Reviews
![VXSeriesChain 530VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3_G&G_P_togo_TS.jpg)
Fits: HONDA CRF1100L(Africa Twin), HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, KAWASAKI Z750B, KAWASAKI Z400FX, KAWASAKI Z400GP, KAWASAKI Z550FX, KAWASAKI Z400FX, KAWASAKI W1, KAWASAKI W1SA, KAWASAKI W3, KAWASAKI Z250FT, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800 CLASSIC, KAWASAKI Ninja ZX-9R, KAWASAKI VULCAN800, KAWASAKI Ninja ZX-9R
(Caution) LINKs are not enough for the model that is compatible with the product.
I made arrangements after confirming the model of the car to which it was compatible.
It was 2 LINKs short.
I'm sorry I didn't check the current Piece count properly.
Very disappointing
The following were listed as compatible models, but in reality they were 100 LINKs.
• Z550FX
? Year:80-82
Number of links on the OEM 98
I have wasted Gold, so I will give this rating.
View detail
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
Fits: DUCATI F3, HONDA CB350, HONDA CB360, HONDA CB400LC, HONDA CB400FOUR (air-cooled), HONDA CJ250T, HONDA CJ360T, HONDA CB400 SUPERHAWKIII CB400D, HONDA CB400T CB250N, HONDA CB400TII CB400T, HONDA CB400 SUPERHAWKIII CB400N, KAWASAKI 350SS MACHII (S2), KAWASAKI 350SS MACHII (S2), KAWASAKI 400SS MACHII (S3), KAWASAKI 500SS MACHIII (H1), KAWASAKI KH400, KAWASAKI KH500, KAWASAKI Z250 A1-4/B1 (78 - 80), KAWASAKI Z250 C1/2 G1/2 LTD, KAWASAKI Z250FT
Too bad …
I bought it because it was listed as compatible from MyMotorcycle registration, but the 104L was incorrect, the official version was 106L.
I placed the order again, but this Chain will be stocked for the opportunity to change the reduction ratio in the future, but I was very disappointed that it could not be completed that day!
View detail
![SUPER Non-seal Chain 428NZ Gold & Black [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/images/8031/428NZ_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S, KAWASAKI AR125
The LINK number notation is wrong. I bought it on faith and lost money.
Both Web!ke and Manufacturer's DID say CT125 incorrectly. (118Piece) I bought it believing the description and tried to exchange it, but it was too long and I could not fit it. I bought it believing the description and when I tried to exchange it, it was too long and I could not install it. I wish I could get my Gold back. Since I could not exchange it, I do not know the performance or durability. I am sorry, but I have to give it one star.
The notation of 118Piece for CT125 is a lie. Is the true OEMPiece number 108? Let's all not be fooled, I hope both Web!ke and Manufacturer will correct this soon.
View detail
No good
useless
Garbage box
Material has problems and is too soft.
View detail
![STD Series Chain 428HD Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/images/8031/428HD_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, YAMAHA WR125X, YAMAHA V80N MATE, YAMAHA V50N MATE NEWS, YAMAHA V50N MATE NEWS, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZ50, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, HONDA CB150R, KTM 85 SX, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX125
The fit is different.
I bought it because it was listed as 118 LINK in the fitment chart, but it was too long and when I looked it up separately, it was listed as 108 LINK. It is my fault for not checking, but I would like you to indicate the correct fit. View detail
Cheap and bastard
Overall, the accuracy is poor.
Defective threads in press-fit Bolt.
I managed to turn it by eyeballing it.
Insufficient strength of Crimp pin.
Probably raw iron. It does not appear to have been quenched and tempered.
After Crimp, Pin swelled up and could not be removed from press-fit Bolt.
In the end, I had to repurchase a Brand item. I threw it away.
Study fee.
View detail
Fits: HONDA CR125, HONDA CR125, HONDA CR250, HONDA CR250, HONDA CRF250 (03 - 10), HONDA CRF450 (02 - 08), HONDA CRF450 (09 - 11), HONDA CRF450X, HONDA CRM250R, HONDA CRM250R, HONDA CRM250R, HONDA TLM200, HONDA TLM220R, HONDA TLR260, HONDA XR200, KAWASAKI D Tracker, KAWASAKI KDX200R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition)
RK neglecting to check the goods.
I received a different item than I ordered.
I ordered 114 LINK and there was no mistake in my order history.
The Package also had a Sticker with 114 and numbers on it, so I felt comfortable and postponed the exchange.
When I tried to replace it after more than a month of purchase, it was obviously too short.
Counting the Piece count, there were only 102 LINKs.
It seems that webike will not take care of any initial defects unless it is within 30 days of shipment, so I will have to cry myself to sleep.
I honestly feel cheated, but I am at fault.
If it is an initial defect, we would like to have more days to respond.
View detail
I think it's cheap, but not cosmetically pleasing.
Maybe it's just something I happened to purchase.
Crimp pin was not very durable, and I could not successfully Crimp from about the 3rd Chain.
If only Crimp pins can be purchased at a discount, this would be fine.
I used to use KTC, but I would have preferred to buy that one, even though it was several times the price.
View detail
![STD Series Chain 420D Gold & Black [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_g_b_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Not conforming
I was relieved to see that the APE 100 was listed on the webike as a compatible model, so I purchased it, but the package of the product I received indicated that it was up to 90cc.
Is it because it's 130L or is it a misrepresentation?
