Reviews
Fits: HONDA NSF100, HONDA NS50R, HONDA NS-1, HONDA NS50F, HONDA APE 100 TypeD, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Rear Sprocket replacement
The Rear of the installed product seemed to be getting a little sharp, so I bought this new one to replace it with a new one along with replacing the Chain with a new one.
The price was not that much, which was helpful.
It looks Black and does not look bad.
View detail
Fits: HONDA APE 100 TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR50, HONDA NS50R, HONDA NSF100, HONDA NS50F, HONDA NS-1, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Affordable Trial
Prepared for the expedition.
When going to an unusual Circuit, it is often necessary to change the final gear ratio by changing the number of Sprocket Dings.
In many cases, it is a gamble, and it is rarely decided in one shot.
So, it is good if you can read the number of hits to some extent (e.g. information from regulars), but if not, you have to run and test it by yourself.
This time, compared to the usual Home, it will be a large width and high speed course, so it is almost impossible to predict how many pins will be used.
Material:The lightweight Aluminum Sprocket is obviously better, but I don't want to waste money buying a bunch of products that I don't know if I will use in the future, so I always use the Iron Sprocket made by KITACO to test it.
Strictly speaking, the heavier weight will have some effect on the driving characteristics, but I don't have that SEVERE sensitivity, so it's not a problem lol.
I was too Long for the results lol.
Still, it is useful for TEST purposes for the future.
View detail
Fits: HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50
For maximum speed UP!
Since CUB's Engine is limited, I aimed to increase the maximum speed with Final. The effect is so-so. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
jc92 grom needs large size screw hole.
[How is it used?
Cannot be pimped.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Screw holes need to be machined to increase the size of the SprocketBolt on the Type 3 Grom.
How was your experience with it?
I changed my mind. Looks better than NORMAL!
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
I can't wait to get one for the Type 3 jc92 Grom.
View detail
This sprocket needs more strong packaging.
I received this sprocket with broken packaging. It was placed vertically in the box. It seems that the package was damaged because it could not bear shock and the weight of the sprocket during transportation. So, stapler pin on the packaging caused a lot of scratches on the product. I know it does not make problem. But, it look so bad. Please do not place vertically in the delivery box. View detail
Fits: HONDA Ape 100, HONDA GIORCUB, HONDA JAZZ, HONDA CHALY 70, HONDA CHALY 50, HONDA APE 50, HONDA XR80, HONDA XL80, HONDA XL50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA CB50, HONDA MAGNA50, HONDA MONKEY RT, HONDA MOTRA, HONDA Nauty Dax, HONDA DAX70, HONDA DAX, HONDA MONKEY R
If you're in trouble, this is it
KITACO KITACODriven Sprocket (Rear) has arrived and I'd like to give you a quick in-play of how it feels to use it
As far as usability goes, I think it's safe to say that it's neither acceptable nor unacceptable
Maybe there are better products out there if you look for them, but as I am now
I'm under the impression that it doesn't have to be such a high quality product
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
It's wearing out faster than I thought
I was able to get about 1 to 12,000 miles on the OEM, so I thought I could run more, so I changed it out
In combination with the Chain made by Enuma, it wears out after about 8,000 km of driving, and the OEM Product used before I put it back on
Next, Rear sprocket will be an OEM Product
View detail
Fits: HONDA NSF100, HONDA NS50R, HONDA NS-1, HONDA NS50F, HONDA APE 100 TypeD, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Please be sure to check
I thought it was cheap !! I bought it without confirming it well.
Drum brakeSpec of APE 100. Parts that are not compatible with cars.
This was Type D or for Disc Brake.
Failed failure.
View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA BENLY50CD90, HONDA SUPER CUB70, HONDA BENLY50CD50, HONDA BENLY50S, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CL50
Cospa has no complaints.
It is an old Motorcycle made in 1987, but it was saved by partly inventory and delivered on the day and incredible quick response. As for parts, there is no problem with KITACO quality. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
It feels light and good ... but
When exchanging Chain, it was CUB I bought in second hand, so I thought if I had a big problem Sprocket also exchanged at the same time. Size is 34 in OEMSize.
I thought that it became light and I decided to feel good during the installation, but eventually everything was hidden by Cover ....
