Reviews
Looks good. Fit nicely.
Compared to the old hose, this is much more flexible. Fitment is good, don't think there will be any issue. I can recommend this hose for replacement need. View detail
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily
Just like in description.
Just like in description. Fits fine. Jee jee jippiajee ja niin pois päin..
Tuli nopeesti postilla.
Shovelhead 1973...
----------------------------------------------------------
Just like in description. Fits fine. Yee yee yippieee and off we go..
Came quickly by post.
Shovelhead 1973...
Powered by Google Translator
View detail
![[SR] Inspection Cover Gasket](https://img.webike-cdn.net/catalogue/images/115332/115332_L014039_TS.jpg)
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200
NeoFACTORY
I have not used it yet, but it is cheaper than OEM and looks durable. View detail
Fits: HARLEY-DAVIDSON 3ΩCoil cars
Smaller processing may be necessary depending on the type of car and the type of coil.
Purchased this product as Ignition wire for BMW.
First of all, the length was long, but that was not a problem, because it could be cut off if it was too long.
The connection terminals on the Ignition coil side were simpler than those of the OEM, and the quality of the terminals varied.
I had no problem because I assumed that I would have to change the connection terminal, but I think that those who use it as it is should check it with caution.
Durability is still to be determined.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
I have not used it yet, but it is cheaper than OEM.
I have not used it yet, but it is cheaper than OEM and looks durable. View detail
Fits: HARLEY-DAVIDSON Vehicles with Filter in Oil tank from 53-83
Just fit
I was worried about whether the product could be used because it is a universal product, but there was no problem at all.
It was Just fit.
The price was low, Packing was included, and it was very easy to just drop it off.
Very convenient for easy replacement.
View detail
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
Minimum Quantity to Overhaul carburetor:Set
I used this for an under-seat engine hole on a 2000 XL883XL1200C SPORTSTER 1200. The vehicle had been immobile for a long time and the Carburetor rubber parts were hardened and leaking fuel. The beauty of this kit is that it omits the Float, DiaphragmRubber, and other parts, and only requires a minimum quantity of parts.:The Carburetor functions have been restored and I am generally satisfied, but the rubber packing of the Float chamber does not fit perfectly and I am not able to assemble it. View detail
Genuine Continental Fuel Hose
I do have a lot of bikes come in with really bad fuel lines for one reason or another and I always like to have some of this hanging around for just this reason. One bike in particular had the original stock line which was far from good and this bike was literally a few years old, 2020. Really rigid line was replaced with this. I do like Continental fuel hose as it is proven to work exactly as it should and not be too rigid but also has enough flex to be abnle to loop around weird placements. This was well priced from Webike and they also packed my order with great care so not to damage or bend this hose where it should not be bent. It came as a nice loop.The flexibility is excellent. A really nice fit to the clamp fitment too. Very pleased, thanks Webike. View detail
ส่งเร็ว ส่งไว จะตกใจประทับใจมากครับสินค้ามีคุณภาพจะอุดเรื่อยๆครับ View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Thank goodness for OEMAir cleaner box support.
I used this on my 2000 883XL1200C SPORTSTER 1200. The air cleaner element is easily dirty from the inside due to the engine oil from the Breather, and the one before the replacement was sticky. Even so, I don't feel any deterioration in performance, but it still feels good to put on a new one. Also, I think it is good that the new Sponge part is stiffer and can be fixed firmly. I think that there are few users who use the old type and Normal air cleaner, so it is nice to have a new air cleaner element at a relatively low price. View detail
As fuel pump piping in Fuel Tank
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump built into the tank, and the rubber hose connects the fuel pump to the piping in the tank that goes to the fuel cock.
I was going to use AN-BU cloth-wrapped hose, but when I soaked it in Gasoline as an experiment, I discovered that the adhesive-like paint that holds the cloth in place was being attacked, so I decided to use this high-performance hose.
