Reviews
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500
good strong belt
I've bought these belts before from webike, and they last a long time.when I changed it, it still looked like new, with no cracks. And the price is right, which fits my budget. View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500
Yamaha
Good time of day. I am happy to use the japan webike . I have been cooperating with you for a long time . I really liked this manufacturer of the variator belt for the Yamaha tmax 500 maxiscuter . I will recommend this product to my friends and acquaintances . View detail
Strap a bit small
I bought this belt but it is a little shorter than the original and suddenly it shakes a little!
I hope a defect on the ones I bought -------------------------------------- -------------------- I bought this belt May it is a little shorter than the original and suddenly it trembles a little! I hope a defect in the ones I bought Powered by Google Translator
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500
RK RK TAKASAGO CHAIN GATES [Gates
Replace with the same product currently in use.
It is the same product and has not yet been replaced.
Since it is as comfortable to use as the OEM Product to date, we purchased the same one.
View detail
Fits: HONDA FORZA Z SPECIAL, HONDA FORZA Z, HONDA FORZA Z
Compatible car models are different.
It is for MF08, though it is listed as MF06.
The product Package clearly states MF08, so Mr. WeBig is wrong.
I could not use it because I bought it for MF06.
View detail
Fits: YAMAHA Grand Majesty 400, YAMAHA Grand Majesty 400
Reasonable price
Cost-effective. Reasonable price. very durable. Significant effect. save oil and speed improved, Recommended Products. View detail
Ordinary Belts
It claims to be a reinforced belt, but it's just a regular belt.
This is my second purchase because the price is cheaper than OEM Product.
It has been replaced at 20,000kmMeter and there has been no Trouble in that time.
I used a no-name Chinese one before and it went bad after a few thousand miles, the Belt is a critical Part, so you'd better use a reliable Manufacturer or OEM Product!
I have also used DAYTONA products, but in my opinion, OEM products are the best for durability and product accuracy. (But HONDA is expensive!)
View detail
Less expensive than OEM Product and satisfied
Unlike Yamaha's Pulley, Honda's Pulley with GEAR was difficult to remove.
I don't have an Impact wrench, so I fixed it with an ASTROPulleyHolder, but
I used a 22mm 1/2-inchesSocket wrench and tried to turn it with all my might.
Once I got out of GEAR in the middle of the game and hit the CellMotorPinion holder with momentum.
The Holder was partially broken. I've changed Holder to Quantity:Set it again.
I managed to get it off, but I had to remove the Clutch to get the Belt off.
I wanted to get the Impact wrench.
The tightening torque is 108N-m on the Pulley side, and 108N-m on the Clutch Side. ： It is said to be 49N・m.
OEMBelt is also quite cracked and is replaced immediately.
I compared the widths and there wasn't much difference.
After accelerating to a certain speed and then stopping, the gurgling sound before the replacement
It is much quieter after replacement.
Same OEM Product (16g) I replaced the WeightRoller with a new one, and I thought the behavior would be the same, but
I think it's faster to reach the maximum speed because of the increased width inside the Belt.
I'm going to open the Case after about 1000km.
View detail
Fits: YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 250 (4HC)
Over the limit of use at 7000km
I went over the limit of use at about 7000km.
Inside the case, cotton candy made from the thread used in the Belt was flying around, and it was blackened with Belt scum.
Belt shavings were removed with a quick rinse, but the cotton candy got tangled up in the BALI of each section and was a pain to clean.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
As an alternative to OEM
I used it for CYGNUS X
If there is any wear and tear, it should be replaced at the same time as ClutchMaintenance
I don't know about the performance, but it's Belt, so it's good as long as it's durable
Size is the same as OEM, etc
View detail
Fits: HONDA clair-scoopy, HONDA clair-scoopy, HONDA SmartDio, HONDA SmartDio, HONDA byte
Great for competition
It is much thinner and lighter than the OEM Belts
It's great for use in scooter races because the weight reduction in the rotating parts helps to improve acceleration I think
As for city riding, the Belt is thinner and can take the same load in the same small area The wear on the Pulley side (rather than the OEM's) is much greater than the durability of the Belt itself I am slightly concerned that this will be promoted
I haven't had any noticeable symptoms after about 2000km of use, so it may be hard to get rid of it
View detail
![Gates [Gates] Scooter Belt](https://img.webike-cdn.net/catalogue/images/21528/rk-1132sv_01_TS.jpg)
The price is the best
It is the cheapest of the Kevlar type of Aramid fiber
Performance is fine
I think the price is relatively high for this Site
It's a product that comes in a package and is safe to use
View detail
Fits: YAMAHA Grand Majesty 250, YAMAHA magsam (var. of mushroom), YAMAHA magsam (var. of mushroom)
It is nothing like OEM
MF 08 Used for FORZA
Exchange at about 59,000 km
I did not turn it much because about 1000 km ranking as break-in.
Noise due to exchange and etc. etc. Not at all
Speed ??glue at high speed etc. No change
Installation etc etc. I asked him at the Motorcycle shop, so I do not know.