However, although I intend to install it carefully, somewhat unevenness appeared.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
It is different from what it looks like
Chain was replaced with a new one so I exchanged Sparcket of Rear and Front at the same time.
Although it had not decreased yet,
I changed it for sure, but it was a correct answer.
If you return in the tensioned position of the same Chain - - -.
It is said that things like saying it was decreasing by that much.
It seems to be better to judge by distance and not judgment of just appearance.
KITACO's Sprocket thinks that COSPA is very good for what it considers as cheap and expendable items.
Just as it is cheap, GEAR's frog is terrible.
I would like a bit more firm BALI acquisition.
I poked Small on the side with a copper rod, but it just got scratched.
I think that it was written as a quenched product, but it is soft for that - - -.
I was slightly surprised.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
KITACO Sprocket MONKEY Rear
It's Reasonable and it's solid making so CUB - BENLY - I constantly patronized by 3 units of MONKEY.
This time, Engine - Mission's Spec. I bought it for seeking what T to change for change.
I'd like to buy a Duralumin Sprocket if I decide what T to try.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA little cub, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA BENLY50S, HONDA SUPER CUB70, HONDA CL50
KITACOKITACO Driven Sprocket (Rear)
KITACOKITACO Driven Sprocket (Rear) 42
It is attached to the CUB 90 and is cost effective
The color is also Black, soiling is not conspicuous and a convincing item
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
[Webike Monitor] It is 34T of SUPER CUB 110 (JA07) standard folio number.since the Driven sprocket of pure wearing was inexpensive at the Sale when it thought that Drive sprockets would be exchanged and it would try change of a secondary mode
[Webike Monitor] It is 34T of
SUPER CUB 110 (JA07) standard folio number.since the Driven sprocket of
pure wearing was inexpensive at the Sale when it thought that Drive sprockets would be exchanged and it would try change of a secondary moderation ratio on the viewpoint of wear although there was no necessity in particular for exchange, it ranked next and was alike and it arranged.There is also no comparatively inconvenient place of the price, and since meat omission is carried out, it is lightweight.Although a Life is not known, if it can obtain at this price next time also, even if it will suppose that it is considerable pure and will repeat, it thinks good kana.
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
It purchases simultaneously with a Front sprocket. It purchased as a got repair part of NS-1. a existing Sprocket is exchange in that of which rusts, front and back rusts, and cannot come out of and use it, but has adhered to in the form
It purchases simultaneously with a Front sprocket.
It purchased as a got repair part of NS-1.
a
existing Sprocket is exchange in that of
which rusts, front and back rusts, and cannot come out of and use it, but has adhered to in the form also with a strange Chain.
The
drive system is decided by Brando who can trust it.
relief is carried out and it can fly.
(It is ... within legal speed.)
View detail
It purchased for final adjustment of KSR110. listen -- I give up also as an object for ず調整, and also regard using as it is as their being the goods which gave up and came out and were excellent in the Cost performance. one is exchanging Wheels
It purchased for final adjustment of KSR110.
listen -- I give up also as an object for ず調整, and also regard using as it is as their being the goods which gave up and came out and were excellent in the Cost performance.
one is exchanging Wheels and is, and since the color is a Gold, a black Sprocket is conversely conspicuous and is good touch!
View detail
Fits: HONDA XR50 Motard, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1
It purchases to final ratio setting of a mini bike course. A price and durability are number ones. Regrettable one is the weight. If it has in a hand although I think that it actually rides and does not feel weight differences, the product mad
It purchases to final ratio setting of a mini bike course.
A price and durability are number ones.
Regrettable one is the weight.
If it has in a hand although I think that it actually rides and does not feel weight differences, the product made from aluminum is a great difference.
View detail
Since 415 sizes are not sold easily, it surely becomes a mail order request. Since it is a product made from steel, a weight is just going to be worrisome, but influence is small if it becomes this size. Since it is the half the price made of a du
Since 415 sizes are not sold easily, it surely becomes a mail order request.
Since it is a product made from steel, a weight is just going to be worrisome, but influence is small if it becomes this size.
Since it is the half the price made of a duralumin, can he buy it freely?
View detail