Reviews
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS
It is an excellent product that gives a custom feel and protects Oil cooler!
My Custom is Plating or Silver to give a Gold genus feel,
I was looking for it and BEET was offering it, so I bought it immediately.
The black oil cooler is now gorgeous and has a custom look to it. It is two birds with one stone as it also guards against small stones.
I prefer EmblemType, which is smaller in size, for BEET letters, but this is the only product I could find, so I had no choice but to buy it halfway through the process.
I gave it 4 stars because the BEET letters are Large.
I completely prefer it (laughs).
View detail
Used for ZX-4R
I found the same part number for ZX-4R on the official BEET website, so I bought it. I think it is meaningful.
For general use, would it work as protection on highways?
I've worn them on other motorcycles I've ridden, but performance is secondary because I'm after looks.
View detail
It is easy to install.。
The Design was the best of many.
Core guard should be attached.
View detail
I think the design is good
Design and texture are good.
However, when the product is attached to a vehicle, a chattering sound is generated.
The upper part is fine, but the lower 10mm Bolt mounting part has almost no play and can only be mounted at that location, causing play and a chattering sound.
View detail
Wow that's cool
I decided on BEETJapan because they had the best design. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
Cool without question!
If you have the tools, you can install it, but if you are worried, ask the Shop to do it for you!
Looks pretty Cool!
Gasket is not included.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
Cool
BoltQuantity with Packing:Finish with 2pcs.
It is austere and cool.
View detail
I like the Design
I purchased this product because I liked the design. It was easy to install, but the Guard part seems to be a little distorted. I have never seen other companies' products, so I don't know, but I guess that's just how it is... View detail
Expensive but unique
Exhaust System, footpeg, and BEET were made by BEET, so we matched them.
I think the performance is not so different from other companies, but the design is one-of-a-kind.
For those who insist!
View detail
Nice finished made
Perfected finished made nice colour It can definitely protect the water tank The "beet" logo can be highlight of the bike View detail
It is rather good to be in a zephyr.
It is rather good to be in a zephyr. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI ZX-14R, KAWASAKI 1400GTR
It's cool
Since the Exhaust System is BEET, the RadiatorCard is also BEET.
It's not a prominent component, but the glimpse of BEET's Logo is cool!
Of course, the Radiator is not easily scratched, and the water temperature does not change before and after installation.
View detail
One point・Dress-up
From the front, the OEM had deteriorated considerably and was replaced.
YOSHIMURA is also available, but since it is Kawasaki, it is BEET.
The price is a bit steep, but I'm glad I put it on.
A must if you want to have it in BEET.
Parts, Bolt On, so it is easy to install.
Recommended
View detail
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS
Insufficient strength
The upper mounting Bracket part broke cleanly after only a short drive after installation. There is a quality problem. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
One point
I bought it as One point. I used YouTube as a reference when I replaced it, but first of all, when I removed the Normal cover, it did not come off easily, and I managed to remove it by prying. Next, a problem occurred:the coil attached to the cover was not removed easily, and it was finally able to be removed by the principle of Lever wearing Pipe on Hexagonal Wrench. If it came to this point, it was possible to install it easily even for an amateur because it only had to clean up the trace of the Gasket and install it. The appearance also changes, and it is quite Parenthesis good in the tightened feeling. It is self-satisfaction, but... View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
One point
I bought it as One point. It is self-satisfaction...) View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker
I changed the BEET Nozzle on my 2014 D-TRACKER-X.
In NORMAL, it seems that the Gas exhaust is limited and the Gas exhaust is thin.
So Nozzle changed from 10 hole to 12 hole and it is expected to Torque up from low speed with Smooth Gas emission.
Barrel the Exhaust System when replacing the Nozzle4 Remove the Pig Nose on the Intake
AI Cancellation Blowby gasTube and One-Way Valve installation were done at the same time;
Acceleration improvement and low speed torque up effect are …
Brushbo or something?
I changed a lot of things this time, so I don't have much experience, right?
Exhaust System Replacement Pig Nose Removal AI Cancellation eliminates the low speed torque and makes the high rpm smooth.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
Be careful when removing the Coil.
There is KIJIMA, but once is BEET.
The shape is made precisely and there is no trouble at all in installation.
When removing the Coil from the NORMAL Generator cover, be careful not to stick it to anything else, as it is actually a strong magnet. The custom look and feel will be Up to Large width.
Since I don't want to wear it, I repainted it with half LusterBlack, and the BEET letters are not Aluminum Ground, so it's not so obvious at first glance.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
The path you take once.
BEETSpec. that you go through once you start teasing.
Alfyn, Tail, and Point cover.
As you would expect from a first class manufacturer, the quality is perfect and there is no need to modify anything when installing.
Remove the OEM Point cover, pop it on and you're done.
If you want to install Screw, you can change to StainlessCap at this time.
It can be installed on any generation from FX to ZEPHYR.
I painted it with All semi-gloss to make it look casual.
The way the light hits the fins makes them stand out, so even if the BEET letters are not shaved, you can have different coordinates from other people.
View detail
If only the prices were a little lower!
I did not plan to install the Radiator guard at first, but I thought it was too late after the Radiator was broken because the standard TireS22 of NINJA1000sx rolls up gravel unexpectedly, so I bought it.
When I purchased this product, I considered other manufacturers, but I felt it was a little expensive, but I bought this product because I liked the design.
As you may have seen in other people's impressions, it is troublesome to have to remove the Cowl, and the anti-vibration rubber at the place where the Bolt is fixed on the lower side does not hit between the Radiator and the Guard as it is, so I processed it in my own way and installed it.
To be honest, I don't know the effect of installing it, but I think it's better to have it as insurance.
If you look at the Single Body, the Logo of BEET is Parenthesis good, but if you install it, you can't see it unless you look into it, so there is a point where you feel that 20,000 over is high to be honest, but I think this is the best among those sold now, and I like it.
View detail