Reviews
Used for preventive replacement
I replaced it before it cracked because the flexibility of the hose was reduced.
Is it not offered in Bulk items like NSR or is it expensive for a short Hose?
View detail
I cannot recommend it.
The accuracy of the parts is quite poor and it is quite difficult to install. If a person without Kill is used, the Bolt on the Engine side will be damaged. View detail
GSX-R750 Air Filter replacement High flow filtro
Since I had accumulated Webig Points, I used them to purchase a Made in England Air Filter. At first glance, the design of the air filter looks the same as that of the OEM air filter, and it seems to be compatible with the OEM air filter. However, this is an overseas manufacturer, and the roughness of the manufacturing process is noticeable and requires some modification for installation. The product of the lot I got has a quantity of parts.:Pair (for Left and Right) I would like to say to GSX-R riders that this product is not recommendable at all. View detail
GSX-R750 Air Filter replacement High flow filtro
Air cleaner with Webig's Point.
To Made in England's High flow filtro, purchased for OEM compatibility. As a result, it needs to be modified for installation. The result was a Large size variation with poor workmanship, which is typical of products made overseas. I regretted it very much. I learned that OEM parts are better for consumable parts.
GSX-RUser can never Recommendation.
View detail
Not available
Wire was too short to install in the first place.
I had no choice but to cut OEMWire and rebuild Thailandco and install it.
I would like the base of the Knob to be longer and thicker. When I pull it out, the shaft is not stable and it rattles.
The quality seems very low for the price.
View detail
Fits: HONDA CB750C Custom, HONDA CB750F Super Sport, HONDA CB750K, HONDA CB750L, HONDA CB750SC Nighthawk
The image and the real thing are different.
The image and the actual product are completely different.
Because there is no number engraving and all four have exactly the same shape,
When I try to install the Carburetor, it does not go all the way in.
In addition, the Carburetor fell out of the Indicator when trying to fit it into the OEMAir cleaner, making it completely unusable.
View detail
![[Repair Parts for Big Radiator] Universal Radiator Core Body](https://img.webike-cdn.net/catalogue/10955/5050003_TS.jpg)
Fits: KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200, YAMAHA V-MAX
Careful
Big radiator kit was already installed, but this time I purchased only Core for water leakage from Radiator, but … It seems that the Model change was done in the direction of Mr. Active, the fan bracket and Core guard were also changed in size. It was. I should have purchased it with Kit from the beginning, Camouflage…I have no complaints about the product itself, but.... View detail
It's shit.
I purchased it because of the mounting diameter Φ54, but the actual size Φwas only 45.
I couldn't get a direct fit on my SR400 CVcarburetor. It sucks. I tried to force it on and it deformed and I can't return it. It is a real piece of shit.
View detail
useless
It is useless unless you use a filter. Moreover, if you use it for a long time, the fuel will not stop. Stable Chinese quality. View detail
Fits: YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR450F
It doesn't fit
It is not compatible with YZ250FX2023MODEL, though it is compatible with YZ250FX2023MODEL.
I have removed the NORMAL White Ring as per the instruction manual, but it is not attached.
View detail
Short cord
The cord was too short and it was no good. I forced it on and tried to run, but it might not have been attached to the Plug properly, but it gave me symptoms that I thought it might stall. View detail
It was a conformity guarantee, but ….
This is the first time I have purchased a Reinforced Ignition Coil that is guaranteed to fit, but as stated in the Title, the plug cord is too shorter than the OEM plug cord and cannot be installed as is.
Return it? Or replace the plug cord at your own discretion? You have to decide whether you want to return it or replace the plug cord by your own decision.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
The packaging is too messy for the shipping!
I thought the shipping cost was high for the parts, but since they are precision parts, I thought they were carefully packaged, but they sent the products in a Vinyl bag with no cushioning material and a single paper bag, which was a big surprise.
I can only hope that there are no deficiencies, but I am anxious and displeased.
The product may be trivial, but the buyer should be aware once again that he/she is paying a Gold for the product.
That's all
View detail
Fits: SUZUKI AN125, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100, SUZUKI BANDIT400, SUZUKI VOLTY, SUZUKI VECSTAR150
Small
I see that Φ5 is the outer circumference. I mistakenly ordered it as the inner circumference.
I wish you had mentioned it.
View detail
Cracks soon.
As an indicator for a pwk28 dedicated to a 2-stroke engine, it may lack strength and rigidity against vibration. Power Filter, which is heavier, cannot be installed, and only lightweight Funnel can be installed. View detail
It was an instant scare.
Purchased on 1/24/2024 3/1/2024 only a little over a month later the fire stopped flying… It's the worst. View detail
Fits: HARLEY-DAVIDSON SPORTSTER (with CVCarburetor), HARLEY-DAVIDSON BIGTWIN 88-06
WeBig is done.
I have been using WeBig for a long time, but the service content has ended in recent years.
They even send us broken and rotten products.
It wasn't like this in the past, but has management changed?
I would not buy this company's stock. (??ω?) ?
View detail
Fits: YAMAHA XJ650, YAMAHA XJ750, YAMAHA XJ650, YAMAHA XJ750
A-Top Carburetor Joint XJ650
It cannot be installed because it is facing the wrong way. View detail
It's supposed to be brand new.
After installation, the screw part is popped from the root. (Polish)
It's a handshake.
I need to buy another one.
It's off carburetor, so it's still good.
View detail
Purchase Comments
Purchased in October
There was a little bit of Rose Throw when the device was used.
Currently about 2,000k since use.
Rose tsuki is getting better and better.
It becomes intense and not stable at all.
It went back and forth from 500 RPM to 2,000 RPM, and so on,
Slow Jet、
Main jet.
To be confirmed.
Used with scratches on the Driver that can be recognized as a "Hadrill".
Also
Due to lack of spare Jet
To be purchased separately.
It was a failure.
In products that I can recommend
None
You should not make a purchase based on price point alone.
View detail