Reviews
It's a hassle to search and ask for help! For those who want to
In the overhaul of SEROW225, I disassembled the upper waist, so I needed a whole set of Gasket.
I thought that OEM is the best in terms of quality, but if I accumulate a lot of intentions, it will cost a certain amount of gold, and there were some parts that I was not sure whether to change or not, so if I can replace all of them at this price, it is easy.
The quality of the product is absolutely fine. It is totally usable.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Ninja1000SX, KAWASAKI VERSYS 1000
Replacement is easy.
ninja1000 is a Quantity:Pair (for Left and Right) Remove the Upper Cowl of the BoltQuantity before Tank:Remove the 2pcs and lift it up to reveal the air cleaner box. Next, remove the screws around the box with a Phillips screwdriver and remove the lid to replace the air filter. This filter is just fit like the OEM one. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII
Oil leak in the Tachometer port of the MKII.
I purchased this oil seal because I was experiencing oil leakage from the Tachometer port on my Z1000MKII. I have had the motorcycle for 5 years and the shop had replaced the oil seal with the same product made by PMC before I bought the bike. I wish I could have purchased those parts and repaired it at a lower price. I wish We-Big would sell repair parts for ORing and Oil seal. 。 I would like to buy OEM Parts next time to see if the ORing and Oil seal from KawasakiOEM Parts will work. View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA DAX, HONDA CD50
GORILLA
Street driving is much easier now. National highways are no problem.
But not the highest speed.
Next up is a five-speed.
View detail
Fits: HONDA CRF1000L, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRM250AR, HONDA CT125, HONDA TRAIL125, HONDA TRX450RX, KAWASAKI D-TRACKER X, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS650, SUZUKI V-STORM1000
I still feel safer with the Bolt stop.
OEM Cap." Than Screw bolt." looks better. It also provides some Prank protection. I also put a Plastic bolt cap on mine.
It goes on the 2023 CRF250RLY50MD47 with no problem.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-Strom 650, SUZUKI V-Strom 650 XT
Dare Standard Plug BP5HA
It is replaced at 6 years and 20,000 km.
I was hesitating between Windshield IRIDIUM and Standard Plug BP5HA, but I dared to go with Standard Plug BP5HA.
There is a Gap in the poof.
I can't rely on the burn because of Injection, but Plug is already delirious.
Especially, Sub plug (SV650X has a Plug on the Head with a Quantity:2pc. Set at a time) had soot stuck to both the front and rear sides.
Is this how it's supposed to be? I don't know.
Last time vehicle was inspected (10000 km traveled) I didn't replace them with beans because I thought they were not expensive, but I thought I would replace them with Malu beans next time.
I noticed that the Radiator was distorted when I was replacing it. It seems that it had been hit by the ground when it was standing on the ground.
I was wondering why the Oil cooler fan was making strange contact with the Head.
The Radiator guard I bought occasionally cannot be installed! It's defective! Your Radiator may be distorted!
View detail
Easy installation OEM peace of mind
Installation was very easy.
Lightweight and thinly made.
I am not sure how good the protection effect is (so I rated it 3), but it is an OEM product and I chose it as a reassurance factor!
View detail
Fits: KAWASAKI Z900, KAWASAKI Ninja1000SX, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Core guard with a good, understated claim!
Easy to install! Very good product in color and design! View detail
Installed on ADV160
Installed on ADV160.
We knew the effect of Universal's One-Way Valve on CROSSCUB110, but we wondered how it would work on Scooter and tried to install it.
The CUB was more noticeable in the reduction of the embitterment, the revs were lighter at higher RPMs, and fuel economy is yet to be seen.
In general, the CUB was more hesitant to show its effects.
Installation on the ADV160 can be done by hand through the gap, so it should take no more than 10 minutes.
View detail
Fits: KAWASAKI ER-4n, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 400, KAWASAKI NInja400R, KAWASAKI VERSYS1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
economical
I bought the Oil Filter ahead of time because I will be replacing the Oil Filter at the next Oil change.
It is a great value and helps because it comes with the necessary Packing in addition to the Filter and you don't have to buy more.
