Reviews
Fits: HONDA Superdio, HONDA New Tact S TACT (AF31), HONDA New Tact TACT (AF30), HONDA Gyro UP Initial TB50MF (TA01) Initial, HONDA Gyro X Medium Term NJ50MDL|DN|DP|DR, HONDA Giorno GIORNO (AF24), HONDA Super Dio SR Dio (AF28), HONDA Super Dio Baja Dio (AF28), HONDA Dio Dio (AF18-1075938-), HONDA Livdio Dio YA|J|2J|4J|6J|7J|8J (AF34), HONDA New Tact S TACT (AF31), HONDA New Tact TACT (AF30), HONDA Gyro UP Initial TB50MF (TA01) Initial, HONDA Gyro X Medium Term NJ50MDL|DN|DP|DR, HONDA Giorno GIORNO (AF24), HONDA Super Dio SR Dio (AF28), HONDA Super Dio Baja Dio (AF28), HONDA Dio Dio (AF18-1075938-), HONDA Livdio Dio YA|J|2J|4J|6J|7J|8J (AF34)
Used on a 1985 A-AF09Courreges TACT
I was wondering which parts would be best for my old Scooter, as I didn't have much information on it, when I noticed that Webig's WebigSupport was available. I was assured of my purchase because I received a reply with the product details, including width, length, etc., and the corresponding OEM parts number.
The only problem was that there was no direction of rotation for the belt.
The feeling of running was still pleasant and comfortable without the anxiety of when it was replaced on an old Motorcycle.
I can't confirm the durability of the product since it has just been installed, so I gave it 3 stars.
View detail
Not bad, but...
It is made harder than OEM, or it wears down the Pulley side more than the Weight Roller.
You may want to apply a thin coat of MolybdenumPaste.
View detail
Belt of Address
I'm not sure how durable it is because I've only ridden it for about 1000 miles, but I've used it with no problems.
I also opened the cover and inspected it, but there is nothing wrong.
It's a good product to replace Belts by yourself.
View detail
To restore Scooter's acceleration!
I used it for maintenance of my moped Scooter (SMARTdio).
It originally had an OEMRoller in it, but the standard wear had progressed to the point where the core of the Gold genus was almost exposed.
The product has a polite size and weight (16*13mm) (6g) is printed on it, which is nice.
If you want to change the Setting, you should be able to use the different weight of the Series, H16×13.
https://www.webike.net/tab/parts/bm/1155/br/556/?q=H16
Oh, great! The line up is from 5Gram to 13Gram in approximately 0.5g increments.
I'm tempted to try changing the weight in the future to adjust the balance between acceleration, fuel economy and top speed. And it's cheap!
According to ManufacturerSite, the weight part is made of copper, iron and carbon fiber powder with JAPAN resin, and finished with high temperature and wear resistance with a melting point of 750℃. According to the ManufacturerSite, the weight part is made of copper, iron, carbon fiber powder and JAPAN resin. The resin part is made of glass fiber and Teflon to enable smooth movement. The black color is probably due to the material.
If you believe the claims, you would expect them to do a better job than the OEM same etc.
When assembling, I applied a thin layer of Molybdenum grease to the belt and Pulley face.
View detail
Good rollers 7 grams for Suzuki ZZ
Excellent rollers to replace the original ones, which weigh about 8.5 grams, the quality is good, they are inexpensive, I did not find any problems with molding plastic, they do not get stuck in the variator, the size is perfect, made in Taiwan, but very good, the metal does not separate from the plastic, I hope that they will last a long time, I already use about 1500 kilometers, I don't see much wear and tear ---------------------------------- ------------ Excellent to replace the original rollers, which weigh about 8.5 grams, good quality, are inexpensive, no problems with the molding plastic is not found, do not get stuck in the variator, the ideal size, made in Taiwan, but very good, metal is separated from plastic, I hope that will last a long time already use about 1,500 kilometers, excessive wear and tear is not visible Powered by Google Translator View detail
Good videos
The rollers are of average quality, they are cast evenly, I did not measure the difference in weight from roller to roller, but the weight corresponds to - 7 grams for Suzuki ZZ, in general, very budget variator rollers that look very decent in the hands, I advise --------- ------------------------------------- Medium quality videos, cast smoothly, the weight difference from roller to roller is not measured, but the weight corresponds to - 7 grams for Suzuki ZZ, in general, very low variator rollers, which are in the hands look very dignified, I advise Powered by Google Translator View detail
Seriously cheap.
