Reviews
It doesn't fit the '23 model.
It doesn't fit the '23 model.
The bottom came on, but the top doesn't fit the Size.
View detail
Required for Crank Case Cover
Hose holder is attached to Crankcase and is required when replacing KOSOCrank Case Cover. The other attachments are all gold and the same color, so 5 stars. View detail
I think it is a high quality product.
Radiator core guard is necessary because it not only protects the radiator core from dust and stones, but also makes it difficult to see mud splashes by wiping it off.
I have purchased some Reasonable overseas products, but the quality was not commensurate with the price, and even after installation, I was concerned about the fixation method.
The Etching factory's products are of high quality and the fixing method is well thought out, so I was glad to have them because they are safe and look luxurious and satisfying.
View detail
I'm very happy with it
Installation was very easy, took only 5 minutes. It looks simple, but I think it works well. There were other products available with finer grain, but I bought the OEM version and installed it myself. There is a little space at the four corners, but considering that it does not interfere with the air cooling effect, I think it is sufficient. View detail
Casually Parenthesis better.
You will be satisfied with the results you get.
Care must be taken with the Radiator Cap during installation.
Depending on the type and orientation, there may be interference. Push rivet was used to attach the front cowl. To avoid contact wear, a thin rubber plate was inserted as a cushioning material.
View detail
To replace a deteriorated and obsolete Radiator hose
This is a combination of Straight Type hose and Hose Joint Pipe and is used as a substitute for the Radiator hose, which has been discontinued and cannot be replaced.
The coolant was nearly 40 years old and had deteriorated to the point of leaking, but we were able to stop the leak by replacing it.
Although it was not possible to make it the same shape as the NORMAL, both the inlet & outlet could be made in the same position as the NORMAL, and the substitute could be made without putting a load on the hose.
View detail
Tools are required
The most difficult part is to remove the bracket from the throttle body. Once this is removed, installation is easy, Even if you have an oil temperature meter, it will not cool down without an oil cooler in summer. View detail
Easy installation OEM peace of mind
Installation was very easy.
Lightweight and thinly made.
I am not sure how good the protection effect is (so I rated it 3), but it is an OEM product and I chose it as a reassurance factor!
View detail
Polisport Radiator Shroud Set for CR125R 2001
This was a set of radiator shrouds that needed replacing for wome new ones as the old ones had a lot of damage from rocks etc. I decided on the Polisport ones as I have used them a few times before and have had good experience with this brand. The radiator shrouds were pretty good value and are cheaper than some of the other alternatives out there. With a few other parts in my order, all were shipped together to save some costs. My order was delivered by EMS and took 5 days to arrive. The shrouds arrived in the Polisport packaging and were surrounded in buibble wrap to keepo them from sustaining damage in transit. The shrouds are made from a strong plastic material and are pretty robust and strong. There is a bit of flexibility so you can sit them fairly easily. I would recommend this brand for off road bike body work as they are cheap enough and last a while. The quality is really good and I found no flaws at all. Very pleased after fitting and the bike looks a lot more appealing now. Thanks Webike. View detail
Large Satisfied
Since the oil cooler for Harley-Davidson does not have a horizontal type mount type, we fabricated a mounting bracket and installed this oil cooler. The oil cooler was installed on the front frame in front of the engine through the aforementioned bracket so as not to interfere with the front fork and not to obstruct the foot space. It was installed quite nicely. View detail
These are parts that are recommended to be replaced periodically rather than becoming a troublemaker due to motorcycle malfunctions.
The story of the phenomenon to the replacement of parts
When I was riding in the city, Stop and go repeatedly in winter, the temperature of the water temperature gauge exploded.
Normally, the temperature would start at 100°C and then rise to 105°C with the cooling fan running, but the temperature has now hit 110°C. The cooling system warning lamp comes on... I don't understand! Finally, the warning lamp for the cooling system comes on... I don't understand why!
Cool-down at normal speed with running wind, warning Lamp off, temperature suddenly drops below 100°C, and cooling fan stops.
When waiting at a traffic light, the water temperature gauge rises and exceeds 100°C!
Later, upon inspection, the coolant reserver tank was replenished to the upperLevel based on its depletion.
The next day, I found some kind of liquid leaking from the bottom of my parked Motorcycle! The next day, we found some kind of liquid leaking from the bottom of the parked motorcycle!
It did not look or feel sticky like oil, it did not smell like volatile organic compounds, and it felt watery…, so I suspected it was coolant!
