Reviews
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled)
Color
The color gave the impression that it was brand new. View detail
FCR Carburetor Body as Funnel.
I was a little nervous about leaving it as it was with Funnel,
I bought this product
It prevents Garbage from entering the system with little change in appearance.
I think it's good
View detail
I just want the Rubber alone.
Rubber deteriorated and was lost while driving.
It would be helpful if you could sell only in Rubber.
It will deteriorate within a year.
View detail
It's the worst
First of all, it cannot be used for external carburetors (CRcarburetorc.). Obviously, the dimensions are shorter than OEM, making it unusable. The normal Indicator can be used with OEM and external carburetors, but not this product. I don't even want to add a single "*" to it. I am sorry to say that I discarded it. View detail
The fuel line is bent 90-degrees and a filter is installed! Large capacity and low resistance!
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump and fuel fliter built into the Tank, and there is no pump or filter beyond the Tank's Fuel Cock.
But I don't like this configuration...
The reason I don't like the Fuel fliter built into the Tank is that it looks Refreshing, but I can't see how dirty the Filter is at all.
It is a huge Large Filter and rarely gets stuck, but you can't be in a situation where Garbage is piling up and not know it.
Therefore, I wanted to remove the Filter built into the Tank during Restore and set up a Filter outside the Tank.
I have a front and rear independent carburetor spec. (and both front and rear are down draft, which is a special spec.), which makes it very difficult to handle the fuel lines.
The result was Large success.
We succeeded in bending the Gasoline piping 90° as desired because we installed it independently just before the Carburetor, and the Gasoline piping came together very nicely.
Filter capacity will be less than OEM's Giant LargeFilter, so Quantity to avoid flow resistance.:2pc. Set installation is also in line with the goal.
It also has a built-in Magnet, which OEMFilter does not have, so no complaints.
Transparent Material:Since it is plastic, its durability is a mystery, but it does not feel like it is made of a particularly inferior material, so it probably won't be a problem.
This is a Recommendation!
View detail
Durability is endlessly low.
PMC Material:Rubber products in general are not very durable anyway. This product is no exception. In my case, it ripped after 2 years.
And at this price.
Since the function of this Pipe is only to return the blowby gas in the Crankcase to the Air cleaner box, it is better to substitute oil-resistant hose instead of using this Pipe.
View detail
Fits: KAWASAKI Z1100 (KZ), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1000 (air-cooled)
Replaced due to oil leak
I purchased this product because I found it when I was searching for it. I applied a thin coat of Sea Ring material when assembling the product. View detail
Fits: KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI GPZ900R
Problem solved, 3 years and counting.
Snugged it up and engine is much quieter now as it would be expected with a new ProX chain. Automatic one was all out of adjustment and keep the chain too tight.Quality and finish is good. Came in a fancy box too. Came with gasket.Moved breather box to install, took minutes and put everything back after.It's been a little over 3 years and 10k km since I installed the PMC manual tensioner in zx10. Installation was a breeze and all that nasty cam chain noise that comes with the OEM tensioner disappeared. It doesn't get any easier in my opinion. I readjusted it for the first time since installation this week, and I probably didn't even need to. View detail
Mounting on HORNET 250
Installed on HORNET250.
Installed to prevent stepping stones.
Chose this product because Plain was good.
It looks great and I am Large satisfied.
View detail
Fits: KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z1000 (air-cooled), KAWASAKI KZ750-1000 72-79, KAWASAKI Z 72-79, KAWASAKI KZ750-1000 72-79, KAWASAKI Z 72-79
Oil leak
It's so slippery, I wonder how it is!
It looks better than the common Paper and Rubber!
View detail
L-Type is selected depending on handling conditions
The Straight Type was being used, but the hose was being loaded at the filter mounting point, and vibration caused it to crack, from which the gasoline leaked out.
Depending on the handling situation of the hose, we have to select the right shape to avoid loading.
It could cause a fire.
For my Motorcycle, this L-Type was the right choice.
The filter is fine and good.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
No OEMs.
I've been looking for an OEM Product for a while, but I couldn't find a good one,
I used PMC's this time and the QUALITY was totally better than I expected. I wish I had purchased it earlier.
View detail
It is soft and easy to use.
It is a little thicker than Kawasaki OEM parts, but I felt no discomfort in wearing it. The length is different between No.1 and No.4. View detail
Good looking & functional.
Being a person who likes analog gauges & wanting to be able to see what temperature the engine oil is at, I was drawn to the PMC analog gauge. The black option looks great with a black engine. The gauge itself appears to be acceptably close to accurate for showing engine oil temperature. Nice product, highly recommend to those who like functional & good looking gauges. View detail
Fits: HONDA NC750S, HONDA NC750X, HONDA NC700
Looks and performance is GOOD!
NC750X in 2021 (RH09) I installed it in
The Logo is SMART because it is not decisively labeled.
The installation required shaving the BALI with a bar File because the BALI was on the Radiator of the vehicle body. This product is so rigid that it bends when force is applied, so we worked carefully.
The Bolt is tightened in one place, but there was a misalignment due to the dimensions of the Guard, and it was distorted, so we had to bite one piece of Shim to make it just right. So, it was not possible to install the bolt by simply tightening the bolt, but it was generally easy to install.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled)
PMC PMC Z/KZ Carburetor Float Packing Set
It is a necessity when oberholing Carburetor.
For the first time, Material:I bought this product because I wanted to use Rubber's Gasket.
I have been suffering from gasoline leakage from the carburetor joints for many years, so I have high expectations.
View detail
Can be installed after everything is connected.
I love the fact that it can be installed even after the plug cord has been newly installed and connected to the Coil!
But the price is high. I think it is too high.
How durable is this resin? If it has a high resistance to heat, this price is acceptable.
How long will it last with Engine heat from now on? This is the beginning of a long, long research period.
View detail
Fits: KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI GPZ900R, KAWASAKI GPZ1000RX, KAWASAKI ZX-10, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI GPZ900R
Although I tried to replace it.
Oil started leaking from the OEM, so I replaced it.
Yeah, Parenthesis is bad.
If my friends saw it, I'm sure they would. You're about to miss the Screw. I'm sure they'll say, "Oh, no, we're not going to do that.
For what it's worth, if Bolt Nut were also Black, it wouldn't stand out so badly.
View detail
Fits: KAWASAKI Z series, KAWASAKI Z series, KAWASAKI Z series
Very high quality funnel net for Yoshimura TMR-MJN40 carburetor
Been looking for the funnel net or dust cover for my yoshimura tmr-mjn40 carburetor for quite some time. The ones we usually have are of low quality. found these on webike by PMC performance, the built quality is very high with right fitting rubber to suit the standard yoshimura aluminium funnel. I went for the bronze netting (slightly more expensive) but it is well worth the money! very beautiful and functional. highly recommended! View detail
It looks better
I bought this product instead of the 3DAir Filter I had been using for vehicle inspections because it was falling apart over time, and I had been buying a new 3D one every few years (roughly once every two vehicle inspections?). I use this product in combination with PMCOvalFilter (154-527). I looked for it but could not purchase it due to undecided delivery date. I personally think the appearance is simple and better than YOSHIMURA (a happy miscalculation). Please note that depending on the car model, it may be necessary to secure space behind the carburetor. View detail