Reviews
Fits: SUZUKI LETSBasket, SUZUKI LETSG, SUZUKI LETS, SUZUKI LETS5G, SUZUKI LETS5, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, SUZUKI LETS4Basket, SUZUKI LETS4Palette, SUZUKI LETS4Palette, SUZUKI LETS4G, SUZUKI LETS4, SUZUKI LETS4G, SUZUKI LETS4, SUZUKI LETS4G, SUZUKI LETS4
Bypass measures for commuter routes
I've decided to commute on LETS4, but I'm afraid of the fast flowing Bypass.
Since I had already obtained YellowNumber, I built this product so that I could go with the flow at the speed limit of 60?Bypass.
By the way, the maximum speed in Normal pulley is 50?/h.
This product is available in Slide Piece, Weight Roller and Quantity.:Since it is a Set, there is nothing to prepare for Others.
I put it together and the top speed is over 60?/h. The limit is still unmeasured.
The weight roller is 5g, but the engine speed at the start is low, so I will try setting it in the future.
I think I can now commute to work on the Bypass stream with peace of mind.
View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS
Weight Roller for LEVEL10
Quantity of Weight Roller:Pair (for Left and Right) Since there is no difference between
It's GOOD that you don't have to worry about the direction.
Just the weight (g) is listed on the Roller contact surface, so
It's a shame that it disappears after use.
View detail
Fits: SUZUKI Street Magic 110, SUZUKI Street Magic 110, SUZUKI Street Magic 110, SUZUKI Street Magic 110, SUZUKI Address V100, SUZUKI Address V100, SUZUKI VECSTAR150, SUZUKI ADDRESS V100, SUZUKI ADDRESS110
Clutch center spring
It is used for STREET MAGIC 110 and installed in the drive train of almost NORMAL. The gearshift timing has changed and the rise of Curve became Smooth. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S
A brand you can trust.
I can't give you an impression of how it feels because I changed cars before I replaced it, but I think the price is a little cheaper than it should be.
It is well made
View detail
You can cruise at high speed without regripping the Axel.
The Axel feels a little heavier, though.
It's easy to cruise at high speeds without having to regrip the Axel.
From 2019 MODEL to the Injection side
Stopper has been added to the system to prevent it from being fully opened.
The full PowerPulley product is now available in the
Purchase.
View detail
Fits: HONDA READ 125, HONDA READ 125, HONDA PCX125, HONDA PCX125
It comes with a pre-set weight roller set, but...
I bought a Scooter for starters. So I bought a High Speed Pulley.
It's easy to just Replace with OEM Product.
But........the weight roller that comes with the pre-set is too heavy. The shift point must be moved to the high rpm side to some extent for High Speed Pulley, but the shift point does not change than I thought. As a result, I had to buy an additional weight roller.
Well, I think people have their own preferences about this place, so it's just for reference.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BW'S125, YAMAHA BW'S R, YAMAHA BW'S X, YAMAHA BW'S 125
If you want to have fun, this is it!
I was going to replace the CYGNUS Clutch Spring as it seemed to have gone bad, but I didn't have enough tools to take it apart, so I bought it from Assembly.
It wasn't difficult as I just had to replace the original Clutch.
I replaced the Belts and other consumables at the same time when I installed them.
After the run, I changed the Weight weight of the Weight from 9g to 10g, so the anomalies are faster.
I think the top speed is a little slower for that, but I don't think it's due to this product.
View detail
Enhancement. Attracted by the characters.
I installed it on PCX KF30.
About 16,000km on the odometer.
The original Belt width used was worn to the limit of the Manual's usable width of 21.6mm by Caliper measurement.
I could have used the OEM parts for the replacement, but I chose this Belt because of the word "reinforced".
If you look at the Belt Marking, it looks like it can be installed in either direction.
I don't think it's a component that will change the driving performance of Large, so my impressions after using it are normal.
I can't judge the durability of the product without using it for a long time, but I'm hoping for the best.
View detail
It can be hard to tell how well it works.
I installed it by myself. It took me a bit of time to assemble the original Spring, but the installation is rather easy.
Overall, the product is very well made, but there was some BALI left in the indentations in the cutting areas. However, it comes off quickly and cleanly.
