Reviews
It was easy to install
Installation was easy.
It also looks better.
I wish the price was lower.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Ninja1000SX
EVA racing
Good radiator protection and very nice looking piece. I got the Evangelion version as I am a fan of the series. A little expensive but worth it. View detail
Simple and good.
I think this is a good product for a Simple and Custom feel with a Core standard.
I had this one on my previous Motorcycle, so I chose this one again.
However, it would be better if it were cheaper….
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
Expensive but satisfactory
I feel safer with it on and am happy with the way it looks. View detail
With a little work, it could be installed even with Cowl installed.
Radiator core guard on ZX-6R with no Option setting in OEM
Since it was a new car, we wanted to install it while it was new, so we selected Trickster's product, which was one of the first to offer compatibility with the 24-year model.
I was wondering if it was that large since it arrived from Webike in 120Size. I wondered if it was that big, but it was mostly packing material (laugh).
We believe that the curved RadiatorCore is designed to fit the curved RadiatorCore so that it does not deform due to its easy bending.
Thank you very much.?
The Instruction Manual says to remove the cowl, but I read in a past review that it can be installed without removing the cowl, so I decided to take the challenge.
When I applied it with the packing material still attached, it looked like I could manage without removing the cowl, but the Horn was in the way of hooking the upper three claws to the top of the RadiatorCore, so I removed it, removed the packing material, and installed it without problems.
However, it may be tough to remove and install the Horn and the lower OEM mounting bolt without a tool that can be applied force even in a tight space.
Also, please note that there is still a possibility of scratching the Cowl and Front Fender.
Too bad it doesn't stand out much on Full Cowl cars when installed.
View detail
Easy installation and dress-up effect
Installation should be very easy.
The Instruction Manual was so simple that it was misinterpreted and installed incorrectly, so we had to start over.
It is not usually a place to look closely, but there was a spot where the Core had been crushed after about 1,000 km of driving.
I regret not putting it on sooner.
The screws on the underside of the guard are difficult to reach, so it is better to close the guard with the Glasses than with the Ratchet.
View detail
Tightens the atmosphere around the Radiator
The OEMBolt was installed with no problems, it is SMART than the OEMGuard, and the Radiator is more secure in terms of protection. View detail
Compatibility outside of the applicable model year
It is a 2019 and I was able to install it with no problems. View detail
Stylish logo and texture
Installed on a ZX10-R '24.
10R's Radiator guard is not available in many types, so I chose this one, but Large was correct.
I guess you could say it's Trickster.
Looking into the Radiator, the Trickster logo can be seen tucked away at the edge.
I can't say how effective it is because I just installed it, but I can rest assured that it is not a shoddy product.
My theory is that it is better to put the Radiator guard on from the beginning anyway.
It is one of the most important custom products in the world.
Glad to have found a good product.
By the way, Black is more expensive, but Silver is recommended as it stands out better.
But scratches and stains may be noticeable.
View detail
Attractive and Light
The product is mainly an aesthetic mod. Its quite expensive for its size. Build quality is very good. No hose clips were provided. Install is straight forward. Good to plan with Samco hose upgrade and coolant replacement cycle. View detail
Attractive and light
The product is mainly an aesthetic mod. Its quite expensive for its size. Built quality is very good. No hose clips were provided. View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900
Custom
I chose this Manufacturer because it is Cool out of many. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
I was told by an acquaintance that I should install a radiator guard.
[How is it used?
Purchased with 500km on the odometer.
Was the one you received as per Image?
Simple and good.
How was your experience with it?
I think this is good because the fins are not directly hit by splashing stones, insects, etc.
[Points to note]
If you don't want to put a Cowl, etc. with a Wound, etc., you might want to ask someone who knows what they are doing.
How did it compare to other products?
I have not seen other products, so I don't know about rigidity, etc., but I bought it this time because I saw it in Simple and the mesh was fine.
Point and hang of installation
I installed it myself without removing the cowl, etc. I think it took about 10 minutes if I followed the instruction manual.
As others have mentioned, if you do not want to put Wound on Body, etc., we recommend that you ask a knowledgeable person to do so.
View detail
Fits: KAWASAKI Ninja H2R, KAWASAKI Ninja H2, KAWASAKI Ninja H2 SX, KAWASAKI Z H2, KAWASAKI Ninja H2 SX +
Mounting Large may be strange.
I thought about attaching it myself, but I would have to remove the cowl and pass it through the gap between the Horn and the Radiator fins, which would cause scratches and bump the Radiator fins as well,
I am going to pay the place I bought Body to put it on for a labor charge.
View detail
TRICKSTAR Trickster Radiator core guard Black Plating
I was hesitant to buy it because I felt it was expensive, but once I bought it, I was satisfied. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI VERSYS1000
Trickster Radiator core guard
I was not sure whether to choose Silver or Black until the very end. In the end, I decided to go with Silver, but the part that used to be pure Black is now Silver. A Sense of Change." Silver will be Accent, and Black will look natural, so you can't go wrong with either (your choice). View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900
inconspicuous
Black Plating for a nice, unobtrusive look. View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Purchased for the Radiator guard.
I was not sure whether to buy OEMGuard or not and decided to buy from Trickster.
I decided on Trickster's product because, as others have mentioned, the back of the Tire had a fine eye.
The installation was easy to follow the instruction manual and I was able to install it without removing the cowl and without scratching it.
Although it is an inconspicuous part, I think it is recommended for those who want to drive their beloved cars with a large cutting edge.
View detail
Change from OEM
This is a change from OEMCore guard.
It looks nice, but the grain is finer than OEM, so we will have to wait and see how the cooling effect will be.
It would be even better if the price were lower.
View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900
Z900Custom
Installation was easy.
The fit is good and I like it very much.
View detail