This is really cheap. There was a store that carried this until a while ago, but it seems they no longer carry it at all. The good thing about this WR is that it's cheap, so it's easy to get a good setting out of it. You can buy several and try various things. Also when you want to save money on consumables. It is useful. I am thankful for the poor life. View detail
You're okay with it if you can trade yourself
It's a commuter vehicle that has only touched the weight roller
If you're a do-it-yourself replacement person, you can run about 5,000 miles
No problem
Once it goes 10,000 miles, it's a burst (Lol)
At least 8,000 kilos
Cost performance is good
View detail
inexpensive and good quality
It's a Repeat, inexpensive but durable, I've driven 2000km Meter! but it didn't have much wear I think it's a bargain View detail
Good
Good repair rollers. not bad quality so u can use this one and dont be worry. used in friend's suzuki zz instead original rollers. all good! View detail
good rollers
use this item for replace original suzuki weight rollers. i got a good quality product and better acceleration on my bike View detail
Fits: HONDA Today AF61, HONDA Today AF67, HONDA clair-scoopy, HONDA Gyro Canopy TC50Y, HONDA Smart Dio Dio, HONDA Smart Dio DX Dio, HONDA Smart Dio Z4 Dio, HONDA Byte BITE, HONDA Today AF61, HONDA Today AF67, HONDA clair-scoopy, HONDA Gyro Canopy TC50Y, HONDA Smart Dio Dio, HONDA Smart Dio DX Dio, HONDA Smart Dio Z4 Dio, HONDA Byte BITE
Disintegrated after one month
I bought it because it's cheap. As i received the prpduxt i thought it could have been a good alternative to tl origibal belt. It did look fine. Nevertheless after just a month the belt exploded...and we're talking about a not tuned 50cc. I don't know if it was just mine or all the belt of this kind are like it View detail
Fits: HONDA Today AF61, HONDA Today AF67, HONDA clair-scoopy, HONDA Gyro Canopy TC50Y, HONDA Smart Dio Dio, HONDA Smart Dio DX Dio, HONDA Smart Dio Z4 Dio, HONDA Byte BITE, HONDA Today AF61, HONDA Today AF67, HONDA clair-scoopy, HONDA Gyro Canopy TC50Y, HONDA Smart Dio Dio, HONDA Smart Dio DX Dio, HONDA Smart Dio Z4 Dio, HONDA Byte BITE
Almost unchanged for SUPER DIOZX.
It was about 10 mm longer than Belt length of SUPER DIOZX's OEM Product so I bought it with expectation for the fastest growth but it was unchanged from OEM Product. It is enough as an alternative to OEM Product. View detail
It can be used normally - - -
The price was also cheap and the texture was not bad, and at the time of NORMAL we were able to run as normal as 1000 km.
,!, Only 3% Tension goes up DAYTONA's Reinforced Spring (Yellow color)
It was cut off at 800 km after installation.
If you use NORMAL it might be OK at all
View detail
Frequently Asked Other Company Product
I can use it normally, There is a stemmatic praise evaluation on a certain site, but it is normal to the last.
I use it for about 2 weeks, but I can use it normally.
If you do not set it for a very good acceleration, you can not cut it like any other company product ??
In my case I am Repair Parts of Normal setting so I'm not suddenly accelerating Gasoline food preparation so I will keep it there
View detail
No durability
Only 10,000 kilometers Belt went out and replaced with OEM.
Belt was shattered to 2-30 pieces.
After all, if the driving system is not OEM, it will be stranded in many ways.
View detail
Is it good for Setting?
Only for setting... Is it saying, I bought it for break-in running after Bore up. It is very low as it is a low price. I do not want to wear it after break-in running. Because it is unlikely to have durability... View detail
It was nice when it was NORMAL - - - -
Although I used to patronize for a while after Bore up - - - -
There is no problem if the town using middle low speed is Main, but I made a bore up and twisted the driving system slightly, but it was cut off at high speed twice.
It was a Pattern damaged at high speed after riding thousands of kilometers.
But I understood that the cause is predicted from that. (Maybe)
When driving at high speed Pulley? Etc. It seems that I wanted to go to the outside until I got to the outside but it touched the outer wall of the part covered and it was damaged by friction.
It was pretty much shattered.
It might be better if you made Bore up strengthen Belt - - - -
View detail
It is sufficient performance as OEM's Repair Parts.
I used it for CREA SCOOPY. Since there is no Stopper on the side of Roller, there is a concern that Weight of Gold genus in the center will come out, but it is probably Large durable. Since weight is written on Roller, it is saved without worry of mixing. There was also no error in the weight of each Roller. Because it is cheap, it seems to be easy to exchange as it decreases.
Also, it is safe to buy Roller with different weight in Setting, because it is cheap.
View detail
I purchased it as a backup.
I am using it now..
I am already using 3000 km, but there is nothing wrong.
We bought it because it was Sale target item at SpringCampaign of Big's.
I think I should exchange it after about 5000 km.
Until now, I have replaced various Manufacturer Belts, but this item is the best match.
Pulley and Driven are Chameleon factory and Roller uses six 16 g.
Engine is 156 cc, and we are exchanging with BigSlot and 20 percent Up Injector.
I am planning to visit this Belt in the future.
I'm looking forward to seeing you..
View detail