Reviews
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
ca1374
We need to retrofit my friend's SUPER CUB CUSTOM with the necessary spare parts that will positively affect the operation of the equipment over time. One of the main things is to protect the internal parts of the engine from small chips (which are formed during engine operation). This plug is the optimal solution to this issue. View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
ca1374
My friend found out that I have bolts with a magnet on all my equipment to collect chips from the engine cavity. He asked to buy this bolt for him on a HONDA SOLO, too. Upon arrival, he handled the installation himself and he really liked the quality of the material!!! View detail
I wonder if I need it to replace the carburetor on the CUB.
Since the replacement of the carburetor in the CUB forced us to replace the cook with an OEM fuel cock carburetor, we had a little choice and thought about it.
(1) 2 system Cook replacement
(2) No Cook with Tank set to Custom.
(3) No Cook with Tank as one line with After stuff.
(4) On/OffCook installation with one Tank system.
So, for now, we decided to just use Cook, which is cheap and doesn't cost a lot of money up front.
The mounting position was extended with Bracket and temporarily attached. It was usable as usual. Not bad for the price.
I just put it on, so I don't know how durable it is. Therefore, I gave it 1 star minus.
View detail
Required for disassembly work
It would be nice to have when doing overhaul.
I have searched and found that many people reuse the Crankcase gasket, but I think it is better to smooth the Crankcase gasket with oil stone and replace the gasket to prevent oil leakage.
I studied the initial overhaul with New Engine.
View detail
Fits: HONDA MONKEY/GORILLA, DAX, CHALY, CUBetc. vehicles equipped with Horizontal TypeEngine, HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA CUB
This is faster and quicker than a poorly designed Engine.
I bought this once because the Engine I put together myself was sluggish no matter what I did.
I was wary of the Chinese Engine or ……, but it worked on the PON without any problems.
I don't know about durability etc. yet, but I didn't have any difficulties except for the wiring process on the car body side.
CUBOEM's SeesawShift Pedal can also be used normally.
However, as mentioned earlier, if the supplied Harness is not used, it is necessary to modify the generator/StarterWiring on the car body side to Bullet Terminal.
Especially with Cell motor Harness, you should buy a Bullet Terminal that is compatible with thicker Cable because you need to process the thicker Wiring for Starter on the Grounding Wire.
View detail
More than Bore up.
Swapped from SUPER CUB 50 OEMEngine
With Engine itself pon
The carburetor came with a 16π? The carburetor came with a 16&pi carburetor, but I used a pc20 funnel and a YOSHIMURA intake manifold. The rest is KITACO clutch wire and clutch lever.
FSprocket exchanged R for 15, or was it 38?
I'm not sure about Included Parts:as you don't mention it specifically,
I tried to use the Indicator and found that there are two in the box, one for the carburetor side and the other for what? I tried to use the Indicator and found two in the box, one for the carburetor side and one for what? Well, I don't need it because CUBOEM13π is obviously not enough for 86cc lol.
The original engine oil was replaced with G2Oil after warming up and breaking in salad oil.
I don't know about the attached carburetor, but after breaking in, full throttle, well, thanks to the pc20, the CUB is no longer a CUB. 60kmMeter is swept away in about 5 seconds.
Another AA01 centrifugal 3 speed 88ccHigh Camshaft18πcarburetorOthersSprocket uses the same size, well, Gold amount is more expensive to bore up, so it is still recommended for those who want Manual clutch.
Installation can be easily done by one person.
The difficult part would be to modify the terminals to match the Engine side when using OEMHarness.
I think it would be more of a hassle to replace even the Harness.
As you may have read in other sites or on our side, the first time GEAR enters the market, it is very reluctant to do so.
Neutral goes in for me, but I often have trouble returning to 1st gear from 2nd gear.
The wiring diagram in the Instruction Manual was Harnessfor MONKEY, but the color was the same in CUB.