If there are no problems after using it, I would buy it again.
View detail
Fits: YAMAHA Dio bore up vehicle, YAMAHA Gyro Bore Up Vehicle
Used for repairs.
Clip went out and Cylinder scratched, and since it was so hard to find, Bore up.
The NORMAL Head hits, so replace it with this one.
It works fine
Full acceleration has not been done, so future endurance is unknown.
So far I am satisfied.
I guess I'm not happy with the changing length of Plug.
View detail
Fits: HONDA LEAD125, HONDA PCX e:HEV, HONDA PCX125, HONDA PCX160, HONDA ADV160
Mounted on PCX JK05
Installation after the PCX has been broken in for a new car.
Compared to the Normal plug, there was no drastic change, but only a slight increase in Torque.
This, too, may be so obvious that you can't tell unless you are aware of it.
So I would like to expect fuel economy.
The Normal plug is replaced at 5000 km and the DXPlug at 10,000 km, so the replacement work is reduced.
If you have the tools, you can easily replace the plug.
I would like to Repeat for now.
View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Idling stabilized?
I changed the oil as part of maintenance, and it seems to have stabilized the idling, but I don't feel that the power is increased. I really don't know if the period to change the oil was too short and the oil was not so deteriorated, but it is an old motorcycle and I will replace the oil as soon as possible. Next time I will buy a Torque wrench and tighten it with the specified Torque. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-STROM250SX, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 G8, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125LIMITED, SUZUKI VECSTAR125, SUZUKI VECSTAR150, SUZUKI GEMMA250, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type SS, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Basic
safety
The product is a Replace product from a well-known manufacturer, and of course, there were no defects.
It is often cheaper than OEM or in stock, so it would be good in that case.
Personally, OEM Product is the best, but Foot Motorcycle uses this one.
View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R750, HONDA CB1000 SF, HONDA CB400SF, HONDA X4, HONDA CBR1100XX SUPERBLACKBIRD [Super Blackbird]., HONDA CBR900RR FIRE BLADE [Fireblade]., YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJR400, YAMAHA FJ1200, YAMAHA FJ1100, YAMAHA XS1100, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, SUZUKI GS1000, SUZUKI GS750, SUZUKI GSX1100, SUZUKI GSX750
Just cover it!
Funnel is bad for the engine and does not pass vehicle inspections. The RAMAIRSystem is a simple system that can be installed on the engine, and it is easier to remove than the Power Filter, so if you want to change to a funnel, you can easily remove it. View detail
OilRoute partially changed Custom
We have installed Cam Screw together with Camshaft ChainBypassKit at the same time, and by changing a part of OilRoute, we have been able to increase Torque at low to mid speed range as well as improve Throttle I feel that the throttle response has improved as well as the Torque up at low to mid speeds. The hose length can be adjusted to your preference, I used it as it is and added a Colgate Tube to the hose for protection. It is fun to customize the Ideas to your own taste, isn't it? View detail
Fitting quality
We have now installed all the cooling fins from the first to the third level. The installation is very good, and the fitting to the SR is so well made that we thought it was OEM. I bought it this year to prevent heat leakage in summer, but in the past, oil temperature has risen up to 100℃ during summer touring. I am reporting the effect on the cooling fins with high expectations. We also considered using an oil cooler, but considering the concern about over-cooling during the winter, we decided to go with the cooling fin system. I would like to continue to enjoy my motorcycle life in the future. View detail
Satisfied
The Jet needle shape was different from the OEM one, but it worked normally. View detail
Pilot Jet
I don't know, I haven't completed setting yet.
The response was fast and helpful.
View detail
Fits: SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII (LETS Two), SUZUKI LetsII COMBINATION BRAKE (LETS Two Combination brakes), SUZUKI LetsII Standard (LETS Two Standard), SUZUKI LetsII Standard (LETS Two Standard), SUZUKI LetsIIG (LETS Two G), SUZUKI LetsIIG (LETS Two G), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI LetsIIS (LETS Two S), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ)
perfectly
Quality that can be called OEM Product View detail