Reviews
Fits: HONDA XR400R, HONDA GB500, HONDA FMX650, HONDA XR650, HONDA GB400, HONDA CBX250RS, HONDA CBX250RS, HONDA GB400, HONDA GB400, HONDA GB400, KAWASAKI KX450F, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN
Thank goodness it's readily available.
I used KIJIMA oil for replacing the oil in my KLX230R. I bought KIJIMA oil because it takes a long time to deliver OEM products and they are often more expensive than the Replacements. I was able to replace the oil without any problems. View detail
Installed on GSX1100S KATANA
I bought it because of its simple shape and size. There is no drain outlet, but this is not a problem because it needs to be removed to discharge. View detail
Very convenient!
I purchased the Tank when reviving it after more than 10 years of neglect, as I had many opportunities to take it off and on.
In conclusion, when you detach and detach the hose of Gasoline, there is no dribble of Gasoline and no damage to the hose.
It is very convenient to remove Joint with one hand.
Motorcycles, which rarely have the opportunity to remove and install the tank, may also have hardened fuel hoses,
I am considering installing it on my other Motorcycle as it seems cost effective.
View detail
Nice little piece
This line cover is nicely manufactured. It does not include a gasket. I was able to re use my original just fine. I don't think this does anything for the cooling but it looks cool. I like the air cooled look. View detail
Fits: HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub]., HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub].
Well, it's usable.
I was worried that the Breather part would break, but Large was sturdy. I am concerned about the appropriateness of the packaging of the product. It is bulging because it was put in forcibly. View detail
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
Used between Tank and FerCook in RENAISSA
The Lever is unexpectedly heavy, making it difficult to operate with one hand.
No fuel leaks or other problems have occurred, so it is ready for use.
View detail
RZ250 Fuerre Hose replacement
When the RZ250's Fuel Hose routing was changed, the Hose was also replaced.
I have been using KIJIMA's Hose for some time.
The last time I replaced the hose, I used KITACO's hose because of its imechain and price, but the hose hardened unexpectedly quickly and was hard to work with when removing and reinstalling the hose.
I still value workability, so I returned to KIJIMA.
The hose is flexible and easy to work with. It is also nice that it does not harden easily.
Home center sells a similar Pink hose, but it is not similar to KIJIMA's.
I recommend KIJIMA's Hose, don't just jump on it because it is cheap.
The drawback is that it is too soft, and if the bending radius is too small or too much force is applied, the hose will bend.
Even if the motor is large and sturdy when installed, it may break due to vibration when the motorcycle is actually running, and if it does break, the fuel supply may not be able to keep up and the motor may stop without gas.
If you want to make small bends, you can use a two-layered black hose.
View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Satisfied
I think I bought it very cheaply. There are several types of Monkey 125 oil filters, and this is the cheapest.
It is a consumable item anyway, and the more you buy, the more you will benefit.
I am very satisfied because I was able to purchase it much cheaper than in Korea.
I plan to use it again next time. -------------------------------------------------- -------- I think it's very cheap. There are several types of Monkey 125 oil filters, the cheapest price. Anyway, it's a consumable, the more you buy it. It is very satisfactory because it can be purchased much cheaper than in Korea. I will use it again next time. Powered by Google Translator
View detail
Fits: HONDA monkey, HONDA CUB90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA SUPER CUB70, HONDA BENLY50CD90
I wanted to create a sense of unity.
[How is it used?
We purchased the LITTLE CUB in the process of acquiring a long-abandoned LITTLE CUB and performing maintenance&Restore.
When replacing the footpeg rubber, the same KIJIMA Brown was used. Let's unify Starter kick's Rubber with Brown as well." The replacement was made from an OEM product that had not aged at all, and it was a completely appearance-oriented custom.
Did you receive the item as per the Image?
The color of the Footpeg Rubber and the Footpeg Rubber is also consistent with the same manufacturer's product, and I am pleased to see that the lower body of the LITTLE CUB is now more consistent.
Was it difficult to install?
It is less difficult, but slightly more cumbersome.
Insert a thin slotted screwdriver between the rubber and the KICK, spray an appropriate amount of oil spray or parts cleaner for lubrication, and pull it out with some force.
When installing the product, please follow the reverse procedure for Large sturdiness. Spray Parts Cleaner inside the tubular product and hurry to insert it before it evaporates.
It may be easier to work in the summer than in the winter when the temperature drops and the rubber becomes hard. (In winter, I think it will be somewhat Smooth if you warm up the product with Dryer, etc. before working on it.) 。
How did you like it?
