Reviews
Fits: Others
Excellent matching with bremboRCSMASTER
I installed it on a CBR250RR 2023 MODEL. the Handlebar is a kit from Over RACING, but I was able to install it without any problems.
Selected this product to match the brembo RCSMASTER that was already installed.:Pair (for Left and Right) Both can be fitted with Koken's AeroLever, which gives them a unified look and feel and looks great!
The fitting of the clutch cable is not good because it is not an exclusive design of the car model.
Since it is originally an AssistSlipper clutch, the lightness of the operation cannot be felt. The original clutch is quite light.
The rattling of the Pivot on the Lever is much larger than OEM and Eukanaya, Spec. It seems to be
Made in Japan, the texture and construction is very high quality. It also looks good. However, the price is a bit high considering the cost performance. It did not exceed my expectations.
View detail
![Mechanical Clutch Holder AVANZA [Avanza] Holder Only L-29mm](https://img.webike-cdn.net/catalogue/images/74753/g_1_TS.jpg)
Fits: Others
It's cool.
Clutch master and DesignMatch are also good.
Texture and lightness of Clutch are also excellent.
View detail
Fits: Others
Clutch Side is also unified with RCSMASTER
What made you decide to buy?
I had changed to brembo 19RCS Master Cylinder and wanted to unify the clutch side with RCS MASTER, but I had extra income, so I decided to use "KOKEN".:I purchased "Mechanical Clutch Holder L-29 Aero Lever Set". 。 I really wanted to go with bremboLeverSpec. but recently there is no bremboLever Kit for sale, so I bought Lever as Single Item. Well then. Why didn't I buy Holder Only?" is … The included AeroLever is a spare part in case of emergency!
[How was the installation?
At the conclusion … it was quite fiddly. it was easy to remove the OEM Clutch holder and Lever, since I had replaced the U-KANAYA Lever before. (Don't forget to loosen the Clutch Cable including the one on the body side before starting the work!) If the OEM Clutch holder comes off, Kohken:I am trying to install the Mechanical Clutch Holder, but the Outer end of the loosened Clutch Cable does not fit. (Sweat) If you force the work, it will cause scratches. After thinking about it, we separated the Mechanical Clutch Holder from the Lever, and put the Outer End on the Holder first. (ZX-6R uses the included Wire Spacer.) and align it with the PunchMark in the Handlebar, and then use the HolderBolt (7.8Nm) Next, attach the end of the ClutchInner cable to the lever that was removed and merge it with the Holder. Next, attach the end of the ClutchInner cable to the lever that was removed, and attach it to the holder to complete the process. (This is the same method as the Lever replacement process.) The Koken instruction manual does not go into detail, so if you are not comfortable with the work, you can leave it to PRO.
[work reference …]
Before loosening the nut that fixes the clutch cable on the body side, measure the length with Caliper before loosening it, so that it will be easier to adjust the clutch after the work is done. 。 It is also a good idea to lubricate the Clutch Cable as you remove it. 。 KITACOConvenienceParts for Roller Type Micro Switch:110"/3-pole Connector set (Black color) and processed to the same color and etc. Spec. as OEM. (Please make sure the Switch is working!)
How was your experience with it?
In the description field. It won't be as light as the 24mm Ratio, but lighter than the Normal." I couldn't see any change in the ZX-6R because of its AssistSlippers mechanism, which makes it very light even with the OEM clutch. However, I felt that the clutch was sharper and lighter than the OEM, which I may experience during long distance touring and city driving in traffic. 。
[Others]
Holder color was selected as no option. The color is not the same as brembo19RCS Master Cylinder, but it is close enough. Also, the RCS OEM clutch lever replacement and sticker will further enhance the compatibility.
View detail
Fits: Others
KOHKEN Mechanical Clutch Holder Avanza L-29mm
[How is it used?
I installed it in April 2022 and have been using it for almost 6 months.
Was the one you received as per Image?
As per Image
Was the installation difficult?
The switch needs to be modified, but the clutch holder can be simply attached.
How was your experience with it?
Amazingly lightens the Clutch!
[Included Parts:were they on?
Instruction Manual included
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Honda has 2-core Clutch wiring, but KOHKEN's Switch comes with 3-core, so you can check continuity if you have a tester.
View detail
![Mechanical Clutch Holder AVANZA [AVANZA] Holder Only L-34mm](https://global.webike-cdn.net/photo/impression/15/150b8287f1ad263864ff1337f0cfa4f5L.jpg)
Fits: Others
Better not to buy. Folding Type Clutch Lever that cannot be overturned
I used the Foldable Clutch Holder, and even though it says that the Brake lever for brembo corsa crota can be used, the cormorant was not able to be used. However, when I used it, it was a clutch holder which was not usable.
Quantity:As you can see in the photo of the 1pc. eye, if it collapses just a little, it will not collapse due to interference.
If it falls over, it is likely that the Lever will break or the Holder itself will be damaged.
Clutch lever will cost about 7,000 yen, but if the Holder is damaged, 50,000 yen will fly away.
