Reviews
Fits: HONDA XE, HONDA GIORCUB, HONDA TL, HONDA JAZZ, HONDA R&P, HONDA CY50, HONDA Ape100, HONDA Ape50, HONDA CB50, HONDA MONKEY R, HONDA DAX, HONDA MAGNA50
Recommended
Recommended!
I made a small size while restoring!
Cheap and cosy!
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
I wanted more Speed so
I think it's good. Down from 40 to 35. View detail
สเตอเบอร์นี้เป็นเบอที่หายาก น่าจะมียี่ห้อเดียวที่เล็กสุด View detail
Cool ??
Cool, but ...
It is expensive….
I considered XAMetc. but they didn't have it in stock, so I bought this one, which was in stock.
View detail
Fits: KAWASAKI KLX110, KAWASAKI KSR110, KAWASAKI KSRPRO, KAWASAKI Z125 PRO, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KLX110, KAWASAKI KSR110
To Sprocket, which was a KSR rag for commuting.
It was replaced with a KSR110 SPRO that was too ragged.
Front is a 14T combination.
The running noise was dramatically quieter, although this was due to the fact that it was a rag.
Fee Ring is also perfect.
This is partly because it is common with the Z125, but I appreciate that they are still offering it for the KSR as well, while other manufacturers are discontinuing it.
View detail
Fits: KAWASAKI KLX110, KAWASAKI KSR110, KAWASAKI KSRPRO, KAWASAKI Z125 PRO, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI KLX110, KAWASAKI KSR110
The Engine is quiet on the level ground.
It's a Z125pro with basic commuter use and flat ground.
I used it in combination with the Driven Sprocket 14T.
The Engine noise was not too loud for cruising on flat ground, and the vibration was low and easy.
However, start acceleration and hill climbing ability will still be slowed down.
You need to be proactive and use 3rd gear and sometimes 2nd gear as well in mountain passes.
A lot of stop and go may worsen fuel economy.
This area depends on the environment and preference.
View detail
Fits: HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA solo, HONDA BENLY50S, HONDA CL50, HONDA SUPER CUB 50, HONDA LITTLE CUB
I installed it in the SUPER CUB.
I installed this because I wanted to make it high geared because Torque is strong but it vibrates at high speed.
Smaller diameter Sprockets seem to be structurally impossible.
Quality Sprocket.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA glom, HONDA MONKEY125, HONDA MSX125, HONDA MSX125 SF, HONDA CROSSCUB110, HONDA DAX125
I bought it for the CUB
I bought a Cub Pro that will soon reach 40,000km and I also changed the Chain because it was lazy.
I've driven another 10,000 miles from there with no discomfort and no problems.
I'll choose this one for my next exchange.
View detail
I'm glad I bought it
The smallest number of SmallestT for MONKEY to swing long without changing the mission In the case of a tuning engine, this product is recommended to be used in Takagawa's Manual I've been using the 25T, and I think it's gotten even better By the way, I'm using 17T for Front By the way, the Engine is 81.2CC View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA glom, HONDA MONKEY125, HONDA MSX125, HONDA MSX125 SF, HONDA CROSSCUB110, HONDA DAX125
SP TAKEGAWA (SPECIAL PARTS TAKE DRIVEN SPROCKET)
SP TAKEGAWA (SPECIAL PARTS TAKE DRIVEN SPROCKET) fit to my GPX Demon, just plug and play. Good quality price reasonable. I like it so much. Received an email earlier regarding unavailable stock and estimated date of shipment is around January 09, 2019. At last WEBIKE shipped out before one month the time they given. The sprocket came with a piece of Takegawa sticker, FREE. Good seller... View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
Speeding up - It helps low rotation
I also thought about Mission's 5 speed with LITTLE CUB's up to 108 ?, but because it was troublesome to Rose En Rose and its reputation for durability was also mixed, I changed the secondary reduction ratio. Rear sprocket has the smallest available SmallSize is 30T and Front is the largest Large 17T. It is 91 at 8400 rpm. / h and this is enough for Touring. Since Wheel base is short in the first place, it is 60 to 70? / It is easy to cruise by h. The slope will also climb easily with Top gear unless it is in a steep slope. Reduce the number of revolutions View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
The only 30T
I used it for Final adjustment with Iron CUB's Bore up.
It is the only 30T for iron CUB.
I thought that around 33 T would be ideal if possible, but 1 TS mall of Drive side
We responded.
The texture is pretty good, KITACO does not become a ratio.
* KITACO also has a very good texture compared to the price. This Sprocket
It means that it is even above that.. Just in case.
ChainNoise has decreased as processing accuracy is good.