I don't know how durable it is since it is currently just loaded, but I hope it was a hit.
View detail
Fits: Others Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Easy to change carb position
Casting seems very strong, however the casting port hole for the engine side is not perfect. I'll need to use a Dremel to tidy up the port as can be seen in the photo. Otherwise I feel it will not produce as good as power as it could. Installation is very easy on monkey due to being able to position the carb however you like. Product was priced well just a shame about the casting hole. Webike is always very quick with shipping A+ View detail
Fits: Others Universal
Broke after 3 months.
AF05E with AF35carburetor installed
Cover part is Material:Plastic, and I noticed that the Bolt was cracked from where it was stuck.
Fortunately, even if this part breaks, it is sucked in via Filter, so we have no choice but to use it as a normal Powerful!
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Great oil gauge
Help add to the final look of your motor with this machined oil dip stick. same length as the stock 50cc but adds a little bit of class to the overall look of the engine View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Used in CUB110.
Installed at the time of oil change and also installed with bore up and it catches surprisingly well. View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 50, HONDA CUB, HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Recommended
If you don't care about how it looks, why not?
There is a matter of taste.
It's cheap, so I'm happy with it.
View detail
Fits: HONDA monkey, HONDA For Honda horizontal engines, HONDA For Honda horizontal engines
Head Breather Port
Machining is well done, if you dont need it to breathe, it comes with a blanking plug to block off the port. the barb on the banjo fitting is 8mm View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
Communication failure? Repost.
If you are OEM with Cell motor, you don't need to buy CUB harnesses.
[How is it used?
I purchased this LITTLE CUB to improve its street riding performance while restoring the long-neglected LITTLE CUB that was handed down to me.
From a friend Cheap Bore Up Kit." recommended, but I wanted to save the Normal engine for the long run in case of an emergency. "What can we do to help?" I found this product while browsing Webike's site.
Was the one you received as per Image?
I decided to purchase the product after seeing the introduction image in the Site and the video of the person who installed the product in the Video Site, so the product was just as I had imagined.
Was the installation difficult?
Simply replace Engine Only." Then it is not difficult because it only requires 2 Bolts and Wiring removal.
However I can get on board with no problems." It requires some knowledge and Large amount of effort to bring it to the state.
How was your experience with it?
We have not been able to gain any distance since installation, but so far it is running fine for the amount of work we have put into it.
But if you look at the Review here and the video Site. Maybe it's not just a safe ride forever?" It's like...
I think I have a hit ha Gap. Bingo I just hope that we are pulling the
[Included Parts:were they on?
35,680 yen in bare bones with Engine (14 Driven Sprocket included) Body, Carburetor, Intake, Kick pedal, Change pedal, Relay and CDI etc...
I have added Harness for CUB with Option, "Elementary." I believe that a MONKEY type Harness will be included in the state of
If you are a MONKEY type. "Elementary." Kit may be enough to form a Large body (wishful thinking).
[Was there anything that disappointed you?
from the start Harness for CUB The Optionally purchased Harness is almost identical to the OEM Harness that originally came with the vehicle, and was a waste of money for a Harness that will not be used.
And to begin with, the Harness on the Engine side does not match the Harness for the CUB purchased with the Option.
I went all the way to this Engine. Harness for CUB What an Option if it is available! Harnesses the Wiring process to fit this Engine. The Harness side is the OEM standard Wiring & Connector, but the Engine side has a completely different Wiring process.
OptionHarness was never used at all because the Engine side Wiring process & processing had to be done.
Forced to think Positively No Cells. It may be good when installing in a CUB, but my CUB was with Cell motor, so it was a complete waste of Gold (of course, at the time of purchase, there is no mention of harnesses to make a Cell-less unit Cell-compatible).
Everything. Universal Type. So, in the CUB system, with the attached carburetor & intake manifold. OEM style." I can't get around the (is it Large sturdy if it's a MONKEY?). (Would MONKEY be Large sturdy?).