It seems to be an obvious design error.
I tried to cut off the interfering part, but the other side of the cut off side was also interfering, and I gave up cutting off that side because it was the place where it would be easily seen if I cut off the other side. Folding Type Clutch Lever that cannot be overturned The product is to be used as a
I think this is a clear design error and should be recalled and replaced with a countermeasure.
We recommend that you do not purchase if you are considering purchasing.
View detail
Fits: Others
In conjunction with the brembo RCSMASTER conversion
I changed the brake to brembo rCS and also changed the clutch side to this.
As for the lightness of the clutch, the honest truth is that I don't know the difference because it is originally a light MONKEY125. In the future, when the engine is modified and replaced with a Reinforced Clutch, there may be a difference.
It looks like the color of Anodized is a little different due to the difference in material? It is not enough to be concerned about.
I like it because it gives a sense of unity around the Handlebar.
Short lever is chosen because it is a MONKEY lever, and finger 1 - Quantity:It is claimed to be for 2pc seating, but it is about the same as a normal short lever, so operability is not a problem.
The adjustment is easy to handle with Dial type, and the switch is attached, so it can be installed without a problem if you can connect the electrical system.
It's a good product if you can look past the high price.
View detail
![Mechanical Clutch Holder AVANZA [AVANZA] Holder Only L-29mm](https://global.webike-cdn.net/photo/impression/4b/4b897db4a43af4b1d6bda4fc8c484878L.jpg)
Fits: Others
What is the meaning of Retractable Lever?
I bought the brembo half lever and installed it, but the lever interferes with the holder and does not fold over, I sent it to the manufacturer for inspection but they said that is the way it is and I ended up buying the Retractable Lever which does not fold over. I think Foldable is the one that can be repaired by Lever only when it falls down. (It depends on how you fall, of course.) This is the best product I have ever purchased. It's a shame that the manufacturer didn't listen to me. If you buy it on the premise that it will not fall over, it will be good because the clutch will become lighter and the meat range will become a little wider and it will be easy to use, but I cannot recommend it. View detail
Fits: Others
To become light
Changed the brake side to brembo, it is much lighter than OEM. View detail
![Mechanical Clutch Holder L-29 [Holder Only]](https://global.webike-cdn.net/photo/impression/27/27edb2eb8eaee8d705534210661c98cdL.jpg)
Yay, it's installed! The hard work is satisfying enough.
Since I changed the Brake Side to brembo, I diverted the Clutch holder L-29 from the previous car to the Ninja1000SX.
The Ninja1000 is light enough to handle in NORMAL mode, and there is absolutely no need to make it any lighter, but there is no need to make it any lighter than it is in QUANTITY:Pair (for Left and Right) I have a disease that I want to align with bremboLever. (Lol)
I've considered the GALE SPEED before this, and it was tempting to choose the best one for me because of the large number of Lever types, but I'll save that for next time.
Installation, the experience I had earlier when I replaced the Ninja1000SX's Brake with a brembo will come alive here. After all, the signal line of the state switch of Clutch is necessary for the On-Off control of AutoCruise Control as well as Brake Side.
First of all, remove the OEM Clutch holder, but you need to adjust the body of the car because the adjuster on the holder side does not extend the cable.
Hi. Here's a shocking revelation:you have to remove the SIDE & lower cowl to adjust it!
I was aware of this from the beginning, but I doubted that there was a motorcycle with such a bad disassembly and maintenance, but I couldn't do it even though I tried many times.
If you come to the point of removing the OEM Clutch holder in some way, you can also remove the Switch.
The OEM Switch is an integral part of Harness, so you have to cut it off at the appropriate point.
The appropriate position should be aligned with the temporary assembly of the holder to be replaced.
After disconnecting the Harness, I used the Model 110 Connector again this time. It is important to note that the signal line of the new Clutch switch is not reversed on-off.
If you make a mistake, it will be a terrible mistake.
If you can connect the Clutch switch to the Harness on the car body side, it's just a matter of assembling and adjusting the Cable.
Don't forget to install the attached Spacer at the cable end and assemble it to the Clutch holder.
After this, adjust the length of Clutch by Cable.
The reason for this is that the Cable will be stretched as you use it, so it's easy to deal with that by adjusting the Holder side.
It is important to note that the outlet position of CableLine is slightly different between Koken's Clutch holder and OEM.
When I adjusted it, I adjusted quite a lot, so I was anxious and impatient during the adjustment process, but I was able to install it safely after using a little bit of adjustment on the Holder side as well.
Operation power is also slightly lighter, and Lever's pull charges are much lower than the OEM's, so it can be operated more lightly.
If I put back the arrangement of Harness of LeftSwitch to the original, it is the end, but Harness was bundled to Clutch Cable. Because it is impossible to return it to the original position due to the influence of the change of Clutch CableLine, Harness arrangement is reviewed and changed.
I didn't expect to spend so much time on replacing the clutch holder, but after all the hard work, I am satisfied with the result.
