Reviews
Fits: DUCATI 600SS, KAWASAKI SS900, DUCATI 888STRADA, DUCATI 900SL, DUCATI 750SS, DUCATI 900SS, DUCATI 851 SP3, DUCATI 851 SP2, DUCATI 851 SP1, DUCATI 851STRADA, KAWASAKI SS900, DUCATI MONSTER797, DUCATI MULTISTRADA620, DUCATI MONSTER695, DUCATI MONSTER696, DUCATI MONSTER800S, KAWASAKI SS800, DUCATI MONSTER620, DUCATI MONSTER620 DARK, DUCATI 620SPORT
The teeth are in good shape!
Sprocket from MADE IN SUNSTAR, which I have purchased so many times that I can't remember how many times I have already purchased it.
I have also purchased a Chinese Sprocket, which was quite expensive.
However, none of those cheap Sprocket products were decent.
Even those cheap ones are certainly usable, they don't crack or chip during use, and they are not less durable.
The roundness may be inferior to SUNSTAR, but the difference is not felt in driving, nor is the roundness so inferior that the tension of the Chain changes depending on the rotational position.
So why go to the trouble of using expensive MADE IN SUNSTAR, which is the life of Sprocket? Tooth Shape This is because the
Since the shape of the teeth is determined by standards, there are considerable differences when comparing new products, even though they appear to have the same shape.
The shape of the tooth, which extends upward from the bottom of the tooth, is particularly important, and as an eye test, there is about a 0.1mm difference in shape among the companies.
It can be driven securely by any SprocketManufacturer and will not snag or slip out.
However, the shape of this part is excellent for MADE IN SUNSTAR, and it is very smooth to hang on and off the chain.
This is an area that cannot be determined by turning the Tire, but only by actually riding the vehicle and applying the drive Torque.
In a poor Sprocket, the Chain Roller cannot move the teeth of the SukROCKET to the Smooth, which inevitably results in a snagging feel.
The difference is really miniscule.
Any Sprocket will go from a reduced Sprocket to a new Sprocket, so it will be Smooth and should be very hard to notice.
But if you change the new Sprocket and Chain several times during the day and compare the runs, you will notice that only the SUNSTAR has a smoother drive.
If I can buy MADE IN SUNSTAR, I will never buy another company's product again, especially a cheap Chinese one.
View detail
Fits: DUCATI 600SS, KAWASAKI SS900, DUCATI 888STRADA, DUCATI 900SL, DUCATI 750SS, DUCATI 900SS, DUCATI 851 SP3, DUCATI 851 SP2, DUCATI 851 SP1, DUCATI 851STRADA, KAWASAKI SS900, DUCATI MONSTER797, DUCATI MULTISTRADA620, DUCATI MONSTER695, DUCATI MONSTER696, DUCATI MONSTER800S, KAWASAKI SS800, DUCATI MONSTER620, DUCATI MONSTER620 DARK, DUCATI 620SPORT
Safe domestic production
[How is it used?
A Small stone, which I think was picked up by the Rear tire when driving, was unfortunately caught in the Chain and broke 1 pc of the Sprocket tooth, which has hardly been used yet.
It's a waste of money, but I have no choice but to replace it.
Was the one you received as per Image?
The Sprocket with the broken tooth was also MADE IN SUNSTAR, but the shape was slightly changed and the wall thickness of the part that fits into the Spline was thinner.
Because it is not a large rotation speed and the outside diameter is small, I think that there is no effect such as the reduction of the GYRO effect even if it is lightened, but it is good that it is light.
Even though it's thinner. "It may not be strong enough..." I guess my old one was too sturdy because it's so solid that I can't believe it.
Was the installation difficult?
The product accuracy is high, so it is not difficult under normal circumstances.
In the case of me, it is a special vehicle that cannot be used as it is (it is necessary to set 2mmOffset), so in such a sense, the degree of difficulty is very high though the compatible model of the thing purchased is for DUCATI900SS.
How was your experience with it?
SUNSTAR as usual.
The quality is totally different from the cheap products of Large land-based companies.
At first glance, there is no difference between the Large and the Made in Sunstar, but the shape of the teeth is correct, so you can tell by the small amount of resistance when you push and pull.
More specifically, the distance you can run empty when you cut the Engine and come back is completely different from Chinese products.
[Included Parts:were they on?
There's nothing there! (Of course, no problem)
[Was there anything that disappointed you?
In order to unite with the Spline fixed Washer, there is the Screw hole which does the Bolt stop, but this time the Screw was a little rough, or the Screw was difficult to hang on very slightly.
I tried to kidnap the first 0.1 pile or so lightly, but it was too hard because it was baked.
The screw hole itself is perfect because it goes through easily by hand from the other side.
Well, it's not a problem because you just have to be careful and apply it carefully.
Other items that would be helpful
Opinions and requests to Manufacturer
MADE IN SUNSTAR has always had a paper Package, but this is exquisitely tacky.
At least if you stop the White Package, it will look a little more luxurious.
Or, you could go for the cheapest printing of one color BlackInk on a bare Dan Ball color with the highest quality and rigor.
View detail
Fits: DUCATI 600SS, KAWASAKI SS900, DUCATI 888STRADA, DUCATI 900SL, DUCATI 750SS, DUCATI 900SS, DUCATI 851 SP3, DUCATI 851 SP2, DUCATI 851 SP1, DUCATI 851STRADA, KAWASAKI SS900, DUCATI MONSTER797, DUCATI MULTISTRADA620, DUCATI MONSTER695, DUCATI MONSTER696, DUCATI MONSTER800S, KAWASAKI SS800, DUCATI MONSTER620, DUCATI MONSTER620 DARK, DUCATI 620SPORT
I think it's good.
It is a product of Drive side. The tooth tip shape is slightly different from OEM, but there is no problem with installation. Compatibility with Chain is also good after installation and it is smooth and smooth. View detail