Other items that would be helpful
Point and hang of installation
The level of difficulty will increase unless you are able to see and understand the wiring diagram.
[Availability and clarity of the Instruction Manual
An Engine Wiring Diagram for Tanaka Shokai is included in the package, but it is not sufficient, so a Wiring Diagram for the vehicle you wish to install is also required.
Setting may not fit in a pontoon, and this is a product for those who can enjoy and adjust it.
[Notes]
Please check the introduction & description section of the product carefully.
I was fortunate to have a friend who was good at electrical systems, so I asked him to do the Wiring process (a whole lot of work).
If you are a beginner or not good at electrical stuff, as I am. "Decent friend." It may be better to rely on a professional or paid PRO.
[ITEMS TO BUY TOGETHER
If you want an OEM look. SUPER CUB90 If you want to create a custom look and feel, you should buy custom parts to go with it.
[Opinions and requests to Manufacturer
Even though it is an overseas product, it is very nice to be able to purchase Complete engine at this price.
In addition to the engine, the Honda Horizon TypeEngine vehicles have a wide selection of parts at reasonable prices.
View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
If you are OEM with Cell motor, you don't need to buy Harness for CUB, but Large sturdy (Wiring is required anyway).
[How is it used?
I purchased this LITTLE CUB to improve its street riding performance while restoring the long-neglected LITTLE CUB that was handed down to me.
From a friend Cheap Bore Up Kit." recommended, but I wanted to save the Normal engine for the long run in case of an emergency. "What can we do to help?" I found this product while browsing Webike's site.
Was the one you received as per Image?
I decided to purchase the product after seeing the introduction image in the Site and the video of the person who installed the product in the Video Site, so the product was just as I had imagined.
Was the installation difficult?
Simply replace Engine Only." Then it is not difficult because it only requires 2 Bolts and Wiring removal.
However I can get on board with no problems." It requires some knowledge and Large amount of effort to bring it to the state.
How was your experience with it?
We have not been able to gain any distance since installation, but so far it is running fine for the amount of work we have put into it.
But if you look at the Review here and the video Site. Maybe it's not just a safe ride forever?" It's like...
I think I have a hit ha Gap. Bingo I just hope that we are pulling the
[Included Parts:were they on?
35,680 yen in bare bones with Engine (14 Driven Sprocket included) Body, Carburetor, Intake, Kick pedal, Change pedal, Relay and CDI etc...
I have added Harness for CUB with Option, "Elementary." I believe that a MONKEY type Harness will be included in the state of
If you are a MONKEY type. "Elementary." Kit may be enough to form a Large body (wishful thinking).
[Was there anything that disappointed you?
from the start Harness for CUB The Optionally purchased Harness is almost identical to the OEM Harness that originally came with the vehicle, and was a waste of money for a Harness that will not be used.
And to begin with, the Harness on the Engine side does not match the Harness for the CUB purchased with the Option.
I went all the way to this Engine. Harness for CUB What an Option if it is available! Harnesses the Wiring process to fit this Engine. The Harness side is the OEM standard Wiring & Connector, but the Engine side has a completely different Wiring process.
OptionHarness was never used at all because the Engine side Wiring process & processing had to be done.
Forced to think Positively No Cells. It may be good when installing in a CUB, but my CUB was with Cell motor, so it was a complete waste of Gold (of course, at the time of purchase, there is no mention of harnesses to make a Cell-less unit Cell-compatible).
Everything. Universal Type. So, in the CUB system, with the attached carburetor & intake manifold. OEM style." I can't get around the (is it Large sturdy if it's a MONKEY?). (Would MONKEY be Large sturdy?).
Other items that would be helpful
Point and hang of installation
The level of difficulty will increase unless you are able to see and understand the wiring diagram.
[Availability and clarity of the Instruction Manual
An Engine Wiring Diagram for Tanaka Shokai is included in the package, but it is not sufficient, so a Wiring Diagram for the vehicle you wish to install is also required.