Especially nothing was told.
It's about 81,000 km in less than 3 years from that but there is nothing wrong with it.
Well, it seems to be running fully open immediately after exchanging Belt...
I do not know if it is really reinforced,
For now it's the same as OEM. It can be used for.
I'd like to change it if I use 25000 km.
View detail
Fits: YAMAHA Majesty 250 (SG20J), YAMAHA Majesty 250 (SG20J)
goo
Total fit for my YP250. It fits snugly and well. I will recommended this as gates is a good manufacturer! Price is fair as well. View detail
Fits: SUZUKI Sky Wave 400, SUZUKI Sky Wave 400
Half price of OEM?
Purchase for CK 42.
I purchased it for RefreshMaintenance. I think that COSPA is good as it is about half price of OEM Product.
After that, I bought it for the first time this time so I look forward to the future durability.
Because it is cheap, I am glad if you bring it there so much!
View detail
Fits: SUZUKI Address V50 (4-stroke), SUZUKI Let's 4, SUZUKI Let's 4 Basket, SUZUKI Let's 4 Basket, SUZUKI Let's 4 Palette, SUZUKI Let's 5, SUZUKI Let's 5G
Durability is difficult
Third impression after use. At 9 thousand kilometers, there are many cracks, whether it is the usage limit or not. It says that 20 thousand kilometers, but it seems there is not it for a moment. It was the same result for 3 times. Because I felt uneasy because I used it by commuting, I returned to OEM this time. Even if it runs out of running it will not allow traveling Large Let's go for optional insurance as durable w View detail
Fits: YAMAHA Basic JOG [JOG] 03, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA jogpochet, YAMAHA Super Jog ZR, YAMAHA vino, YAMAHA Remote control jog
It is different from other companies...
ProductNo : RK-3331SV I have not installed it yet... Rather than say... It is clearly different from V Belt of other companies that Belt is light weight! Is it good or is it bad? It feels like it is not durable somehow.
I think that it is not accurate, but when we measure the circumference of Belt...
RK-3331SV is [795mm]
OEMBeltProductNo : 3 WF - 17641 - 00 [790mm]
DAYTONAProductNo : 31596 is [798mm]
KN Planning ProductNo : 7020-M-SS is [800mm] So it is somewhat longer than OEMBelt...
Also, different from other companies Belt, Belt inside is "cloth" is.
Unlike Belt from other companies, RK made cloth, so is this making really good or bad? I do not know because I do not use it, but I do not think I want to wear it at the moment right now.
Someone's mounting review (durability) I would like to think about wearing after watching.
View detail
Good the Belt of "RK" better then Belt of "Bando" Good Japanese quality, Cheap price, There is Manual with specification.
Good the Belt of "RK" better then Belt of "Bando" Good Japanese quality, Cheap price, There is Manual with specification. View detail
Fits: YAMAHA Grand Majesty 400, YAMAHA Grand Majesty 400
Is the durability proportional to the Gold amount?
I was attracted to the amount of gold about half of RK Brand and OEM Parts Number and purchased it. I was concerned about the narrow Belt width compared to the OEM, but I trusted the optimum design for the Package Instruction Manual and wore it. Unfortunately I did not have 10000 km. I started to slide on the uphill acceleration at 8000 km. Belt does not slip on a flat Accelerator operation on the flat, but if it is suddenly accelerated Belt's squealing sound is heard and acceleration gets dull. Do you lose to 400 cc Torque?
For my Motorcycle, as for Belt, after all OEM Product seems to be good.
View detail
A little thin
【What made you decide the purchase?】
Because it is a product of RK with a reputation as ChainManufacturer and the price was cheap.
【How was it actually used?】
The texture is also close to the OEM, it can be used without problems, but I am worried about durability because it is a little thin.
【Was it difficult to install? (Hard parts case)】
Easy, you need special tool to remove Pulley and Driven.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Set to Drive shaft before Pulley and Boss, hang Belt on Driven, open it, drop it a little and set it to Driven Shaft, then Belt will hang more easily on Drive shaft side.
[Is there anything I was disappointed about?]
A little narrow width.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want you to describe dimensions as well as compatible models.
【Have you compared items?】
OEM Product (4KN-17641-00)
OEM Product has a width of 16. 5 mm Meter and a bit thicker than this.
[Others]
In case of Minarei Engine, OEMBelt is 3AA - 17641 - 00 ProductNo (16. 5 × 750), but even this Normal pulley is so short that Driven may have bottom, so this 4KN-17641-00 ProductNo equivalent (16. Belt of 5 X 760) is recommended.
By the way, even among 4 KNGEAR, the Second Type Model since 2003 (Commonly known as GEAR C) Belt of 4KN-17641-10 and ProductNo in the last two digits are different, it seems to be a short Belt of almost the same size as 3AAProductNo, so it is a caution.
For HardTuner who are seeking longer Belt, Peugeot - Belt of Speed ??fight (17. I will tell you about 5 X 765.
View detail