Wear resistance is still unknown because 2000 km is not used, but than OEM
I'd be happy if you bring it..
There is not much to tell you up, but as I mentioned earlier on Lineup
It is Neck with the smallest being Large. The rest is price. Mr. Mukawa, there was NORMAL before
Please resurrect the cheap Sprocket of Type!
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
Purchased for LITTLE CUB
Medium, I tried to buy it because the high speed growth was not good.
Evidently better growth than before, even easier to run on the ascending slope. Although I do not know the durability yet, I became able to run comfortably as a personal opinion.
View detail
Fits: HONDA NS-1, HONDA NS50F, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD, Others
It decided for a pure sprocket to also surpass 10,000 K, and for decrease of a mountain to be also conspicuous, and to exchange together with a chain. Although sprockets gaily, such as gold, were also considered, if the dirt of a low price and a sproc
It decided for a pure sprocket to also surpass 10,000 K, and for decrease of a mountain to be also conspicuous, and to exchange together with a chain.
Although sprockets gaily, such as gold, were also considered, if the dirt of a low price and a sprocket probably is not conspicuous, it will equip with this. Since it is slovenly human being, cleaning is mend KUSAI. Although it is steel,
having a chic feeling that a high grade feeling is considering a price and appearance also differs from gold -- good -- I consider -- since it is the same folio number as pure, it is natural, but the riding taste of a feeling etc. are the same.
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
a cub -- it used for 90CM. In order to reduce from standard number of sheets (39T) to four breath, it was slightly anxious at first. However, the First gear which was not able to be used at all comes to be extended dramatically, and came to be con
a cub -- it used for 90CM.
In order to reduce from standard number of sheets (39T) to four breath, it was slightly anxious at first.
However, the First gear which was not able to be used at all comes to be extended dramatically, and came to be connected very much with a smooth to the Third gear.
It is whether although the maximum high speed is an 80-km stop, its weight has a cause there --
Although it thinks that the elongation of the Third gear fell just for a moment, on the whole, they are very satisfaction and recommendation.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA
I think that a price is also cheap and enough for practical use. Although it is simple, it is liking individually.
I think that a price is also cheap and enough for practical use.
Although it is simple, it is liking individually.
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
It was used in order to change a moderation ratio and to suppress acceleration by the benly 50S. Although there is no hole for a weight saving as of April 10, 2009 with the photograph here, there is a hole the normal 42T and like [ company / 30T ] act
It was used in order to change a moderation ratio and to suppress acceleration by the benly 50S.
Although there is no hole for a weight saving as of April 10, 2009 with the photograph here, there is a hole the normal 42T and like [ company / 30T ] actually.
If the engine is normal, a front may not be run unless it can enter 12T.
Since he has not tried except 12T, it is what...... It is necessary to reduce a little chain again depending on the case.
As operative, it is a weight saving of axle part.
The increase in the maximum high speed, reduction of accelerating force.
With it, there is an unexpected thing of becoming difficult to become dirty as operative.
Since the chain case of normal is made according to 42T size, if the chain oil which scattered gaily and was soiling the number plate when normal exchanges for 35T, it is effective in being obstructed by the case and becoming difficult to scatter.
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
Is reinforcement increasing from the pure thing? Although it is not understood, as for appearance, a division exception does not stick that it is pure. What was necessary was just to have struck the stamp of TAKEGAWA something after ?, if it was bette
Is reinforcement increasing from the pure thing? Although it is not understood, as for appearance, a division exception does not stick that it is pure.
What was necessary was just to have struck the stamp of TAKEGAWA something after ?, if it was better to have used the metal color and to give fashionability. -- Regrettable.
It is a sprocket ordinary functional completely ..
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50S, HONDA solo, HONDA CL50, HONDA SUPER CUB 50, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50
If it is the same size, he can buy it cheaper than the equivalent device of a kitaco. since finishing is also Mukawa, it is satisfactory -- it is . In a benly and the bore up vehicle of a cub, I think that it becomes an indispensable size.
If it is the same size, he can buy it cheaper than the equivalent device of a kitaco.
since finishing is also Mukawa, it is satisfactory -- it is .
In a benly and the bore up vehicle of a cub, I think that it becomes an indispensable size.
View detail
Fits: HONDA NS-1, HONDA NS50F, HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE TypeD, HONDA APE 100 TypeD, Others
It is used for NSF100. Since many things are tried according to a course, the product made from steel which cannot decrease easily is recommended in the beginning!
It is used for NSF100.
Since many things are tried according to a course, the product made from steel which cannot decrease easily is recommended in the beginning!
View detail