Setting may not fit in a pontoon, and this is a product for those who can enjoy and adjust it.
[Notes]
Please check the introduction & description section of the product carefully.
I was fortunate to have a friend who was good at electrical systems, so I asked him to do the Wiring process (a whole lot of work).
If you are a beginner or not good at electrical stuff, as I am. "Decent friend." It may be better to rely on a professional or paid PRO.
[ITEMS TO BUY TOGETHER
If you want an OEM look. SUPER CUB90 If you want to create a custom look and feel, you should buy custom parts to go with it.
[Opinions and requests to Manufacturer
Even though it is an overseas product, it is very nice to be able to purchase Complete engine at this price.
In addition to the engine, the Honda Horizon TypeEngine vehicles have a wide selection of parts at reasonable prices.
View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
When installing on a CUB, be careful of the compatibility with the vehicle body.
I bought it after confirming that the OEM changefootpeg does not interfere with it, but the change shaft is longer than OEM, so I could not install it.
I feel that this is a kind of fraud because the answer to my inquiry before purchase assured me that it could be installed, but after purchase, the answer was given as reference information.
Regarding the quality, there are dents on the edge of the opening at the top of the cylinder, and it is assumed that there is a risk of blowing in the future.
Note that the Cell is mounted on the underside like the GiornoCUB, so the parts around the generator are not compatible.
OEM Product is available for CUB90 intake manifold, muffler, and rear brake pedal.
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Aluminum will break someday.
Material:I think Aluminum will break someday.
Aluminum will crush the corners of the Bolt even with the proper Torque from the first time.
Hard Material such as iron is good.
In the first place, there is no such thing as Aluminum in OEM, so that proves it.
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
TANAKA TRADING Large Magnet Drain Bolt
The quality of workmanship and material is very pleased. I took it as a gift for a Chinese moped. Everything went well, there was no doubt about it. I liked these bolts the most of all that I have ever used. If nothing changes, I'll take more. -------------------------------------------------- -------- The quality of manufacture and material was very pleased. I took as a gift for Chinese moped. Everything came up, which did not have to doubt. These bolts liked the most of all that it was used. If nothing changes, I'll take it again. Powered by Google Translator View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA GORILLA, HONDA DAX
I put it on a 75cc GORILLA.
I put it on a 6VGORILLA that I bore up to 75cc.
The Fuel Cock had rotted out of the OEM and had been replaced with an external one.
Change the two Bolts on the Head side to M6 25mm.
I just replaced the Accelerator Wire for Big carburetor and it arrived as is.
Power Filter is KITACO's 35-pipe
I took it apart and reassembled it as it was and tightened the ThrowScrew a little.
When I took it apart again after running it for a bit, I found iron powder in the float chamber.
I just cleaned and assembled it and it is running well.
The Choke Lever is now on the Exhaust System side, and it is difficult to touch.
Other than that, I have no complaints.
View detail
Fits: Others Vehicles with 12vCDI ignition single-cylinder engine, HONDA MONKEY, HONDA GORILLA, HONDA LITTLE CUB, HONDA XR50R, HONDA CRF50F, HONDA Monkey Baja, HONDA DAX, HONDA MAGNA50
Starting and Idling are OK, now it's time to observe the durability.
Purchased because of problems with starting and Idling.
After installation, the above two points were immediately resolved.
The installation method is easy to find on the Net, so no problem.
No instruction manual.
1.Remove the leg shield
2.Remove the Right Side Cover, and then remove the Battery Cover and Earth?
3.Remove the Left Side Cover and remove the nut where the IgnitionCoil is fixed.
4.Replace IgnitionCoil
5.Remove the plug cap and thread the cord through.
6.Return Battery coverretc.
7.Turn in the plug cap and insert it into the plug.
8.Return the leg shield.
Now it's time to observe the progress of durability.
I'm a little concerned because of the low price, but ….
View detail