View detail
Well made, look good
I recommend this product and would buy again, superior to other brands. I would have liked to use bearings or some high-cost detail ... since it is not very económica. View detail
Fits: Others
The width of Clutch meat widens → Long time to grab → Tired of hands → get used to → ask what you bought for yourself
L29 (Short lever) Although it is a feeling of use, it is honestly subtle. Besides the events of the general comment, the cause of exhaustion is Lever too thick, I think that it is also in the position to put your finger, but even though thoughtfully mistaken, I gave up because it is Wire drawing after all. I did not match Mini bike. Also there is hang in the installation of Lever side Wire Stopper (Although it is written in the Instruction Manual, it is insufficient, Pivot gets little by little as you make Lever outwardly and it can be laid out Line).
Self-assured world of parentheses only (I should have done to Berlin).
I got caught on the top of the Lever part with kohken, and wanted to make it the simple is best, unnecessary thing.
View detail
Fits: Others
Since it is a high product, let's buy it after seeing the real thing
Large Light weight, rigid feeling, no wobble, smooth operation. The color of Lever holder was settled in Titanium, I liked Large. However, Small scratches are seen in Lever and Black of Adjuster, and politeness is not felt in the assembly of Aluminum, Jura. Consumers will be worried about this kind of things. View detail
![Mechanical Clutch Holder L-29 [Holder Only]](https://img.webike-cdn.net/catalogue/images/19291/cl-hld_holder_TS.jpg)
Fits: Others
It's pretty good..
bremboLever set (Out of print) Why is it cheaper to purchase separately with bremboLever than to purchase?
I am satisfied because the appearance will change.
View detail
Fits: Others
I did not want to lighten it, but it's pretty light!
The color of Standard Product was a little shabby so I tried it like NORMAL っ ぽ い Black.
It looks good, it became lighter than I thought.
However, there is too much play in Lever itself! It moves quite well up and down.
Besides that price, this accuracy is a structural problem.
Manufacturer here seems to be a lot of good products, but all I bought is Ha Gap.
View detail
Fits: Others
Used for ZEPHYR 750
If it is 24, it becomes considerably lighter, but Stroke becomes Large and the finger Quantity : Even if it is grasped by 2pc multiplication it is unlikely to enter Neutral.
This is the best if you want to lighten it anyway by four people.
Stroke is increasing without complaining especially when operating with 4-piece multiples, but it is light and high rigidity female Pass can be cleared.
I think that it will be lighter even at 29 Ratio because it is simply accurate and operativity is good. Finger Quantity : I think that 29 Ratio will be more comfortable with 2 pc multipliers.
It is far better than GALE SPEED and because there is no adjustment mechanism, the number of parts is small and there is almost no backlash.
There is no needless headache and private appearance is the best.
View detail
![Mechanical Clutch Holder L-29 [Holder Only]](https://global.webike-cdn.net/photo/article/86/1457188706586L.jpg)
Fits: Others
If looking and Custom focus, there are also purchases!
ACCOSSATORacing clutch,
GALE SPEEDWire Clutch Holder Kit,
I was worried but brembo's MechanicalClutch Leva
As it is currently installed, the price 32000 yen (tax-excluded) of
We selected only Holder L-29.
We only port the Lever division.
Holder comes with Clutch switch.
Clutch switch has 2 Patterns.
Wire play adjustment & Lever position adjustable.
The Clutch switch can be a Small Type,
I feel a little tired..
Three lines are connected, but when installing,
Treating it somewhat seems to break from the root Pin.
Especially finger Quantity : People who are 2 pc or 3 pcs,
Feeling the Wire to be drawn,
If you do not set Lever to a long distance
Clutch may not run out.
Making a little play makes it lighter,
No problem if you cut Clutch with 5 fingers.
Look, brembo's Brake MASTER and
It is GOOD because I feel unity.
However, the color was not better than I thought.
The price is also high (With Lever, tax included 40,000 yen over) ,
It was slightly lighter than NORMAL,
There is no need to forcibly change.
As stated above, if you are concerned about the appearance it is Recommendation.
Do not forget to buy Seal of ItalyMark on bespoke.
Depending on the model, Clutch
Because it seems there are times when it can not be cut,
Type of Holder is L-24 or L29 or L34
Let's choose firmly from Lineup.
View detail
Clutch operation has become lighter
It is exchanged according to bremboRCSBrake master.
The installation itself is a difficult task because it is only a task of detaching exchange and adjustment using the adjustment fee of Clutch Cable, but it was a little troublesome as Wiring connection of Clutch switch was checking Wiring on Service Manual.
I feel like I installed it, but first I understand that the Clutch operation got lighter. However, because it was not easy for Clutch to get worse, it was necessary to adjust the position of Lever far away. If you have a shorter finger, wearing Gloves for winter is not recommended as it will be poor in operability.
It looks like Brembo's Body color somehow, so it looks like he looks the same as you expect it is as expected.
It would have been better if the color and texture of the paint could be adapted to brembo....
View detail