Reviews
cheap
I was able to use it without any problems.
I'd be happy if it was a little lighter.
View detail
Change to Acceleration Spec.
I was looking for a Front sprocket for STREET TRIPLE, which I usually use.
I was looking for something a little bit smaller than the NORMAL to give it a little bit more acceleration, but the Japanese Large Hands Manufacturer didn't have it or didn't have it in their lineup, so I ended up with the Sprocket from an overseas brand called Driven. The delivery time was about a week and it was very helpful!
View detail
Fits: YAMAHA FZ750, SUZUKI GSX750 KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX750 KATANA, KAWASAKI Z900 (KZ900), KAWASAKI Z750GP, KAWASAKI Z750FX, KAWASAKI Z750FXII/III, KAWASAKI Z650, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000H, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI GPX750R
On the interference of Driven Sprocket
When I fit 18 Sprockets, the Chain doesn't fit because the Cover has too much Limit.
Because I made the rear tire thicker, I thought the offset should be larger, so I decided to use it.
I didn't get a call from him so I put a 16T ZEPHYR400 Sprocket on it. There is no picture of it because it is already installed.
View detail
Fits: HONDA TLR200, HONDA TLM220R, HONDA TLM200, HONDA RTL250
neither good nor bad
I bought this as a consumable item. The build quality is good. Now I expect durability. Good workability for replacement. View detail
Fits: YAMAHA RZ50, YAMAHA YB-1 FOUR, YAMAHA TZM50, YAMAHA RZ50, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE80, YAMAHA MATE50, YAMAHA MATE50, YAMAHA MATE50, YAMAHA MATE50, YAMAHA MATE50, YAMAHA DT50, YAMAHA TT-R90
I've just been proven wrong about the Net rumors.
I'm talking about Net's rumor Level. "I heard that the front sprocket of RZ50 fits CHOINORI. The inside diameter of Spline (16?) did not fit and I gave up to install. This size (17?) is the same as 80?Minimoto, Monkey, Cub and so on. I'll use it for Spare. View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA REBEL500, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA 400X, HONDA CB400F, HONDA CBR400R
Drive (Front) Sprocket
I am looking for Front Sprocket 16T for Honda400X. Thanks in advance for your help.
I'm sorry that this is not the purpose at all ... I would appreciate it if you could help me.
View detail
Fits: HUSQVARNA TX300 17-18, KTM 350XCF-W 12-17, KTM 450 EXC 03-18, KTM 450XC-F 8-18, HUSQVARNA FX450 17-18, HUSQVARNA FX350 17-18, HUSQVARNA FE501, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE125, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, KTM FREERIDE 350, KTM FREERIDE 250R, KTM FREERIDE 250F, KTM 530XC-W
Driven Sprocket, the standard for off-road motorcycles
[How is it used?
Motocross course, riverbed, HardEnduro, G650 XCOUNTRY, etc. The usage is 100% Off-road driving.
How was your experience with it?
I replaced the front sprocket on my 2016 Husqvarna TE250 as it was wearing out.
I bought the same number of knives (13T) as OEM because I had no complaints with NORMAL.
I've only had it for about 5 hours since I replaced it, so I don't know how much wear it has. To be honest, I couldn't tell the difference between OEM and DRC in terms of driving performance.
I'd rather not have a difference lol.
[Points to note]
The front sprocket on the 2016 Husqvarna TE250 is stopped by a large C-ring, not a nut.
This C-ring is quite solid, so it is useful to have a special tool to open the C-ring Firmly.
This time I borrowed it from a buddy.
View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
Trusted KITACO
Sprocket is available from many companies.
I bought Mr. KITACO from MAJOR place.
I think Sprocket is the Manufacturer of choice.
View detail
If you are bothered by it, the sound will be enough to bother you.
Used for vSTROM250.
It feels like it has more sound than the OEM. I've gotten used to it and I wear a Full face helmet so it's usually barely noticeable, but I think it would bother someone who is sensitive or right after wearing it.
I don't think it's only this Sprocket's fault because I changed Chain and front/rear Sprocket at the same time, but I think it might be better to use OEM or other company's quiet type Sprocket because there are other company's quiet type Sprocket with Rubber. It may be better to use OEM or other company's quiet type.
Also, and this is the biggest problem, but for some reason, changing the front and rear Sprocket and Chain at the same time reduced the fuel economy.
View detail
Fits: HONDA SUPERCUB C125, HONDA SUPER CUB110, HONDA MONKEY RT, HONDA MONKEY R, HONDA Solo, HONDA NSR80, HONDA NSR50, HONDA NSR mini, HONDA NSF100, HONDA NS50F, HONDA NS50R, HONDA NS50F AERO, HONDA MONKEY BAJA, HONDA MONKEY, HONDA NS-1, HONDA MAGNA50, HONDA JAZZ, HONDA GROM, HONDA GORILLA, HONDA LITTLE CUB
Drive Sprocket 16T
I wanted to run a little lower in the rpm when flushing at 50-60 km, so I made the change.
The Driven is still at 34T, so you can feel a slight acceleration and a drop in top speed 。 It feels like it can't be extended in 4th gear.