The cause was unknown, but I was afraid, so I threw it into storage without using it.
View detail
Fits: APRILIA RS250 (Aprilia), APRILIA RXV450, APRILIA RXV550, APRILIA SXV450, APRILIA SXV550, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650GS Dakar, BMW F650, BMW G650 XCHALLENGE, BMW G650 XCOUNTRY, BMW G650 XMOTO, DUCATI 600SS, DUCATI 748, DUCATI 748, DUCATI 748, DUCATI 750 Santa Monica (88), DUCATI 750 Montjuich (87), DUCATI 750PASO
When I go for a walk.
I dissolve it in water and put it in a plastic bottle and hang it around my waist and carry it with me when I go for a walk. Since I started taking it every day without fail, the pain in my legs and knees has disappeared. View detail
Fits: DUCATI 600SS, DUCATI 748, DUCATI 748, DUCATI 748, DUCATI 750 Santa Monica (88), DUCATI 750 Montjuich (87), DUCATI 750PASO, DUCATI 750SS, DUCATI 750SS, DUCATI 851SP3, DUCATI 851STRADA, DUCATI 888 STRADA, DUCATI 888 STRADA, DUCATI 900MSS (93 - 97), DUCATI 900SL, DUCATI 900SS, DUCATI 900SS, DUCATI 900SS, DUCATI MONSTER S2R, DUCATI MONSTER400
It does not contain Grease to be applied to the JOYN.
The Grease applied to the Joint was not included.
Upon unpacking, I found that the Chain box was open and showed signs of having been opened.
I just contacted WeBike.
As for the Grease, we have confirmed that it is shipped from the supplier in the state that it is painted on the Chain, and it is not attached separately.
The answer was
This response to the lack of contents; are you a Manufacturer or a Webike?
In any case, I'm annoyed at the response for not knowing things too well.
View detail
Fits: DUCATI 600SS, DUCATI 748, DUCATI 748, DUCATI 748, DUCATI 750 Santa Monica (88), DUCATI 750 Montjuich (87), DUCATI 750PASO, DUCATI 750SS, DUCATI 750SS, DUCATI 851SP3, DUCATI 851STRADA, DUCATI 888 STRADA, DUCATI 888 STRADA, DUCATI 900MSS (93 - 97), DUCATI 900SL, DUCATI 900SS, DUCATI 900SS, DUCATI 900SS, DUCATI MONSTER S2R, DUCATI MONSTER400
Grease is not in.
When I opened the Corrugated cardboard of the packaging, I found that the Corrugated cardboard of the Chain was open and the Chain was showing its face.
There is no Grease when I start to install that there is no problem in quality.
Joint was in, though.
I had some leftover grease from last time, so I managed to install it.
If the box is empty, be careful.
But what kind of management does Webike have?
View detail
![ZVM-X Series Chain 520ZVM-X Gold [with Riveting (ZJ) Joint]](https://global.webike-cdn.net/photo/impression/34/343bb275c63f1f5263f81e0888ab1b2cL.jpg)
Fits: HONDA 400X, HONDA CBR400R, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, KAWASAKI Ninja 650, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI VERSYS, KAWASAKI VERSYS, KAWASAKI Z250, KAWASAKI Z650, HONDA 400X, HONDA CB400F
There is a strange noise.
Chain squeal is produced. The sagging was within expectation and I redid it several times, but no luck.
When I open the Axel at 40km/h or more, it makes a lot of noise.
I guess I should have gone with a more expensive one from another company.
View detail
![ERSeriesChain 520ERVT Gold [with Clip(FJ)Joint].](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P_TS.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
worst case scenario
The Joint seemed to have ZJ in it and the press fit was short, so the Clip did not stop.
It's unexpected that Mr. Daido would make such a mistake.
View detail
![STD Series Chain 420D Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
We were one LINK short.
I asked for 106 and when I tried to fit it, it was only 105. View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
The Rivet Joint was defective.
I bought it during the Spring Sale and opened it with high hopes.
When I installed it smoothly, I couldn't install it at the last minute because the Joint was not Rivet Joint.
Fortunately, I consulted with a nearby motorcycle shop and brought it in and had them install the Joint Parts separately.
I shudder to think that someone who is not familiar with chain installation bought this and started driving.
If you have any doubts after opening the package, we recommend that you contact your manufacturer or motorcycle shop immediately.
View detail
Not at all.
This is no good, I wanted to use the thin ones from the Pin Cutter and bought them, but they break easily. Even when I held the hole position firmly in place, it didn't work. In fact, I borrowed a friend's and tried to cut the Chain and it bent. I bought it as a substitute, but it was also bent. It's no good...it's very rare that it's no good for a DAYTONA. View detail
Underpriced TANAKA
I bought it at the same time as the EK520SRX2 and used it to replace the Chain, but I lost the Chain at the Crimp stage and the Rivet Pin was crimped and the Tool itself became useless.
That's a minimum quality product!
Thanks to that, all of our plans for a 4-day weekend are ruined, and we can't afford to lose 4,500 yen! I purchased the Crimp tool separately and am waiting for it to arrive, but I can't ride my motorcycle until then.
I'm most upset with myself for trusting it because I'm dealing with Webike.
I learned that sometimes fraudulent products are sold because it's only a net mail order.
View detail
disposable
It is used with the D Tracker 250 and has a chain size of 520.
It broke after one use.
Originally I would have liked to return it because it was defective, but the price was low and I was able to crimp it, so I give up.
View detail