Reviews
Fits: HONDA Livdio ZX, HONDA diocesan, HONDA diocesan, HONDA TUDAY F, HONDA TUDAY F, HONDA TODAY., HONDA TODAY., HONDA Dio (4-stroke), HONDA Dio (4-stroke)
Price is the same as OEM Product
Compared to OEM Product, the size is a little smaller.
The quality seems to be better than NTB, but there is no price Merit.
View detail
Fits: SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI Address 50, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz
The end result of the intoxication of the maximum speed increase. And the reason why it was not a compatible car model?
ADDRESS V50 '06 (CA42A) After a month of driving the car, it was discovered that the oil had been severely depleted. Later, after replacing the broken Exhaust System, I test drove the car and found that it was blowing white smoke. I had caused the oil to go up.
It is true that the upper limit of "maximum speed" is increased to Large range. However, the maximum speed on level ground is still 60 km/h, and going over 60 km/h on a downhill will put an unreasonable burden on the driver.
It is easy to install perfectly and the effect is Large. This may have been the reason why the product was not made compatible with the car model.
By the way, I was feeling a fine and small vibration at 50km/h or more. Was it because my center of gravity was shaking and the burden was being placed on that side? No way …
View detail
Fits: SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI street magic, SUZUKI Address 50, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz, SUZUKI zzz
The maximum speed was increased by only a few kilometers.
Address 50cc VERSION of a 1998 110
The maximum speed was about 62 km.
65km with good luck on the way down.
For some reason, the maximum speed does not increase.
Weight Roller is so bad that it will not accelerate any more heavily.
It can be installed, but the characteristics do not match.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA PCX125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, HONDA PCX150, HONDA PCX125, HONDA PCX125
it is exchanged
Replaced
The front and rear orientation can be either Quantity:I don't have to be careful when I Set, so it's easy.
It's been running without any problems, especially so far.
View detail
Fits: HONDA DIO(4Cycle), HONDA DIO CHESTA, HONDA DIO CHESTA, HONDA TODAY F, HONDA TODAY F, HONDA TODAY, HONDA TODAY, HONDA LIVE DIOZX
AF35 LIVEDioZX
I think the durability could be a little better and the Balance would be better. View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
The cutting speed of Clutch is OK
I installed it on my 1YP2. I had a Taiwan CYGNUSX Spring on it before, so any change?
But the result has changed. The meet RPM was increased from OEM to about 1000 RPM.
I think it is about 500 rpm higher than Taiwan Spec. I think it should be a little lower.
However, it became possible to cut it at 20 km though the clutch was cut under 15 km in NORMAL, and it was easy to ride.
The part that became is good.
View detail
Used for PCXJF81
[How is it used?
Used to replace V-Belt on Scooter
Was the one you received as per Image?
The OEM Product is a Double Cog Belt, but this item is inside only.
Was the installation difficult?
The installation process may be complicated, but the installation itself is easy.
How was your experience with it?
I thought it was slightly longer than the OEM Product.
[Was there anything that disappointed you?
No. It makes me feel slightly more Torque-like without any problem in use.
View detail
Fits: HONDA DIO(4Cycle), HONDA DIO CHESTA, HONDA DIO CHESTA, HONDA TODAY F, HONDA TODAY F, HONDA TODAY, HONDA TODAY, HONDA LIVE DIOZX
For Refresh
I bought it along with Pulley and Belt for the Live DIOZx Refresh.
Due to our lack of confirmation, Quantity:I bought it thinking it was 1 Set of 6pcs. but it's 3 pieces.
Please be careful
I haven't installed it because I bought it again separately, but I think the quality is good.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Replacing the Clutch Spring on CYGNUS
I bought a CYGNUS Clutch Spring for Replacement as it seems to have broken.
But I gave it up because I didn't have enough tools to remove the Clutch.
I purchased a Clutch Assembly and installed it to replace it.
If you want to buy a little bit of detail, you might want to use an assembly.
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Majesty S, YAMAHA Cygnus X
Alternatives to OEM Parts
It can be used as a replacement for OEM parts without a large BALI
Even if you don't know the OEM parts part number, it's easy to specify the model of the car you want to buy
It's not expensive and if it's worn out from maintenance, replace it
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR
There's nothing wrong with the product
The DAYTONA Weight Roller is a quantity:1 Set of 3pcs
Six for the price, that's a steal! if you're wondering
Only 6 pictures and still Quantity:1 Set of 3pcs.