The product has the same shape as the OEM, so nothing has changed.
This product may not be necessary unless the original Rubber was severely deteriorated or you wanted to change the color like I did.
Was "Included Parts:" attached?
This is a Simple product that contains only one Starter Kick Rubber in the Package.
Were there any disappointments?
At this point, we are not sure if the durability is as good as OEM, but since KIJIMA is a long-established MotorcycleParts&Apparel sales manufacturer, we believe that the durability is at the same level as OEM products.
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? column, so I will omit it.
For older vehicles, it may be more troublesome to remove the old rubber that is currently attached than to install it.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available at Quantity:1pc. enclosed, easy to understand product as you only need to install it in reverse order after removing the old Rubber.
[Notes]
Depending on the method, some of the work may be done by force, so please be careful to avoid injury.
[ITEMS TO BUY TOGETHER
If the footpeg, handlebar grip, and kick pedal rubber are the same color, it will give a good sense of unity, so please enjoy your personal sense of style, including using different colors for all parts.
[Opinions and requests to Manufacturer
Please continue to sell the current color line nap for as long as possible.
View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
Fits: HONDA MONKEY, HONDA MONKEY BAJA, HONDA JAZZ, HONDA GORILLA
Retro-chic and Parenthesis is good!
[How is it used?
The NORMAL clutch cover is not very attractive, so I bought it to change to a Fin type cover with a retro-chic design.
Was the one you received as per Image?
The roughness of the casting is a concern, but that also makes for a Retro-chic Image.
Was the installation difficult?
Simply remove the Screw and replace it; if the Gasket sticks and tears, you will need to replace the Gasket.
How was your experience with it?
There is no particular change in functionality, but it gives a sense of modification and improves Parenthesis.
[Included Parts:were they on?
Gasket included.
[Was there anything that disappointed you?
Not particularly
Many of the other companies' products are colorful or have MONKEY on them, etc., but this one was very universal and helpful.
View detail
NORMAL Parts discontinued.
The OEM Product was discontinued, so I put on this product. The carburetor needs some adjustment, but I use it without any problem. View detail
Asymmetric shape is good
[How is it used?
NSR250R (MC21) I was looking for an air cleaner that matches the size of the TA22Carburetor (54mm).
The OEM air cleaner box was originally missing, so I would have preferred the OEM one, but I chose this one because used parts are very expensive and I basically don't ride in the rain.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
The TA22carburetor is so close between cylinders that a regular cylindrical one would interfere.
This product could be installed thanks to its Oval and One Side joint.
Installation is instantaneous as all you have to do is tighten the band.
I was a little concerned about the loose insertion before tightening the band, but once the band is tightened, it is firmly secured.
How was your experience with it?
NSR250R for Package (up to 89) but MC21 (90) But there was no problem.
It is a mystery why Carburetor is almost the same, but it is compatible up to 89. Is it because the shape of the air cleaner box changes and it is not confirmed yet? I think it is because the shape of the air cleaner box changes and has not been confirmed.
There was no particular interference with the Fuel Tank or Others components.
It is universal, but as stated in the Package, it seems to fit NSR250R/NS250/CB750F/CB900F/GSX1100S.
[Included Parts:were they on?
The tightening Bandetc. is also included in the package.
As long as you have a Driver, you can install it.
[Was there anything that disappointed you?
Not particularly
【Review】
The asymmetric shape is good for TA22.
It is difficult to say what the compatibility information is, but I am satisfied because it is cheaper than buying a used air cleaner box and filter.
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
Expensive but high quality products
Matching with the fins of Engine is a good product.
It adds a sense of luxury to the exterior.
Fitting is fine and easy to work with.
It is a product that is a bit expensive and difficult to afford.
The texture is commensurate with the price, though.
View detail
Fits: SUZUKI GOOSE250, SUZUKI DR350, SUZUKI SW-1, SUZUKI DR-Z250, SUZUKI DR250S, SUZUKI VOLTY, SUZUKI DJEBEL250, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI INTRUDER250, SUZUKI ST250 E Type, SUZUKI ST250, SUZUKI NZ250, SUZUKI DR250R, SUZUKI MARAUDER250 (GZ250), SUZUKI GOOSE350, SUZUKI DR350, SUZUKI VOLTY, SUZUKI VOLTY, SUZUKI VOLTY
Cospar good
Cosmo
O-rings etc. are not included, so order OEM parts separately.
View detail
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail