Reviews
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
To prevent oil leakage from EngineTop
There is a constant oil leak from the EngineTOP of Initial Model Zephyr 750!
Oil leakageConstantly covered with oil from the Cylinder het, at first, Quantity:Pair (for Left and Right) I was told that there was a leakage from the moon-shaped rubber packing of the "Zephyr" and I additionally plugged it with liquid packing, but it had no effect.
advantage
No more oil leaks.
Can be pontooned.
The cause of oil leakage can be identified.
Disadvantage
The bolt is replaced only by screwing it in a little tighter, but forcing it in deforms the bolt head.
If possible, it is recommended to replace the Gasket and CamshaftPlug, so please consult with Wallet.
When replacing all the parts, the Tank/Quantity:Pair (for Left and Right) Without removing the Coil Horn, the Bolt cannot be removed from the front and back of the Engine Top Cover due to the lack of clearance.
If there is oil leakage from other locations than the bolt, other countermeasures should be taken.
Gasket1pc. of Head/Quantity:Pair (for Left and Right) Moon shaped CamshaftPlug1.35×13.5 4 pieces required
When the Gasket/CamshaftPlug is replaced, use the original Bolt and make sure that the Bolt is penetrating to the bottom, otherwise this product may be inserted only halfway.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Recommended for OEM Replace
The OEM mounts are subject to uneven wear on the chain and sprocket due to wear on the engine and strain on the chain over time, so they were replaced as a countermeasure and as a dress-up.
Before the replacement, the Chain had a tendency to be quirky in the gnawing area, but it is now straight.
My car body still seemed to have a kinked Engine due to age.
The pure Normal Thread Screw was also rusted and seemed to have rattled, so I was glad to replace it this time.
I think it will be Plus in practical terms as well, since it can also dress-up and prevent kinkiness.
It is a bit expensive, but I thought it was better than buying OEM.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Well made product.
I bought this because I changed my carburetor to a TMR, and it is an Exclusive Design, so it fits EXACTLY in the space where the Air Cleaner Unit was removed, and the oil catch tank can be laid out SMART, and the finish is great.
We asked our favorite Custom Shop to install the product, and they were impressed with the well-thought-out product without any particular difficulty.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1200DAEG
Too many gaps and no gaps
The product itself is where I would like the dimensions to be a little more in line with the body of the car.
There are many gaps at the top and sides of Battery
ConnectorQuantity at the bottom of the Fuel Tank:2pc. Set is the Quantity:2pc. Both sets cannot be installed in the OEM position and must be removed from the ConnectorHolder and connected via aerial wiring.
I wanted to PowerfulSpec. so I had no choice but to use it.
I'd trade for something else if I could find something better, but I'm not sure there's anything better out there.
View detail
A must for FCR Carburetor Body!
[How is it used?
Touring, city driving
I purchased this to fix the Idol Adjustment Wire on the FCR Carburetor Body.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was easy just to tie it to the Bolt on the Flow Chamber.
How was your experience with it?
Wire is well fixed and easy to use.
[Included Parts:were they on?
It is attached.
[Was there anything that disappointed you?
None
View detail
The costumes are good
The product itself was installed without any problems, and there were no problems with the operation, making it a very good purchase. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZrX1200ZrX1200 DAEG
Car Type Exclusive Design
The car model Exclusive Design is the only one that is actively fitting.
The space under the Seat is also larger and easier to use because the air cleaner box has been eliminated.
The price is A little high, so the cost performance is low.
I would have liked a Stainless mesh hose for the price.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
ZEPHYR750Oil seepage
Initial ModelEngine's problems were solved with a simple operation.
When the head cover is removed, it repeats again.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750
It's an Ideas product.
I was looking for a Cap that would fit well in the secondary air inlet when I found this product and purchased it immediately.
I really wanted to use the carburetor without killing the secondary air introduction function after replacing it, but the intake sound was so loud that it was tiring to ride, so I had no choice but to plug the carburetor.
When I bought it and got it in my hands, I saw this Cap. I've been hit. I thought www.
I didn't think KawasakiOEM Parts could be diverted.
Ideas fee.
View detail
Refresh the ignition system as well.
Since it is a '99 car, there is a possibility of Coil-related deterioration due to the age of the car.
Replaced by preventive maintenance.
This was my first purchase of this type of product and I was amazed at how well it worked.
First, the Engine's startability has increased.
It seems to be kind to the Battery as well, as it runs the Engine without using extra electricity.
And the most surprising thing was that the Engine's rotation became Linear to the Axel's movement! 。 The blow up is so smooth that it is hard to believe that it is an OEM carburetor.
View detail
Fits: KAWASAKI ZEPHYR1100
A necessity once the air cleaner is removed.
The OILCatch tank and Accessory Case are well put together and look Refreshing and Balance.
I am hesitant because of the price, but I think it is easier to use this product than to install different manufacturer's products and mess around with them.
The Accessory Case holds all the carburetor adjustment jets, tools, and dustcloth, so it is very useful for stopping along the way to readjust the carburetor.
View detail
Not bad!
There is nothing wrong with the product, but the price is too high, you can use it enough if you buy a Wiring stop at Home center and the price is only a tenth of the price.
If you are particular about MotorcycleParts, this is the product for you!
View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100
I will return on my own.
I installed and moved this product from an OEM LeftSwitch Box, and even with the loss of 1 pc of wire, the Handlebar area is refreshing.
It is a product, but it needs to be held because it goes back when you pull it. But it is also a good process and does not feel painful.
Product Quality fits very well with the feeling of being noticed if you ask me.
As for the installation, it is necessary to remove the carburetor, so it would be a good idea to perform it during OH.
View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI GPZ900R, KAWASAKI ZRX1200, KAWASAKI ZEPHYR1100, KAWASAKI ZRX1100
If it has a sub-frame
I have no complaints about the product itself and I think it is a good product, but I could not install it on my Active sub-frame because it hits the chalk when I pull the chalk. I am sorry to say that I give up this time. (I think it is not possible to install the sub-frames on the ones with sub-frames, but not on the ones without sub-frames. View detail
Fits: KAWASAKI ZEPHYR1100
Installed on ZEPHYR1100
Is the price too high for the build quality?
Looks good, installs fine.
It is difficult to adjust the length of Hose.
View detail
Review
Easy to start and definitely Torque up!
This is a buy
The question of price and satisfaction is a personal one.
I liked it.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100
Ba GOOSE Cut-out Breather Plate
The PlateBody is also very cool because of the aluminum cut-out. View detail
FCR Carburetor BodyIdle ScrewHolder
The price is cheap, and it is convenient Goods that can choose the color.
If you get tired of it, you can buy a different color.
View detail
Pretty handy
It is easy to install and convenient, although it is a little expensive. View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
I wish it was a little cheaper
This solves the problem of the ZEPHYR750 First Model Type
I wish the price was a little lower
I wish there was a Rose sale from 1 pc
View detail