View detail
Fits: SUZUKI 250SB, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI VERSYS-X250, KAWASAKI Ninja250SL, KAWASAKI Ninja250, KAWASAKI KLX250, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, KAWASAKI Ninja250R, KAWASAKI KLE250
Stable SUNSTAR
It is used in ninja250. Because the number is the same, I feel that it is not so different, but I chose it because many people around me are SUNSTAR users. View detail
When in doubt, this is it
The NTB NTB Sprocket caught my eye, so I bought it on impulse this time.
As far as usability goes, I think it's safe to say that it's neither acceptable nor unacceptable
Maybe there are better products out there if you look for them, but as I am now
I'm under the impression that it doesn't have to be such a high quality product
The quality of the product itself is guaranteed to some extent, so if anyone is struggling with it, you might want to pick it up.
View detail
Fits: HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA Ape(100)(APE), HONDA BENLY CD90 (BENLY50), HONDA MONKEY125, HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB 90 (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB)
When in doubt, this is it
I bought the NTB NTB Sprocket this time and would like to Impression it.
The product is in line with the previous reviews I see on the net.
The quality of the product itself is guaranteed to some extent, so if anyone is struggling with it, you might want to pick it up.
View detail
Fits: KTM 525SX, KTM 495 MC 82-83, KTM 500 MX 85-88, KTM 500 SX 95-98, KTM 250 MX 90-92, KTM 250 GS 94, KTM 250 MX 89, KTM 250 MX 88, KTM 125SX, KTM 125SX, KTM 125SX, KTM 144SX, KTM 150SX, KTM 250 GS 92/93, KTM 200SX, KTM 200SX, KTM 240 MX 85-87, KTM 250 GS 89, KTM 250 GS 90, KTM 250 GS 91
Before you put it on, sir.
It is for high speed touring. I don't know if there are any holes to reduce the weight as shown in the sample photo. So it might be different depending on the number of cars. View detail
Fits: HONDA TLR200, HONDA TLM220R, HONDA TLM200, HONDA RTL250
I'm doing my job reasonably well.
I bought this because there is no OEM Sprocket available. The appearance is cool, but the uneven surface treatment makes it difficult to clean. Durability is yet to be judged, as it has only had a few miles on it. However, it is expensive. View detail
Fits: YAMAHA YZ250, YAMAHA WR250, KAWASAKI SUPER SHERPA, KAWASAKI KX250, KAWASAKI KLX250R, KAWASAKI KLX250 SR, KAWASAKI KLX250 ES, KAWASAKI KLX250, KAWASAKI KDX250SR, KAWASAKI KDX250R, KAWASAKI D-TRACKER250
Trust Brand
I purchased for KLX250 which is used widely from the usual commuting to touring and circuit driving.
I think the Size was the same as the OEM, etc. (Confirmation required)
The installation and tooth accuracy are naturally no problem.
I would also choose MADE IN SUNSTAR if there is nothing else to buy.
View detail
Fits: DUCATI 600SS, DUCATI 600SS, DUCATI 750SS, DUCATI 750SS, DUCATI 800 SS/SPORT 03-07, DUCATI 851 SPORT 88/89, DUCATI 851 SPORT 90, DUCATI 851 SPORT 91, DUCATI 851STRADA, DUCATI 888 SP/SPS 92-94, DUCATI 888 STRADA, DUCATI 900SS, DUCATI 900SS, DUCATI 900SS, DUCATI 906PASO, DUCATI 906PASO, DUCATI MONSTER S2R, DUCATI MONSTER600, DUCATI MONSTER600, DUCATI MONSTER600
You have the wrong model of car.
BIMOTA DB3 is included in the list of compatible models, but it cannot be used for DB3, except for XAM. I've seen the same mistake with Manufacturer, but really, give me a break! View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
When in doubt, this is it
KITACO KITACODrive Sprocket (Front) has arrived and I'd like to give you a quick in-play of how it feels to use it
It was a product I was curious about and purchased
Honestly, I have no complaints about the quality/price of the product and it's working normally
However, the product was not outstandingly good in any way
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail
Fits: YAMAHA YZF-R1 525 Conversion, YAMAHA TDM900, YAMAHA TDM900, YAMAHA FZ-8S, YAMAHA FZ-8NA, YAMAHA FZ-8N, YAMAHA FZ-8 FAZER, YAMAHA FZ-07
Installation requires caution
XAM's Homepage says that XAM itself had the wrong fit table If you do not bite Washer, Offset seems to be insufficient when installing Please be careful View detail
Fits: HONDA BENRY CD50, HONDA XR50 MOTARD, HONDA jolqab, HONDA Journo Clare, HONDA little cub, HONDA NS50F, HONDA NSR50, HONDA NSR80, HONDA TLM50, HONDA XR100 MOTARD, HONDA APE100 DX, HONDA APE100 TYPE D, HONDA APE100, HONDA APE50 DX, HONDA APE50 TYPE D, HONDA APE50, HONDA BENLY90, HONDA CB50JX, HONDA CRF80F, HONDA CRM50
It's hard to install
Although the surface of the product is etching
There is a deformation of the screw thread, which seems to be caused by this process
We couldn't install it
After setting up the tap and fixing the screw thread, the vehicle was finally installed
Shouldn't you have cut the screw pile after the Etching process?
View detail