed by a little Small stone or something, so I feel safer with it on.
When actually installed, the letters YOSHIMURA seem less conspicuous than I had imagined from the photo.
View detail
sense of luxury
The color of the Stainless Steel matches the color of the car body and gives it a more luxurious feel. View detail
Essentials for a new car
I always install them when I buy a new car. This time I selected Stainless black for the 4RR because I wanted to see the difference since the 25RR had the Stainless Steel base material. View detail
Fits: SUZUKI GSX-S750, SUZUKI GSR750
This is a relief.
I didn't want to damage the Radiator, so I ordered it at the same time I bought my new car.
It is Exactly because it is exclusively made for this purpose.
I would say it is a drawback, but I have no choice...I have to remove the side cowl when installing.
It is very hard to disengage.
I had a hard time there.
It is said that the cooling performance will be reduced when the radiator guard is installed, but it is not for racing, etc.
It is Large sturdy even if you don't care about it because you are not driving on a road with no speed limit.
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Z250 (2013-), KAWASAKI Z250 (2013-)
RadiatorCore
It is easy to install and looks custom.
Unfortunately, the finish of the mounting hardware was not so good.
View detail
A-TECH's Core guard is Parenthesis good!
Little Quantity to fit the Radiator type:Pair (for Left and Right) Just angle it and replace it with 4 Bolt.
It prevents stepping stones and looks good Parenthesis!
I personally like A-TECH's Mark very much!
It was the right choice for A-TECH!
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R
There's no reason not to.
Personally, Radiator and Oil cooler guard are absolutely necessary. Without them, I don't feel safe.
The design is simple and OEM-like at a glance, and the one point I like is that the Emblem part is available in several colors.
View detail
Compatibility outside of the applicable model year
It is a 2019 and I was able to install it with no problems. View detail
WR3 Dub Lure Rusley Radiator core guard
[How is it used?
Radiator protection.
Was the one you received as per Image?
It is exactly as pictured.
Was the installation difficult?
It seems to be a good idea to remove the RadiatorTank. I did not remove the RadiatorTank.
How was your experience with it?
It is going to be protected.
[Included Parts:were they on?
Included Parts:were complete.
[Was there anything that disappointed you?
As expected
Other items that would be helpful
Point and hang of installation
I thought it would make noise if I installed it directly, so I put a RubberSpacer between the two.
View detail
Stylish logo and texture
Installed on a ZX10-R '24.
10R's Radiator guard is not available in many types, so I chose this one, but Large was correct.
I guess you could say it's Trickster.
Looking into the Radiator, the Trickster logo can be seen tucked away at the edge.
I can't say how effective it is because I just installed it, but I can rest assured that it is not a shoddy product.
My theory is that it is better to put the Radiator guard on from the beginning anyway.
It is one of the most important custom products in the world.
Glad to have found a good product.
By the way, Black is more expensive, but Silver is recommended as it stands out better.
But scratches and stains may be noticeable.
View detail