I found that the amount of twisting of Axel was reduced to accelerate with less opening of Axel than before.
Most importantly, I like the fact that I can see the Gold Parts near the Engine, which makes me feel like I'm playing with it a bit.
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA Sh mode, HONDA PCX125, HONDA PCX125, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA LEAD125, HONDA LEAD125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, Others KITACO Power driveKIT 489-0420000 (for MAJESTYS)
I think it's good.
For those of you who are wondering how to choose a weight roller
There are various weights available from various companies, so I chose this one based on Net Information and Brand.
The acceleration and extension are both good.
The OEM felt abnormal and replaced it early and it was deformed and cracked after only 6,000 miles.
Reference.
( *´・ω)/(; )
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX160, HONDA LEAD125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S
It's durable enough and accurate enough And I like that it's not front and back
Introduced to refresh the drivetrain of commuting vehicles
The base Pulley is the same Daytona High Speed Pulley The exhaust system has been replaced this time, so the 8gQuantity, which is 0.5g lighter than the previous one:Set
I am Large satisfied with the targeted shifting timings and better low and mid range acceleration
The nice thing about the Daytona Weight roller is that there is no direction of rotation For me, I often make mistakes and I'm a careless person and a worrier, the face/ura is Just the absence of it makes a huge difference in workability
One drawback I feel is that this Weight roller has a lot of dust The inside of the pulley case is covered with scrapings If you are a person who can disassemble the pulley case frequently, it is good should be cleaned up properly when you refresh
View detail
Probably Number One on a Pulley outside the V100
I used it in the first semester of the 100T in CE11A
There is no interference, but there are only 3 missing Washer cards
At 85 kg human
The V100 is all OEM and the Center spring is also OEM and can go up to about 82km/h Then it will come out pleasantly, but beyond that it will be Weight roller and weight
Mid-range acceleration and initial speed is a little bit lower than Peak and it feels like it's going to run very still
Fuel economy will be reduced
Up to 60km or so, it was right up there with Limit4st
Quantity:In the set
Slide Piece 3 pieces
? Weight Roller 6 pieces
Pulley
・Clutch center spring
WasherQuantity of Pulley Nut:1pc.
Washer 3 pieces for Kick gearOffset
is included
I don't know the difference between the Pulley itself and the Large size, but the shape of the Belt is not the same I'm enjoying it now without the Center spring replacement in
There is no groove in the center hole of the Pulley to store grease, so be careful not to run out of grease
If it doesn't move even if you paint Grease because the Slide Piece is tight, you can use File Should I guess?
Center spring is longer and thinner than OEM, but it will be firm If you use the OEM Engine Displacement Volume, you will feel that it rotates too much I want a softer Center spring than the OEM
The weight roller can be used for special This is a size that is probably not available in Japan Please be careful
There is information that Dio110's Φ18×14 is appropriated, but it is not certain Please provide information on the weight roller diversion
Washer for Pulley stopper is included
Tightening the Pulley with Nut from the outside creates a gap, so I used it there (Reference manual required)
The GEAR cum Nut that stops Pulley is Offset outside, and Kick gear is Offset, so I put it in the back of the 3 screws, but I can't use the kick back I made the number of Washer 6 in total (Reference manual required)
The instructions are in Italian, of course
At the top of the page is the basic construction, and around the middle of the page is a special The instructions on how to assemble it are written in the book, so please observe the photos carefully
If you have any information on diversions, please let me know
View detail
Expect durability!
I bought it for replacement for the ADDRESS110 (CE47A)!
I decided to buy based on the reviews
I'm currently using it and expect it to be durable
If it's durable enough, I'll buy it again next time!
View detail
Fits: YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Majesty S, YAMAHA Cygnus X
Mostly satisfied!
There is a difference between OEM and Large I recommend you to change the Slide Piece frequently because it is quite worn and rickety
The texture of plastic is indeed DAYTONA I checked it once after 800km There were no problems with it, no problems with
I would recommend this product
View detail
Fits: YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X FI, YAMAHA CYGNUS X, YAMAHA Axis Treat, YAMAHA BWS125(BWS)
FOR JAPAN MODELCYGNUS RECOMMENDATION the introduction!
