Reviews
Fits: SUZUKI VOLTY, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI INTRUDER250, SUZUKI DR400
[a webike Monitor] -- three companies of prices which the meat omission lightweight Type was thought and it purchased unlike the SUNSTAR and the Afam by the picture, but were an ordinary Type are almost the same, and the rest cannot be durability -- ? --
[a webike Monitor] -- three companies of prices which the meat omission lightweight Type was thought and it purchased unlike the SUNSTAR and the Afam by the picture, but were an ordinary Type are almost the same, and the rest cannot be durability -- ? -- since this was not understood unless it used it, it was set to *3. View detail
It is in play [ of D-TRACKER125 ]. Since it was in the situation where it carries out and a stress builds very much in a trunk road that it is under [ first step / for reason ] if it was the present, but about 60 km/h came to have come out, it became
It is in play [ of D-TRACKER125 ].
Since it was in the situation where it carries out and a stress builds very much in a trunk road that it is under [ first step / for reason ] if it was the present, but about 60 km/h came to have come out, it became Massey for a while.
The fall of accelerating force is not worried so much.
Although it seems to be strong obviously, it is increase of 25g weight from 14T of normal by favor.
View detail
Fits: KAWASAKI KSR50, KAWASAKI KSR110, KAWASAKI KSR80, KAWASAKI KSR50, KAWASAKI KSR110, KAWASAKI KSR80
[Buying motive] In order to attach the rear tire of 120 pieces to -KSR-2 (98), this product Blue Point:2 mm offset sprocket 15 dish product number:BK035 correspondence vehicle type KAWASAKI/KSR50:KSR80:KSR110 is purchased. - 2 Millis pacer product num
[Buying motive] In order to attach the rear tire of 120 pieces to -KSR-2 (98), this product Blue Point:2 mm offset sprocket 15 dish product number:BK035 correspondence vehicle type KAWASAKI/KSR50:KSR80:KSR110 is purchased.
- 2 Millis pacer product number:BK036 KAWASAKI/KSRfor Blue Point rear sprockets 50:KSR80:KSR110 was purchased collectively.
The [feature of goods], etc. Unlike 250-cc class vehicles like KLX or KDX, a high torque bolt bundle, washer bending, etc. are needlessness, and the front sprocket of -KSR-2 can exchange them by removal and attachment of a circlip.
- the outside of circlip attachment -- carrying out -- if there are snap ring pliers, it is the best, but since this circlip is not so hard, attach and remove and it is easy at previous thin tongs etc.
[Grading of goods] Although it is a thing as which - convenience may be sufficient, since it is very expensive, it is a three stars.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
It purchased to Ape50TypeD. If it attaches, compared with an original manufacturer's product, GATA will think many [ GATA ]. Although it was exactly fixed to the shaft and the original manufacturer's product did not move, the kitaco article had wh
It purchased to Ape50TypeD.
If it attaches, compared with an original manufacturer's product, GATA will think many [ GATA ].
Although it was exactly fixed to the shaft and the original manufacturer's product did not move, the kitaco article had what is called GATA.
Eventually, the product made from a sunstar is used.
View detail
Fits: HONDA MONKEY, HONDA MONKEY R, HONDA MONKEY RT, HONDA GORILLA, HONDA DAX50, HONDA DAX70, HONDA CHALY 50, HONDA CHALY 70, HONDA GIORCUB, HONDA solo, HONDA JAZZ, HONDA CD50, HONDA BENLY50S, HONDA BENLY90, HONDA BENLY90S, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA LITTLE CUB, HONDA SUPER CUB70
It used before. Since it was the neighborhood when meat omission was carried out, it was satisfactory to use that there was a kana ? bali in which a bali is conspicuous just for a moment compared with the product made from a kitaco, but the product ma
It used before.
Since it was the neighborhood when meat omission was carried out, it was satisfactory to use that there was a kana ? bali in which a bali is conspicuous just for a moment compared with the product made from a kitaco, but the product made from a kitaco is used since this.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
[Attached vehicle type] At the time of benly 90S (frame numbered machine: HA03-1600XXX) [reason for purchase] chain exchange, he thought that he would exchange collectively and it purchased. Since the folio numbers of the pure sprocket of the benly 90
[Attached vehicle type] At the time of benly 90S (frame numbered machine: HA03-1600XXX) [reason for purchase] chain exchange, he thought that he would exchange collectively and it purchased.
Since the folio numbers of the pure sprocket of the benly 90S were 14 dishes of fronts (drive), and rear [ 35 dishes of ] (driven), they chose the thing of the same folio number.
[Comment and cautions at the time of attachment] Since it was not exchanging in about ten years since motorcycle purchase, he was surprised at change (it became very smooth) of a motion of the chain after exchange.
However, because its setting was bad and other components (chain and driven sprocket) selection was bad, a chain interferes in the root of a swing arm only slightly.
