Reviews
Recommended
I have to have this in the summer!
The temperature dropped 7°C to 10°C after installation!
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
Oil Temperature Gauge Stick Type (CROSS CUBJA45)
It has been almost 6 months since I purchased it.
Can be used interchangeably with OEM Oil Dip Stick.
The intake and exhaust system is NORMAL, so temperature control is not necessary, but it is just right for a little custom.
In the winter, the temperature was 60°C, and the other day, when the temperature was 36°C, it was up to 100°C.
The amount of engine oil is the same as the OEM length, so the amount of oil can be controlled when changing oil.
I think it's good
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
temperature is good
I was curious about the temperature of the oil inside the engine of my motorcycle. It was possible to check it when riding a high-performance motorcycle, but it was impossible to check it on the motorcycle I ride now, so I needed this and I think I bought it for that purpose rather than for decoration purposes. View detail
Fits: HONDA APE 100, HONDA APE 50
Processing Required
I've used it on two vehicles, XZ50-9 FI Vehicles and XZ100-8 Carburetor Vehicles.
Both car models required machining to cut this product.
in my case
FI Vehicles
Where it hits the PumpUnitMounting Bolt section on the Left Side.
Carburetor Vehicles
Where it hits the carburetor on the Right Side.
Where it hits Wiring at the bottom of the Left Side
Old Ryobi electric sandpaper was used.
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
good
honda super cub C125 (JA58 / 2022) It is firmly attached without any problem. There is no problem in checking the amount of oil like a conventional deep stick. I'm not sure why there is a gauge liquid (oil ???). It is nice to be able to switch the direction of the gauge. View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
It takes much longer than the delivery time stated on the delivery method.
It was written that it would take 4-6 days to deliver the product at an expensive shipping cost.
It actually took 10 days to arrive.
Shipping takes the worst time.
However, although the product is for the Monkey 125, it fits the 2022 Super Cub 110 well. ------------------------------------------------------------ -------- It was written that it would take 4-6 days for the expensive shipping cost and shipping, but it took about 10 days to arrive.
Delivery takes the worst. Powered by Google Translator
View detail
MINIMOTO Oil cooler 3-stage Core
old car DAX." Used for
The 3-stage core was selected to make it more compact, and the cover was removed and installed. The nipple on the outlet was replaced with a banjo bolt to refresh the piping. The banjo bolt that comes with the unit is not strong enough, so be careful with the torque. I think the performance of this product is comparable to other expensive products, and it is a good and inexpensive product.
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
It is a very good product. It's a very good product
Fits the Super Cub 110 model very well. It was good to save points with only one oil thermometer, and to be able to purchase it at a very reasonable price. It fits the Super Cub 110 model very well. It's good to accentuate the point with just one thermometer It was nice to be able to buy it at a very reasonable price. View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
Good
It's for Monkey 125 It fits well for the 2022 super cub. I like it very much but the shipping cost is too expensive. But I like it, I understand View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
CG125 (SDH125-7D) Exactly to
It is very elegantly built and easy to use, and the oil temperature is easy to read.
I am satisfied with the Large change in the state of installation, but in terms of the Dip stick functionality, I am not satisfied with the Dip stick.
It is about 10mm longer than OEM, so it is less accurate.
Well, I think that's just because it's a Universal Product, and I don't have a choice.
If you know where you are relative to the OEM Product, you can get the product to the OEM Product without any problems.
The amount of information on temperature conditions was more than enough to make the use of the system worthwhile.
I look forward to seeing how well it works in the future.
View detail
Fits: Others Product ID 0311 Loncin 125cc, Product ID 0313 Loncin 125cc, Product
I put it on my CROSS CUBJA45.
The oil level is measured properly, and there is no need to take out the OEM when changing oil. I was concerned about the oil temperature of the engine that was bored up, but I was relieved that it was not a problem. It was out of stock for a while, but I was happy to see it back on sale. View detail
CHALY-110cc
When I changed the Crank from 88cc to 110cc with a Crank change, it started to heat up.
No wonder.
For the time being, I'm going to see how it's installed on the SIDE.
Honestly, the look and feel is priceless.
Am I the only one who thinks this cheesiness suits CHALY-.
View detail
MINIMOTO 12V MONKEY Oil Cooler
The item that you will actually receive is similar to the one shown on BT, except that it has been professionally modify and cutout to fit the 72cc engine. This modification does not effect its overall looks or performance, the cooler does drop the oil temperature by at least 10 degree, which might not sound like a lot, but every degree helps to keep your bike cooler. The cooler was shipped and received quickly without any issues. I highly recommend this product and seller. View detail
I attached it to CB 125K
This time, it installed in CB 125K.
Since it is an old car, I was worried about the pressure of Oil pump so I chose a Compact item. It is unknown whether the heat sag has been eliminated, but when I ran over the pass for about an hour, the surface temperature of Oil cooler is about 80 ° C and the temperature of Oil is about 100 ° C so I think that the effect is good. It might be good even if I got a little big Large.
View detail
Small Shime Oil cooler
Small awning Oil cooler to lose sense of attaching
I purchased it
I knew it after installation
APE is a little large-grained because Oil flow is bad
Know that it will not get cold if it's Oil cooler
I feel a little regretted in terms of performance but it looks like
It is a good feeling..
4 LMONKEY 88 c also has the same thing.
This is functional enough also enough clearly
I am satisfied..
View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA GORILLA
Let it cool down from the outlet.
Purchased to attach Oil cooler to a solo car.
If anything is cool it is good.
Loose at first sight of Design.
The atmosphere coincided with the head cover of KIJIMA.
Expecting the cooling effect even if the fins are large.
M10P1 separately for installation. 25 Banjo is required separately.
View detail
[a Webike Monitor] -- liking to carry out the Oil cooler under Wright -- purchase -- in my case, if it was processed since it was an external Stainless, but it is a direction of the (past [ a before ] -- low -- since it elapsed and came
[a Webike Monitor] -- liking to carry out the
Oil cooler under Wright -- purchase
-- in my case,
if it was processed since it was an external Stainless, but it is a direction of the
(past [ a before ] -- low -- since it elapsed and came out and carried out) Normal fork -- a STAINLESS STEEL --
-- since it is beautiful and strong, I think whether it is good
View detail
By the product made from a STAINLESS STEEL, to rust, he thought that it was safe and it purchased. Since several millimeters did not suit but processing was needed, I was allowed to use four stars, although it was if the attachment Pitch of the Norma
By the product made from a STAINLESS STEEL, to rust, he thought that it was safe and it purchased.
Since several millimeters did not suit but processing was needed, I was allowed to use four stars, although it was if the attachment Pitch of the
Normal fender is suited.
and others are perfect.
View detail
Individually, it is satisfactory. If it is structure satisfying to those who want to raise at a low price although it is not so good too compared with the same goods of the other company since the price is a price?
Individually, it is satisfactory.
If it is structure satisfying to those who want to raise at a low price although it is not so good too compared with the same goods of the other company since the
price is a price?
View detail
Fits: HONDA APE 100, HONDA APE 50
It contacts, although attached for the ape 100. It is a cover of injection specification. It processed and attached according to the pure cover.
It contacts, although attached for the ape 100.
It is a cover of injection specification.
It processed and attached according to the pure cover.
View detail