It is used for FOR JAPAN MODEL CYGNUS X SE44J Type 3 The acceleration is very good But to be honest, the quality of the Weight Roller that comes with it is not so good It has been replaced with the Yamaha OEM Weight Roller View detail
Fits: SUZUKI ADDRESS110, SUZUKI ADDRESS V100, SUZUKI STREET MAGIC, SUZUKI VERDE
NBS weight rollers
Item received in good condition. packaging is very good. I have not yet try yet the item. Maybe can give me some tips what will be my first base line weight combinations? One thing confused me, how come the packaging label as made in taiwan? View detail
Fits: YAMAHA BWS R2JS Taiwan, YAMAHA BWS 125 Type 2 BG1FOR JAPAN MODEL, YAMAHA CYGNUS X 5-inch B2J Taiwan, YAMAHA CYGNUS X 4-inch 2UB Taiwan, YAMAHA CYGNUS X 4 type BF9FOR JAPAN MODEL, YAMAHA BWS X46P, YAMAHA BWS 1255S9, YAMAHA CYGNUS X 3 Type 1MS Taiwan, YAMAHA CYGNUS X 3 Type 1YPFOR JAPAN MODEL, YAMAHA CYGNUS X 2 Model 4C6 Taiwan, YAMAHA CYGNUS X 2 Type 1CJ Taiwan, YAMAHA CYGNUS X 2 Type 28SFOR JAPAN MODEL, YAMAHA CYGNUS X Type 1 5TY Taiwan, YAMAHA CYGNUS X Type 1 5UAFOR JAPAN MODEL
I think it's good
The OEM Nut is also a good price
I found what I believe to be the KN Project Enhancement Pulley Flange nut
I bought it as a replacement
Well, it's exactly what it looks like
It could be a good comforting charm for you
View detail
Fits: YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Jog (2 cycle), YAMAHA Vino (2-stroke), YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Super Jog ZR, YAMAHA Super Jog ZR, YAMAHA Axis 50, YAMAHA BJ, YAMAHA BJ, YAMAHA Apprio, YAMAHA Apprio, YAMAHA Axis 50, YAMAHA Jog Aprio Type 2, YAMAHA Jog Z, YAMAHA JOG-EX [3YK1-5]., YAMAHA JOG-EX [3YK1-5].
I've started to shake off the Meter
I bought it used with 7,000 miles on it The top speed was a bit before MeterFull scale
I went to WayBig to check out the parts to replace the belt and I chose this one I used a special tool to replace the pooch Lee lock safety belt and the Impact I used a wrench When I built it up and tested it, it was a big ri The highest speed shook off the Meter I don't know whether the new Belt or Pulley worked, but I am satisfied with Large
View detail
OEM
I bought and replaced the Drive face and Belt of the same series at the same time
It looks like an OEM so there's nothing wrong with the installation and replacement
I think it would be more expensive to order OEM from a proper Shop, so if you want to replace it yourself, this is the one for you I recommend it
I don't think there will be any change in performance or anything else
View detail
Fits: YAMAHA Remote control JOG [JOG]., YAMAHA VINO [Vino]., YAMAHA JOG [jog]., YAMAHA APRIO [APRIO]., YAMAHA APRIO [APRIO]., YAMAHA BWS [Bewith] 3AA, YAMAHA BWS [Bewith] 5DA, YAMAHA JOG [JOG] Sport 3RY2, YAMAHA JOG [Jog] Sport 3RY1, YAMAHA Super JOG-ZR [JOG] 3YK7-9, YAMAHA Super JOG-ZR [JOG] 3YK7-A, YAMAHA BWS [Bewith] 3AA, YAMAHA BWS [Bewith] 5DA, YAMAHA JOG [JOG] Sport 3RY2, YAMAHA JOG [Jog] Sport 3RY1, YAMAHA Super JOG-ZR [JOG] 3YK7-9, YAMAHA Super JOG-ZR [JOG] 3YK7-A
Good with OEMPulley
I used to use the OEM Pulley face with the boss side machined, but I got tired of it sacrificing low speed for Then I bought this product
The low speed was a little better, but the mid-range and high speed range was better It was a good purchase because I didn't expect to get so much success with the Body
However, the Face of BMF in general is not as strong as other products because of the strength of the Face The build is thick, so be careful when adding Washer
View detail