It may be better for the direction to worry to cope with choosing the big thing of one folio number etc.
Attachment was comparatively easy.
The set (there should just be 8 or 10 mm) of the ordinary socket wrench was used for the tool.
Work is exchangeable, if a crankcase is removed first (it is careful since there is a bolt with which *1 die length which removes three 8-mm hexagon head bolts differs) and the components which are fixing the drive sprocket are removed (two 10-mm hexagon head bolts are removed).
In addition, since the fixed components are attached to the purchased drive sprocket, they are exchangeable for a new thing.
View detail
Although it writes to 15 dishes compared with 14 pure dishes and there is admiration which is a little slow at the time of start, the cruise in a Fifth gear becomes quite easy. It stops having also worried slowness of start by plug exchange or muffler
Although it writes to 15 dishes compared with 14 pure dishes and there is admiration which is a little slow at the time of start, the cruise in a Fifth gear becomes quite easy.
It stops having also worried slowness of start by plug exchange or muffler conversion, and its margin in the high speed area increased more.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Since what was attached from the first was worn out, he bought 14 dishes of same things with it being pure. Since it will be cheap if it says that it is to just merely change components, since the number of what was attached was also 14, a degree of c
Since what was attached from the first was worn out, he bought 14 dishes of same things with it being pure.
Since it will be cheap if it says that it is to just merely change components, since the number of what was attached was also 14, a degree of comfort in particular did not change, but isn't it good?
View detail
Fits: KAWASAKI KSR50, KAWASAKI KSR110, KAWASAKI KSR80, KAWASAKI KSR50, KAWASAKI KSR110, KAWASAKI KSR80
Since dunlop TT92GP 120/80-12 were worn, the offset sprocket was attached. Since the First gear and the Fourth gear could be blown and as was worrisome, one dish was increased from 15 dishes of normal. It is impressed by the structure which does n
Since dunlop TT92GP 120/80-12 were worn, the offset sprocket was attached.
Since the First gear and the Fourth gear could be blown and as was worrisome, one dish was increased from 15 dishes of normal.
It is impressed by the structure which does not interfere in a dynamo case just before! Interference of a tire and a chain seldom changed.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
It attached to XR50 motard. Although the rear sprocket was changed into 33 dishes, the maximum high speed raised the front 3~4 km further by changing into 15 dishes from 14 dishes. However, we recommend you to purchase a power booster etc. simulta
It attached to XR50 motard.
Although the rear sprocket was changed into 33 dishes, the maximum high speed raised the front 3~4 km further by changing into 15 dishes from 14 dishes.
However, we recommend you to purchase a power booster etc. simultaneously, since acceleration falls.
Since it is cheap even if a price compares with the product of the other company, it is recommended.
View detail
Fits: YAMAHA RZ50, YAMAHA RZ50, YAMAHA DT50, YAMAHA MATE50, YAMAHA YB-1 FOUR, YAMAHA TZM50, YAMAHA TT-R90, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80
When putting in a bore up & big cab, he wanted to change and an order was placed. Structure was also good and I think that it is good.
When putting in a bore up & big cab, he wanted to change and an order was placed.
Structure was also good and I think that it is good.
View detail
Since the engine was covering the expenses [ K / about 45 ] of a roar, the suzuki choinori was made to consider an engine burden etc. and to raise one dish of front. The talk that the goods here attach and it is good is heard and purchased... Satisfie
Since the engine was covering the expenses [ K / about 45 ] of a roar, the suzuki choinori was made to consider an engine burden etc. and to raise one dish of front.
The talk that the goods here attach and it is good is heard and purchased... Satisfied, since the maximum high speed's having gone up for a while and a jarring engine sound decreased.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
It was used in CD50. Attachment is common to a transverse engine, and especially since it will be two bolt + plates if a cover is removed, a difficult thing does not occur. The maximum high speed goes up as a physical feeling, and acceleration fal
It was used in CD50.
Attachment is common to a transverse engine, and especially since it will be two bolt + plates if a cover is removed, a difficult thing does not occur.
The maximum high speed goes up as a physical feeling, and acceleration falls.
They are setting parts rather than calling it tuning parts.
I carry out engine bore up etc. and think that it is good for a direction to carry out the maximum high-speed up.
Although there may also be a vehicle type which is different in part, when it is the transverse engine vehicles of a honda (a cub, the monkey, a chaly, CD, etc.), it is to 16T to be put in without processing of a cover, and if it is not deleted since 17T interferes in a cover, or it is not processed, it is useless.
View detail
Fits: HONDA , HONDA Ape50, HONDA Ape100, HONDA XR50, HONDA XR100 Motard, HONDA CRF100F, HONDA XR100R, HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA DAX125
Attachment was easy as it merely exchanged for brand-name parts. Possibly 16T was better for the ape 100 of normal.
Attachment was easy as it merely exchanged for brand-name parts.
Possibly 16T was better for the ape 100 of normal.
View detail