Not a leak from the Oil pan? I guessed it is probably draining from the Overflow Pipe.
I couldn't be sure because I haven't seen the phenomenon….
Every so often, the stain under the Motorcycle, which was left on the bicycle parking lot, evaporated or disappeared without a trace.
A few days later, we see the same phenomenon again.
Even though the Motorcycle is not running, it is leaking, isn't it? Is it a mystery in your head?
I sought out what I could do on my own and arrived at, Radiator cap This is an exchange of
[How is it used?
I bought an inexpensive Other Brand Product because I don't think it has been replaced since Motorcycle purchase.
Was the one you received as per Image?
The item was exactly as shown in the picture.
Was the installation difficult?
Only remove and install the panel on the Right Side of the Front.
I wonder if it is an individual difference of the Radiator cap, but when I install it and turn it, it is so hard that I cannot turn it without using a tool.
How was your experience with it?
Compared to OEM products, other brand products are cheaper, but the quality and materials of the products are cheaper.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
The point where installation could not be done easily.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Instruction manuals are available for reference, such as no service manuals.
Might be difficult without a certain level of knowledge and skill?
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
Parenthesis is a uniquely chic design!
[How is it used?
In addition to MORIWAKI, YOSHIMURA, K−FACTORY, Etching factory, AGRAS, and other companies have released oil cooler core guards, but we chose this black one to match the MORIWAKI muffler.
Was the one you received as per Image?
Black shines duller than Image and has a gun metallic look to it, Parenthesis is great!
Was the installation difficult?
It may be a little tricky at first, but it is relatively easy to install after removing the rubber bushing on the oil cooler side.
How was your experience with it?
At a quick glance, it looks NORMAL and unobtrusive, but if you look closely, you can see MORIWAKI, which is a good example of casual customization.
[Included Parts:were they on?
In addition to the Instruction Manual, a complete set of washers, screws, etc. are also available.:Set
Also included is a MORIWAKISticker.
[Was there anything that disappointed you?
The price point is a little high, making it difficult to afford.
Even the screws and ribs are painted black, making it a very special item. It is a perfect part without any complaints because of its high price.
View detail
Fits: KAWASAKI Z900, KAWASAKI Ninja1000SX, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Core guard with a good, understated claim!
Easy to install! Very good product in color and design! View detail
fast delivery, nice quality
It allows you to know the temperature of the engine oil indirectly There are variations in accuracy But it goes well with the bike and is pretty View detail
To repair engine oil leak
Already "Old car" I have a Live Dio (clog scooter) that is running fine, but it is leaking oil, which is a promise of 2CycleMotorcycle, … In such a case, this product can repair the OilLevelSensor without replacing it with a new one! It is a recommendation! View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS Yellow Ball Edition
Large Satisfied
The product is better than expected, no Speed complaints. View detail
![[Repair Parts for Big Radiator] Universal Radiator Core Body](https://img.webike-cdn.net/catalogue/10955/5050003_TS.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200, YAMAHA V-MAX
Careful
Big radiator kit was already installed, but this time I purchased only Core for water leakage from Radiator, but … It seems that the Model change was done in the direction of Mr. Active, the fan bracket and Core guard were also changed in size. It was. I should have purchased it with Kit from the beginning, Camouflage…I have no complaints about the product itself, but.... View detail
Just fit like OEM Product
I purchased again this time.
It is mechanical and looks great on the air-cooled CB1100. It is not accurate, but it allows you to check the degree of oil temperature rise and has the effect of preventing overheat in the summer,
View detail
Replacement from OEM Product
I replaced the OEMCap that was too assertive for my Black vehicle with this one. It is not a compatible car model, but … I was able to install it without any problems.
I haven't driven the car since it was installed, but I'm happy to say that it looks exactly how I expected it to look with the uniformity of the Black color.
View detail
Yoshimura Radiator Guard
As expected, Yoshimura and Suzuki are a perfect match.
I've wanted it for a long time, and I'm so glad I finally bought it.
The finish itself is very luxurious and sophisticated.
The price is quite expensive, but I think it is an item that makes the bike more stylish.
I recommend to anyone considering purchasing.
-------------------------------------------------- -------- As expected, Yoshimura and Suzuki are a perfect match. I've wanted it for a long time, and I'm so glad I finally bought it. The finish itself is very luxurious and sophisticated. The price is quite expensive, but I think it is an item that makes the bike more stylish. I recommend to anyone considering purchasing. Powered by Google Translator
View detail