As you have already noted, the quality of the Hose is superior to other Hoses.
Fuel Hoses sold by top brands such as DAYTONA, KITACO, and Posh are of course safe to use and do not easily crack over time as inferior Hoses do.
Therefore, for ordinary use, those hoses that are easily available will suffice.
However, if they are used as they are for years, or if they are used in such harsh places as tight bending, passing through places with great heat, or constantly exposed to direct sunlight, they tend to become Pushing stiff.
When you go there, this Hose is different.
It is the same hose that EuropeManufacturer uses in the engine room of a car, and we know from experience that it does not lose its flexibility even in the toughest conditions.
In any case, the quality is not hampered.
I used AN-BU's cloth-wrapped hose for the parts visible through the gaps in the Frame for visual appeal, but if there is no such reason, it is best to use this hose for all of them.
At least the Trouble caused by Fuel Hose should be wiped out.
View detail
It's good to have a sense of unity.
It would be good if it is attached with BezelRing at the same time, so that it can be unified with Black. View detail
As the name suggests, Idling adjustment is now easy!
[How is it used?
It is Carburetor Vehicles, but when I am warming up and running with the Chalk pulled, I let the Plug cover it.
To avoid this, the Chalk is turned back on as soon as the engine starts, and the Idle Screw is used to make adjustments during warm-up operation.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Installation itself is easy, but care must be taken not to drop Washer or Packing.
If you count how many turns you made when removing the current Idle Screw, installation can be done smoothly.
It is too long and bloat, so it needs to be supported by something. I made the guide out of Stainless Steel Wire.
How was your experience with it?
I am Large satisfied with the ease of reaching and adjusting the Idling even in the straddle position.
Other items that would be helpful
Since there is no guide for rotation, it is a good idea to have something to mark the rotation. I am on Knob. The Smile badge. pasted.
View detail
Fits: HARLEY-DAVIDSON Most Harley HSRs using CVCarburetor and EFI, as well as Carburetor carburetors according to the CVCarburetor Air cleaner mount.
I installed it on my XLH883.
I purchased this product to use on my HarleyDavidson XLH883.
The price was reasonable and the installation accuracy was excellent.
One complaint is that the Chromium Plating has a strong Shiningly feel to it, which is good for the current XL1200C SPORTSTER 1200, but a little too bright for my older, rougher 883.
I think it would be great if there were also types such as Matte Black.
View detail
สินค้าดีส่งไว สั่งสินค้าเป็นชิ้นที่ 2 แล้วครับและจะอุดหนุนตลอดไป ขอบคุณครับ View detail
![[SR] Primary Cover Gasket](https://img.webike-cdn.net/catalogue/images/115332/115332_L014035_TS.jpg)
Fits: HARLEY-DAVIDSON FLT, HARLEY-DAVIDSON FXR SUPERGLIDE
degree of fit
Material-wise, it is not a strong classification, but if you handle it carefully, you should have no problem. View detail
Fits: HARLEY-DAVIDSON OEMGas tanks for cars with -75:Various types of gas tanks with 3/8-NPTSize cook opening
It was nice!
For now, there are no Gasoline leaks!
I don't know how long it will last!
Feels good to use!
View detail
Product Good Quality and thx webike View detail
Fits: HARLEY-DAVIDSON Universal
Millimeter but dare InchHose
When I installed an oil cooler on my XR250 using a universal type hose, I used a cloth mesh hose that I had on hand and when I installed it, the hose on the side where the OEM pipe was cut slipped out and I had a terrible time.
So I looked into using a stainless mesh hose that is close to the exhaust pipe, heat resistant, low expansion, and reasonably priced.
The Hose is pretty tight to install, but I looked at it with Idling for 30 minutes and this time it was Large sturdy.
Now we will be able to go out for a real test run.
It also fits tightly into the M8Banjo.
If you measure and buy in the length you need, you can use it without waste.
View detail