It was mentioned in the description section, but I made some assumptions
I missed it
Please don't misrepresent it
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Majesty S, YAMAHA Cygnus X
It's neither good nor bad
Purchase DAYTONA because it is not sticking to OEM Product.
I was able to install it without problems.
Durability is just as installed, so whatever.
View detail
Best offer
Greetings To webike managers, I ask you to analyze a better offer for me in the daytona and chamaleon products purchases for honda lead JF06 and JF45 I am interested in buying many products but I need a better offer thank you very much View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Gear C, YAMAHA Gear C, YAMAHA JOG ZR [YG50Z] 2000
Drive system Refresh
I purchased the DAYTON APulley kit I was interested in when exchanging OEMPulley. Clearance of Pulley and Slide Piece It was bad, because the movement of Ramp Plate was bad, I shaved it a little. It got better now - - - So the quality is two stars.
Although it is an impression of running, the acceleration feeling improved and it became fun compared to before.
View detail
Although it is safe, it is different from OEM
I chose it in the high durability part of the item description, but setting is changed because it is slightly longer than OEM.
The price is higher than other Manufacturer, but it is cheaper than OEM. If it is DAYTONA, Quality Check is solid so it seems that Ha Gap is not there.
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX160, HONDA LEAD125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S
It is a price-oriented thing, but it is more secure than an unknown Manufacturer
I use it for K9 of Addressv 125.
I used this product of DAYTONA from last WR exchange.
A good place,
Where it can be incorporated into Pulley regardless of direction of rotation.
Bad place & anxious place,
In combination with an Exhaust System that performs the best performance such as OEM WR like SP Tadao,
When putting this product as a lightweight WR, 3,000 km It will cause a strange reduction in places that are not there.
Conversely, Exhaust System that demonstrates Performance with high revolution like YOSHIMURA,
It does not cause a reduction in steps and brings about 5,000 km smoothly.
(Grease coating on WR at the time of incorporation, drive system is for OthersNORMAL. )
Since the original d of this hand is a Nambo ride, it is a good missing Exhaust System,
To set up using the upper rotation,
I think that it is a good product of good wear resistance to price.
It is best to buy at Sale time, yes.
View detail
I am addicted without any difficulty but it is slightly loose
V125G K6 Mounting at 22000 Km During use, running 20,000 ↑ Aged over 10 years ↑ Does the installation part have become loose or whether it is a new car or not? Although it was loose to the extent that there was no problem in operation on my K6 of aged deterioration, I made Rose several times at the time of incorporation, now it is safe to work together View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
First of all, Mr. Daytona
For Japanese specification 1YPCYGNUS.
Taiwan Spec. I approached Clutch meatTiming and purchased it.
FOR JAPAN MODELCYGNUS is considerably relaxed acceleration so I wanted to manage somehow and it came to be installed.
Since the driving system is only a little injured, even this hardness is satisfying to me.
View detail
Fits: YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
You can see the difference even at 3%
It attached to FOR JAPAN MODELCYGNUS1YP.
I did not investigate well, others' impres
I am not good looking myself
I feel that compatibility with OEM Clutch is not good
To do.
Spring is countercurrent compared to OEM.
It is not certain whether that is the reason
When I opened Throttle
Weird strangeness ...
Something strange when I returned Throttle ...
Looking at various impressions
There was a person with similar impressions.
When purchasing webike's impulse for reference
Because it turned out to be
I will try to look at Impre often at next purchase
thought.
View detail
Fits: YAMAHA Cygnus X 19, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Less going on - -
Net purchased because it has a good reputation for this is for FOR JAPAN MODEL but installed in CYGNUS X 5 Taiwan.
I wanted to improve the outing delayed by TEMPO 13 at the start of Normal pulley's exit but unfortunately there was no difference between Normal pulley and Large. Although it may be improved if you add a lot of Shim washer, something you did not want to put too much into considering the Belt burden...
Regarding medium speed and high speed, the feeling of Torque slightly rises from Normal pulley.
It looks like Weight roller 9g made by OEMPulley & DoctorPulley.
In addition, regarding the Black fluoride processing of the Roller part, it peels off and it gets stuck to the Weight roller side when using about 30 kg, so it may be better to peel off in advance and use it.
For Pulley who runs entirely for those who run chillin, Roller comes with the included 11G, 10 or 10. Around 5.. We do not Recommendation to make it too light for this Pulley only.
Although it is a dramatic change to the body of the Japanese specification, Taiwan Spec. Pulley has not much difference in car in car.
I changed to Normal pulley & Shim 1 mm & Doctor 9 g because Fee Ring did not suit me.
View detail