Reviews
Fits: HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR
K-factory radiator core guard
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View detail
After Fire can be found at ??
I was worried that the muffler silencer would break because I had changed the exhaust system to an over exhaust system and it was catching fire after the fire. The secondary air can now be cancelled, and the After Fire has almost completely stopped. View detail
For AfterFireA and Embrace measures
I was looking for a product that would alleviate some of the tightness of the embellishments.
YZF-R25 2023 replaced by YZF-R25 2023.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's easy, as long as you have the right tools.
How was your experience with it?
Obviously, the embrasure and AfterFireA have been reduced.
[Included Parts:were they on?
Instruction Manual and complete set of Parts.
If you are having problems with AfterFireA and Embrace, try it anyway, it is a Recommendation product because it will expand your world.
View detail
Beautiful browning
I recommend it because of its beautiful baking color and rust-free. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Beautiful browning
The product did not arrive as Manufacturer did not seem to have it in stock, but the product is a good one.
Note that the O-ring protrudes from the car body when installed, making it difficult to insert the O-ring.
View detail
Fits: KAWASAKI NINJA ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Reliable KFACTORY
I had already installed KFACTORY on my other car, so I was comfortable with the purchase!
It was installed by simply removing the Lower cowl.
The middle of the 1stSmall stone is rolled up in a fine mesh, making it very effective in preventing stones.
I can go Touring with peace of mind!
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Looks like a ____.
Since the HeadOil line is replaced with Stainless Mesh backed by Other Brand Product, I bought it to match the color of the Hose.
Also, I am satisfied with the DURACON Black because it matches the Cylinder color and Bolt Titaniumium gold because it matches the Exhaust System color.
However, I understand that Cut-outParts are expensive, but I would be more satisfied if they were less than 20,000.
Note that two crash washers for FittingBody and two O-rings for Bolt are included, but two crash washers for Oil line Bolt are not included and must be prepared separately.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
OEM is a thin steel plate
I can't evaluate the cornering, etc. because I don't run on circuits, but the aluminum cut-outs increase the rigidity, so the GEAR of the mission is clearly improved and it gives a tight feeling. After replacing the aluminum cut-outs, you will feel even better if you replace the oil with a good oil. (In my case, it's New TEC.) I am glad that I replaced it because I now feel more relaxed even if my pace is faster than usual when I am driving on a mountain pass. (I'm sure it's having a positive effect on the body and suspension.) You can recommend it. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZZR1100, KAWASAKI ZZR1200, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1100, KAWASAKI ZZR1100
GOOD than OEM
The construction is good and looks GOOD, but be careful about tightening Torque as it seems to use Aluminum! View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Cumbersome to work with
After the secondary air cancellation plate was installed and the Axel was removed, it became difficult to fire afterwards. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R, KAWASAKI ZX-12R, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI NINJA250R, KAWASAKI Z250, KAWASAKI NINJA250, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI ZRX1200, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI NINJA ZX-14R, KAWASAKI Z1000, SUZUKI GSX1100S KATANA, KAWASAKI ZEPHYR750
Large Satisfied!
Mounted on ZrX1100
Before purchasing the cap, I was worried that it would stand out from the clutch cover, but when I actually installed it, I found it integrated with the clutch cover without any discomfort. It is a very beautiful product and I like it very much, although I have to be careful to protect my tools when I remove the cap for oil changes, etc.
The price is high for a Cap, but it is easily customizable, so I think it is cosmetically good.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1100, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
self-satisfaction
I didn't have a tool to tighten it, so I fixed it with Wiring.
It is a more self-satisfied area.
View detail
Fits: KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200
Refreshing and good to put together.
The price is a little high, but it looks Refreshing and put together very well.
Another good point is that Washer and Bolt can be used without modification by the OEM.
View detail
very good
The product is very good. Installation can be done in about an hour with knowledge. After installation, the footpeg area is refreshing and good. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Buy peace of mind!
OEM is PelePera steel plate. If this is cut out of aluminum alloy gold, the rigidity will be increased.
Quantity that mounts the back end of the Engine to the Frame.:The 2-pc bolt is made of steel (OEM is probably S45C), but if it is made of SCM and the steel plate becomes a Bulk, the rigidity of the bolt will increase.
However, although the rigidity is increased by using SCM material, the toughness is sacrificed in exchange for it, resulting in a decrease in tenacity. Since the rupture will come all at once, it is recommended to use the SCM material when driving in a circuit or under intense load. Bang!" and may result in a rupture.
Well, I decided to install the Large because I don't drive that hard, so I thought it would be sturdy.
The front and rear axle shafts, pivot shaft, and this area are now made of SCM material, so the chassis is now very stiff. This can be felt at the Level of handling.
View detail
No rust in the piping!
OEM Steel piping rusts even if you have WAKOS Heatbu Lock plus in it. This may be due to the fact that they are steel pipes, but it is unacceptable.
I can't believe Rust is going GRUGRU around the coolant path.
However, Titanium piping has nothing to do with rust. After all, it forms a passive film on the surface, so it does not rust.
It's lightweight, and the Titanium baking color gives it a beautiful glimpse when you look into it.
I will protect my beloved machine! I saved up and bought it with this strong conviction alone.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Recommended if you are concerned about AfterFire Ya
AfterFireYa noise is recommended for those who are concerned about the exhaust Gas regulation at the time of vehicle inspection. [Color] Clear is not possible. Therefore, I do not recommend it to those who think it is time-consuming to remove and install it for each vehicle inspection. View detail
Not associated with corrosion in piping
OEM Steel piping inevitably rusts and corrodes inside. This rust was unacceptable, so we decided to convert to titanium.
Whenever you say "hang" in the installation, ORing [Silicone grease]. Apply a thin coat of "PEEK" before assembling!
This is about it.
If the O-ring is coated with silicone grease, the O-ring will enter the cylinder block easily without getting stuck. If the O-ring is inserted without applying the grease, the O-ring may be damaged (I have experienced this in the past).
This is such a relief to know that the piping will not rust, that the rust will not eat into the rubber hose, and that it will not damage the water jacket.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Product Usage
Very good product, KFACTORY's products are very well made! View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI KATANA, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1100, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
self-satisfaction
No one will notice it, so it is an area of self-satisfaction. K-factory's products are expensive, but I feel the beauty of modeling in their products. View detail